d13bd0b77c
Hardware pwm ( #1283 )
...
* hard pwm
* fix, comments
* PC6-9 and PD12-15
* PB6-9
* dynamic frequency
* f7 mcuconf
* format
* relocate to common, support variable frequency
* error handling
* oops
* fix test build
* noop kinetis
* better guards
* guard for bl
* guards don't work if they have typos
* more mapping
* oops
* don't use for slow pwm
* enable pwm
* guard properly
* save a little memory
* use less mem
* correct timers
* all your ram are belong to us
* update limit & comment
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-05-28 16:02:41 -04:00
804f4b9db5
better file name
2020-05-25 13:02:05 -04:00
56c9d3ac40
proteus v12 progress
2020-05-24 13:27:14 -04:00
a2313a853c
switch some firmware warnings to errors ( #1465 )
...
* warnings as errors
* throw instead of exit
* test massaging
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-05-23 10:46:28 -04:00
6453e891e6
"TLE8888 SR Unexpected response" does not work as intended fix #1466
2020-05-22 22:56:19 -04:00
ae60a3e1b8
code style
2020-05-22 18:07:19 -04:00
5e202930f4
pre-sets progress
2020-05-22 13:12:16 -04:00
74ede6db64
would this help?
2020-05-22 00:25:48 -04:00
6da2edfe94
would this work?
2020-05-22 00:00:16 -04:00
8b00823a0f
HW test progress
2020-05-21 21:45:01 -04:00
4015c600e9
MRE pre-sets
2020-05-21 20:44:14 -04:00
871cee3092
test fixture progress
2020-05-21 18:36:32 -04:00
a390ec744e
no comments
2020-05-21 18:28:35 -04:00
76f3fdbc1c
Fresh generated - auto
2020-05-20 22:26:49 -04:00
9b1082f187
Merge remote-tracking branch 'origin/master'
...
# Conflicts:
# firmware/config/boards/kinetis/config/controllers/algo/auto_generated_enums.cpp
2020-05-20 21:22:46 -04:00
a2648c4d52
WBO
2020-05-20 19:01:55 -04:00
8128ed1290
Fresh generated - auto
2020-05-20 11:24:49 -04:00
f0bd4f033d
progress
2020-05-20 09:16:26 -04:00
19a8500a43
Clean-up analog channels in "unit" tests fix #1456
2020-05-20 08:55:38 -04:00
c5bba14da5
remove test clt/iat ( #1457 )
...
* remove test clt/iat
* remove warning since this code is nearly dead
2020-05-20 03:16:01 -04:00
ba8600307f
[Feature Request] Transmission Control #1454
2020-05-20 01:05:15 -04:00
08f395a608
fresh enums
2020-05-20 00:56:16 -04:00
ce2beafb5f
Redundant tps ( #1427 )
...
* add redundant sensor
* add tests
* add configure, info printing
* tests
* tests
* partial hookup
* fix
* fix
* bad makefile merge
* use second TPS config
* update test
* update test
* sensor names
* set second pin by default
* fix auto cal
* auto cal both sensors
* add reconfigure of secondary sensors
* gobblin' up your ram
* slow down write a little bit
* put split in debug gauge
* s
Co-authored-by: Matthew Kennedy <matthew@mck-mbp-15.local>
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-05-18 14:32:00 -04:00
56faab272f
hard-coding NB2 OEM sensor
2020-05-18 01:39:41 -04:00
aaf15e0fae
something too special with Kinetis?
2020-05-18 01:25:10 -04:00
9d535f4ce6
reducing magic constant copy/paste & MAP dialog progress
2020-05-18 01:15:13 -04:00
8253f5b931
better VVT progress
2020-05-15 21:33:25 -04:00
aa9def4a99
Minor fixes ( #1437 )
...
* cmpilation warning cleanup
* exti trigger: mark pins used, handle errors
2020-05-15 18:03:18 -04:00
03a632f3a7
VVT_INACTIVE
2020-05-14 23:13:32 -04:00
624ed955db
triggers: add Subaru SVX trigger (3 sensors) ( #1433 )
2020-05-14 20:40:47 -04:00
425d1a2554
smart gpios: remove dead code ( #1432 )
2020-05-14 16:15:55 -04:00
c47a0c3125
SD card for MRE
2020-05-13 23:26:28 -04:00
8a73c191bc
configuration for secondary (redundant) TPS sensors ( #1419 )
...
* add new fields
* add tps 2 secondary
* sensible error detection limits
* UI mods
* grey out as appropriate
* defaults
* either it's unused or its not
2020-05-10 16:13:15 -04:00
6fe2f7c38f
mck1117:secondary-tps-config progress
2020-05-10 10:11:51 -04:00
14b63774fb
that's embarrassing
2020-05-10 02:36:01 -04:00
e4cfc39b68
docs & clean-up
2020-05-10 00:59:32 -04:00
9c01614a46
34-2 3 cam Toyota wheel progress
2020-05-09 23:47:51 -04:00
7fdb6ca2be
rusEFI online engine crc
2020-05-09 22:43:39 -04:00
46a56f3799
Merge remote-tracking branch 'origin/master'
2020-05-07 00:56:22 -04:00
c0ce8b1b22
field useful for rusEFI online catalog
2020-05-07 00:55:59 -04:00
55159cae44
short term fuel trim: part 1 ( #1402 )
...
* add cell
* add stft cell tests
* add bit
* minimally generate
* config defaults
2020-05-06 21:00:40 -04:00
9d05182ae1
magic is around the corner
2020-05-06 14:00:08 -04:00
c5da481914
helping build
2020-05-05 15:47:14 -04:00
10903c4659
remove "plain MAP" mode ( #1398 )
...
* consumers
* enums, input, config
* java
* default config cleanup
2020-05-05 15:04:55 -04:00
573d6d2d55
pull out std air charge math ( #1397 )
2020-05-05 08:01:40 -04:00
7641c4f7d9
haha notes
2020-05-04 23:38:32 -04:00
d35ecea765
Nick says we need this MAP sensor
2020-05-04 19:08:36 -04:00
a91b97f6d4
getting all start-up issues together
2020-05-04 00:21:22 -04:00
04363877b4
refactoring: using constructor life-cycle to simplify initialization sequence
2020-05-02 23:15:48 -04:00
812184a572
reducing confusion?
2020-05-02 22:06:11 -04:00
65fde14800
Add firing order fix #1385
2020-04-29 16:46:59 -04:00
738e53442d
General purpose PWM: implementation & tests ( #1366 )
...
* config
* significant digits
* renumber enum, no need for a "none"
* ui
* impl base
* error handle MAP
* init & update
* don't need arg
* don't lie about sensor
* fix test build
* test stub
* initialize
* null check
* fix clamping
* test output
* types & enums
* don't need param
* test getOutput
* fix
* output pin instead of brain pin
* default config
2020-04-26 14:06:28 -04:00
6d0efc432e
allow overriding configuration ( #1341 )
...
* config overrides
* proteus too
* comment
* remove wno-error
* comment
2020-04-26 00:07:59 -04:00
00de5e8beb
Merge branch 'master' of https://github.com/rusefi/rusefi
2020-04-25 21:28:01 -04:00
52954733c7
Bosch vvt shape #1368
...
skeleton
2020-04-25 19:50:43 -04:00
a8bf8a8eb5
types & enums ( #1367 )
2020-04-25 18:26:29 -04:00
d5a76b5dda
Update chibios ( #1364 )
...
* Update ChibiOS
* Fix coexistance of ChibiOS and our flash drivers
* Add 'int' = internal prefix for all on-chip flash functions
This avoid conflict with ChibiOS functions available after
enabling HAL_USE_EFL
* Exclude ChibiOS flash driver from bootloader
* Makefile magic?
* Kinetis: fix build after ChibiOS update and switching to SMART_BUILD
* Bootloader now use SMART_BUILD too
2020-04-25 16:32:32 -04:00
3f4f0f9e7a
use the linker! ( #1363 )
2020-04-24 21:21:04 -04:00
e89b7b4b11
trigger emulator refactoring ( #1358 )
...
* trigger gen refactoring
* missed one
* fix makefile
* commentary
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-24 14:00:06 -04:00
39c84378eb
don't store self stim in config ( #1356 )
...
* kill
* add bench test
* fix
2020-04-23 22:38:14 -04:00
8f554e7a52
tle8888 modes corrected
2020-04-23 19:39:59 -04:00
b607400984
TLE8888 mode flexibility
2020-04-23 16:57:37 -04:00
89f1f78e0c
docs
2020-04-23 16:39:32 -04:00
447b64e2cb
Can vss updates ( #1345 )
...
* Vss over Can implementation proposal
Working for BMW e46
* fixed Firmware CI?
* kinetis fix.
* minor fixes
* Added W202 + fixed broken configs
- w202 Vel decoded
- added dbc checks
2020-04-22 13:40:08 -04:00
54f7ab268c
Vss over Can implementation proposal ( #1340 )
...
* Vss over Can implementation proposal
Working for BMW e46
* fixed Firmware CI?
* kinetis fix.
* minor fixes
2020-04-21 20:48:37 -04:00
c9d43283c2
initialize etbControllers ( #1338 )
2020-04-21 08:18:32 -04:00
0732600cb1
separate range for logging errors
2020-04-20 13:58:20 -04:00
2b4ca0496b
Better handling in case of ETB idle without ETB #1332
2020-04-19 21:51:27 -04:00
a89d819318
PWM name into warning message
2020-04-19 21:48:14 -04:00
35ffb13ca4
TS to show warning text
2020-04-19 21:42:00 -04:00
a2f5aaaf90
i am clearly distracted :(
2020-04-19 19:20:23 -04:00
f7327e0d71
still the cost of remix 66-2-2-2
2020-04-19 18:58:22 -04:00
898430518a
helping build
2020-04-19 18:45:40 -04:00
c1a4bd857b
TT_HONDA_K_12_1
2020-04-19 14:23:01 -04:00
d74e7f5d11
progress towards renix 66-2-2-2
2020-04-19 09:59:55 -04:00
89be50fd70
Renix 44-2-2
2020-04-18 22:20:17 -04:00
942403cec2
Fuel/ign correctino on new temp sensors ( #1318 )
...
* corrections
* test
* adv map
* tests
* cleanup
* lcd
* fsio
* unneeded
* more math
* last consumer
* cleanup
* fix kinetis
2020-04-18 18:45:30 -04:00
711c7c970a
Fresh generated - auto
2020-04-18 16:40:59 -04:00
3bc5824efd
unused config field ( #1314 )
2020-04-18 07:57:28 -04:00
83592f0dff
New clt consumers part 1 ( #1301 )
...
* idle
* CLT test prep
* idle target
* header
* air interpolate
* ancient comment
* fuel cut
* fuel cut, idle tests
* cleanup
2020-04-15 09:48:17 -04:00
59a007d21a
docs
2020-04-14 08:34:51 -04:00
95a681d80f
Update to Matt's MAF code for VE table tuning. ( #1295 )
...
* Update rusefi_lib
* Update fuel_math.cpp
Updated Matt's MAF code to include fuel table
* fixed missing include
* Replace get_specs_displacement
* ve2Map corrected
* ve2Map fix 2
* Fix for missing TS table
* Corrected standard air charge
* Math fix, PW now good
Still have minimal response from the VE table
* rusefi.input correction
* Added extra comment
* Ease of reading update
2020-04-14 01:21:48 -04:00
291197b43a
Add w202 canDash support ( #1292 )
...
* w202CanDash
added CanDash support for w202
* fixed kinetis
2020-04-13 08:11:06 -04:00
5da205089c
better error message
2020-04-12 23:24:46 -04:00
afc5f6c99b
fix maf ( #1287 )
2020-04-12 15:52:29 -04:00
9bbb7bc497
etb autotune ( #1274 )
...
* Astrom-Hagglund
* enums
* comments
* dead
* fix
* changed enum
* ts guard
* safety
* etb autotune debug channels
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-11 22:15:49 -04:00
cb2b699db6
DBG_TRIGGER_SYNC merged into DBG_TRIGGER_COUNTERS
2020-04-10 13:19:54 -04:00
c98cdc9c0a
cj125 progress
2020-04-08 23:14:21 -04:00
3abd181f6f
CLT/IAT/Aux in the new sensor world ( #1269 )
...
* hook up clt
* init test
* probably fix test
* aux temp
* relax checking
* more significant figures
* remove old aux temp
* hand generate
* claim RAM
* move to ccm
* subscribe
* info printing
* warnings
* raise high voltage failure threshold
* fix test
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-07 16:07:09 -04:00
95ef31da67
Goodbye, old TPS ( #1266 )
...
* clear out tps
* boost control
* aux valves
* launch, aux valves
* unused field
2020-04-05 19:33:33 -04:00
44bb09d1a4
yet more tps consumers ( #1258 )
...
* advance_map
* tests
* unneeded
* idle
* use driver intent instead
* and obd and lcd
* engine load
* ve lookup
* unused
* oops we needed that
* oops needed that too
* mocking
* test mocks
* oops
* helps to use the right sensor
* and cylinder cleanup
* fuel math
* typo
* old tests
* kill dead stuff
* cleanup
* more
* fix
* test
* s
* fix signature
* fix test
* comment
* priming pulse
* remove mock tps
* remove more dead
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-05 09:11:25 -04:00
606a7fff0d
More TPS consumers: VE lookup ( #1256 )
...
* advance_map
* tests
* unneeded
* idle
* use driver intent instead
* and obd and lcd
* engine load
* ve lookup
* unused
* oops we needed that
* oops needed that too
* mocking
* test mocks
* oops
* helps to use the right sensor
* and cylinder cleanup
* fuel math
* typo
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-04 08:41:09 -04:00
9a21262cf8
TPS consumers: idle and ignition and obd2 and lcd ( #1254 )
...
* advance_map
* tests
* unneeded
* idle
* use driver intent instead
* and obd and lcd
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-03 19:59:08 -04:00
856d4618cd
could this work?
2020-04-03 16:14:29 -04:00
9203f08072
flipped 60/2?
2020-04-03 00:44:54 -04:00
da7179b6b1
only correct timing in dynamic mode ( #1247 )
...
* only correct in dynamic mode
* redundant check
2020-04-02 08:54:55 -04:00
ffd262a7ba
CAN progress
2020-03-31 20:23:40 -04:00
f2dafeefe0
CAN progress
2020-03-31 20:08:30 -04:00
f559976a19
CAN progress
2020-03-31 16:52:52 -04:00
fe604f71b8
CAN progress
2020-03-31 16:49:19 -04:00
21e96141a8
f4-slave
2020-03-29 22:10:13 -04:00
8a3e47d9e6
refactoring + MAP broadcast consumption
2020-03-29 21:15:06 -04:00
0ac3e06149
cleanup extern mess ( #1237 )
...
* cleanup
* move outside define
2020-03-29 19:06:03 -04:00
79e5059c5a
critical error usability improvements
2020-03-28 20:14:17 -04:00
7645e033eb
un-generate ( #1228 )
2020-03-26 11:52:19 -04:00
b7033bbde9
Finally rename injector_central to bench_test ( #1229 )
...
* bench test rename
* rename consumers
* good lord what are all of these externs doing
* fix tests
2020-03-26 08:03:55 -04:00
b7b67a2a7f
Multispark implementation ( #1192 )
...
* multispark prototype
* only multispark if not cut
* typo
* do some reasonableish math
* consume cfg
* todo
* bad merge
* move math out of engine2.cpp
* engine state config
* consume generated
* use new
* hand generate
* doc, debugging
* debug channel names
* don't depend on rpmcalc
* safer, fix math
* tests
* default multispark config
* remove todo
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-03-26 01:49:36 -04:00
b9ea8d74ae
start/stop progress
2020-03-25 01:28:37 -04:00
736957a875
startStopDialog
2020-03-25 00:58:59 -04:00
45f5afe871
Remove old monitoring timestamps ( #1217 )
...
* remove monitoring timestamps
* adv map
* fuel calc
* map avg
* printing
* spark logic
* hip 9011
* new traces
* s
* missed a few
2020-03-24 20:19:19 -04:00
a910ab3da5
launch control #203
2020-03-24 19:55:12 -04:00
42834ba5ec
launch control #203
...
somewhat questionable code
2020-03-23 23:20:54 -04:00
d770290d0e
launch control #203
2020-03-23 22:30:47 -04:00
205fdcee66
launch control #203
2020-03-23 20:44:34 -04:00
e58f00692e
start/stop progress
2020-03-23 10:32:41 -04:00
4d617aa0fe
random header clean-up
2020-03-23 09:00:57 -04:00
d3071ea348
start/stop progress debug mode
2020-03-22 20:43:27 -04:00
a6c3b220d6
At least read all TPS inputs
2020-03-20 19:55:36 -04:00
37bdc68ff5
"rusefi CAN" config #1198
2020-03-19 09:22:16 -04:00
e18fb9419d
RemindMe! add 16 cylinder firing order on April 1st
2020-03-16 17:13:27 -04:00
1430adcc33
docs
2020-03-12 00:20:05 -04:00
b089596641
v12
2020-03-12 00:16:32 -04:00
cb37a6f51d
v12
2020-03-11 20:48:09 -04:00
98d402a66f
logicAnalyzerMode was unused, removing for now
2020-03-08 09:14:49 -04:00
d11121b9a7
giving C code access to CONFIG
2020-02-27 01:32:26 -05:00
a2a5b40ced
Support disabling most/all features ( #1162 )
...
* this flag did nothing
* guard features properly
2020-02-26 18:16:35 -05:00
6b3228b9f1
TEST_33816
2020-02-25 21:35:21 -05:00
6db8978667
Add single flag for omitting PnP configs ( #1157 )
...
* switch to single enable flag
* engine_configuration.cpp
2020-02-24 19:08:02 -05:00
e9ac797ac9
reviving FRANKENSO_QA_ENGINE
2020-02-18 17:53:56 -05:00
f929301d18
my take on useRunningMathForCranking
2020-02-18 10:47:39 -05:00
bc118ecede
code style
2020-02-10 09:29:11 -05:00
52f565f874
Sensor reconfiguration while running ( #1131 )
...
* reconfigure sensors
* docs
* doc
2020-02-08 06:22:23 -03:00
910a4d6706
cam/vvt decoder
2020-02-05 01:49:33 -05:00
3a99dcd6dc
move flash addr in to mpu_util ( #1123 )
...
* move flash addr in to mpu_util
* this _may_ work
* don't use offsetof
* proper header + defines
2020-02-05 08:06:38 +05:30
b94ba38efc
Some initial work at Launch/ALS
...
(cherry picked from commit 07b3a0632f6673ad57db5b2d6b8ad21674cf3509)
2020-02-02 12:17:06 -05:00
580e725d11
Boost pr ( #1114 )
...
* boost control
* cleanup
* Delete rusefi_config.txt
* Add files via upload
* Delete rusefi_config.txt
* Add files via upload
* Update rusefi.input
* Update boost_control.cpp
2020-02-02 03:56:21 -05:00
3d3c4c38f4
looking forward
2020-02-01 17:55:58 -05:00
6dd509a34b
opening the door to boost controller!
2020-01-31 14:23:15 -05:00
1735529a6b
refactoring: extracting DEEP_IN_THE_PAST_SECONDS contant
2020-01-31 01:21:56 -05:00
9bd819a18d
extracting class & codes clean-up
2020-01-28 00:16:33 -05:00
38afb582a1
reducing magic constants
2020-01-27 23:45:46 -05:00
9bd796ab6b
trigger refactoring
2020-01-26 12:02:54 -05:00
98c6198f1d
reducing code duplication
2020-01-26 06:28:33 -05:00
23631b5970
trigger refactoring
2020-01-26 06:12:01 -05:00
d1a4b39a5a
refactoring: de-coupling trigger decoder and engine
2020-01-26 03:48:25 -05:00
dfa8d9ccc9
refactoring trigger
2020-01-26 03:33:45 -05:00
4f5aeea301
trigger refactoring
2020-01-25 02:00:33 -05:00
ea82d82426
refactoring trigger
2020-01-23 13:39:50 -05:00
c7875876e5
refactoring - de-coupling trigger
2020-01-22 13:25:35 -05:00
f6ce9397db
refactoring
2020-01-22 01:22:44 -05:00
586eb9e6e3
code style: trying to get used to this syntax
2020-01-22 00:45:09 -05:00
f8cd2ad3ce
use NT_PER_SECOND instead of convert from microseconds ( #1107 )
...
* add NT_PER_SECOND
* missed a few
* inject tooth logger timestamp
* inject
2020-01-19 22:23:41 -05:00
8165bfc8ed
better constraint validation
2020-01-19 00:28:58 -05:00
a222ecdfe1
happy new year unification
2020-01-13 21:57:43 -05:00
406703b1b5
Gpio diagnostic ( #1100 )
...
* enums: add brain_pin_diag_e enum for pin diagnostic
* gpio core: add pin diagnostic call
* gpio: mc33810: add diagnostic support
* gpio: mc33972: add diagnostic support
* gpio: tle6240: add diagnostic
* pin_repository: output diagnostic data for gpio chips
* enums: kinetis: add brain_pin_diag_e enum for pin diagnostic
2020-01-12 10:20:10 -05:00
8200a3da64
AEM X-Series CAN Wideband Support ( #1096 )
...
* aem xseries
* parens to avoid operator precedence issues
* put in cfg
* disable that too
* fix sim/unit
* enough generated for ci
* this will guard correctly
2020-01-12 03:44:37 -05:00
63e3e84e08
happy new year
2020-01-08 00:02:40 -05:00
6703705a33
Pass action_s instead of callback/param ( #1084 )
...
* change action
* consumers
* fix test
* didn't mean to add those
* simplify
* fix simulator
* fix sim for real
* oy
* maybe this time the simulator will actually be fixed, for real
* don't rely on undefined behavior
2020-01-07 00:41:18 -05:00
499a39e88c
improvements around weird engine types
2019-12-28 23:22:16 -05:00
435928ca81
laughable gdi progress
2019-12-26 22:30:12 -05:00
daf1a0be21
wow dead stuff?
2019-12-24 00:14:10 -05:00
27e8c8f50b
oh this was OOOOLLLLLDDD
2019-12-24 00:10:28 -05:00
4605c64a07
that's not a worth a file
2019-12-24 00:03:53 -05:00
0cede6673f
adding simplicity
2019-12-23 22:40:23 -05:00
9ce2a4bb32
refactoring
2019-12-23 21:58:06 -05:00
0e231dd035
Revert "couple of dead lines"
...
This reverts commit dc20ee1d
2019-12-23 21:55:08 -05:00
dc20ee1da1
couple of dead lines
2019-12-23 21:44:38 -05:00
b08c0209fd
functional testing should not be that darn slow #1076
...
hopefully progress?
2019-12-21 23:27:54 -05:00
cf0b13041f
random refactoring: hopefully not changing byte size of any variables but clarifying/fixing type between ticks, US and MS
2019-12-21 21:11:09 -05:00
3ed388d1ad
refactoring & fixing build
2019-12-21 20:43:11 -05:00
c94532a697
boring test mule stuff
2019-12-15 22:21:49 -05:00
e443f579cb
Config generation handles padding after packed booleans (bits) wrong
...
#1057
refactoring
2019-12-14 15:33:30 -05:00
8cf255402f
codes clean-up
2019-12-14 00:14:36 -05:00
44c98029d7
fixing build is my most favourite time!
2019-12-13 18:02:24 -05:00
27f617686b
progress towards ETB controller mocking
2019-12-13 13:52:34 -05:00
2c296c0f18
etbActualCount logic to handle the scenario where only one ETB is present
2019-12-13 12:50:34 -05:00
f47a1a16d1
getting rid of boardConfiguration / binary compatible change
2019-12-11 17:48:55 -05:00
44fc8c466d
copyArray helper ( #1048 )
...
* add functions
* uses
* use for proteus
* do it for warmup mult
* do it for cranking settings
* cleanup
2019-12-10 18:04:50 -05:00
bcec694eb1
just a trivial massive rename: TriggerState > TriggerWaveform
2019-12-08 01:09:39 -05:00
a5ee6b13d5
Refactor Trigger System #635
...
injecting callback via parameters instead of nasty "bool isInitializingTrigger" field
2019-12-06 01:57:11 -05:00
431a21943b
The Big Refactoring of 2019: folder structure #723
2019-12-03 23:52:44 -05:00
5a299fcd9c
refactoring - updating name according to new reality
2019-12-03 14:39:11 -05:00
d9f777c669
codes fix, thank you AndreiKA
2019-12-03 09:05:57 -05:00
5c40bb4628
#490
2019-12-03 00:29:12 -05:00
b7011f875a
Base configuration for Proteus ( #1040 )
...
* cfg
* add enum value
* add ci
* actually build the board config
* this is pretty close
* proteus case
2019-12-02 23:54:40 -05:00
07b7b62bca
refactoring
2019-12-02 23:08:18 -05:00
b415508c70
codes clean-up
2019-12-02 20:16:41 -05:00
63d8f050bc
auxFastSensor
2019-12-02 17:49:01 -05:00
5ac023d987
misc clean-up
2019-12-02 10:03:50 -05:00
2738fefa48
that's how we can move all fields one by one from boardConfiguration to engineConfiguration
...
my approach is to move fields from the bottom of BC struct
2019-11-30 10:24:37 -05:00
349eac34de
better state validation, better error codes
2019-11-29 23:41:26 -05:00
c9b4189ab3
one step backwards :)
2019-11-29 01:39:02 -05:00
a9c52e084f
steps towards dual ETB
2019-11-29 00:26:17 -05:00
88d8768835
steps towards dual ETB
2019-11-29 00:23:15 -05:00
7220735530
Starter relay + Hardcoded 'FSIO' + simulator fix ( #1032 )
...
* Starter Relay: gui + built-in FSIO impl.
* Hardcoded 'FSIO' replacement for RAM-limited boards
* fix simulator
2019-11-25 20:08:01 -05:00
53eeb79ea9
unregisterOutput() + isPinOrModeChanged() + Stepper::stepPin+enablePin + Kinetis fix ( #1029 )
...
* Fix isConfigurationChanged() for EFI_ACTIVE_CONFIGURATION_IN_FLASH
* unregisterOutput() -> unregisterOutputIfPinOrModeChanged()
* clutchUpPinMode for unregisterPin()
* Fix Kinetis: EFI_ACTIVE_CONFIGURATION_IN_FLASH & EFI_MAIN_RELAY_CONTROL
* Stepper: enablePin & stepPin with modes support
2019-11-25 00:02:53 -05:00
706b4ca5ef
firing order tool integration
2019-11-24 23:49:05 -05:00
612649e191
Sporadic error: FATAL error: handleCycleStart #1030
...
more details
2019-11-24 21:45:32 -05:00
e8051c1807
more correct variable names
2019-11-23 23:49:39 -05:00
de963e880b
docs
2019-11-23 23:42:00 -05:00
18bb121cbe
aux valves unit test
2019-11-23 22:55:21 -05:00
af3118fd42
making progres on angle-based scheduling
2019-11-23 20:36:40 -05:00
304cc6acc3
making progres on angle-based scheduling
2019-11-23 19:47:53 -05:00
f15986b9aa
refactoring
2019-11-23 18:38:16 -05:00
a31057ec17
explicit list field to simplify code navigation
2019-11-23 17:04:51 -05:00
eaa42d1baa
consistency
2019-11-23 15:53:22 -05:00
0fd2d49aa8
docs
2019-11-23 14:14:17 -05:00
0a7535fb1f
Use templated array references ( #1027 )
...
* update defs
* consumers, use default params
* setArrayValues in tests
* floats
* test fixing
2019-11-22 23:27:24 -05:00
4cebc85cbf
refactoring
2019-11-20 01:35:08 -05:00
8fd603dca9
Merge remote-tracking branch 'origin/master' into perf-tracing
2019-11-19 16:28:58 -08:00
19bdb9a35f
docs & code formatting
2019-11-19 18:17:03 -05:00
a6e7b1455d
v12
2019-11-18 23:45:35 -05:00
80c6b88d2a
prometheus cleanup
2019-11-15 00:01:03 -05:00
41bdf469b2
#pragma once
2019-11-15 00:00:13 -05:00
cedb8d5861
M73
2019-11-14 23:58:04 -05:00
99bed7b613
unused code
2019-11-13 20:15:02 -05:00
a23f6bb23e
time to panic and revert more
2019-11-12 21:42:44 -05:00
b01a9e1388
use static asserts ( #1003 )
2019-11-12 00:39:38 -05:00
80ef79eded
this is not great :(
...
#639
#971
2019-11-11 22:19:35 -05:00
7c453fb199
Strange INJ1 signal behavior (when the frequency of scheduler's timer is less than 1MHz) fix #996
2019-11-10 23:54:08 -05:00
17a2847424
evil manual merge of https://github.com/DonaldBecker/rusefi
2019-11-06 18:26:50 -05:00
3b2d5c8c7f
Missing dwell altogether in some corner cases #796
...
only additional live data here
2019-11-05 23:36:33 -05:00
92d1842bd0
refactoring
2019-11-05 23:17:44 -05:00
30cfb96619
evil manual merge of https://github.com/DonaldBecker/rusefi
2019-11-05 20:07:55 -05:00
68db5ecdb1
progress towards #961
2019-11-04 22:52:37 -05:00
9c3492043d
progress towards #961
2019-11-04 22:44:52 -05:00
eae44843b1
custom codes cleanup
2019-11-04 09:20:00 -05:00
fdbe81121d
moving setDefaultFrankensoConfiguration down is the way of righteousness
2019-11-03 21:29:12 -05:00
591f19321d
nicer enum name
2019-11-03 21:19:13 -05:00
d8941eec12
moving setDefaultFrankensoConfiguration down is the way of righteousness
2019-11-03 19:36:56 -05:00
a325551edd
moving setDefaultFrankensoConfiguration down is the way of righteousness
2019-11-03 17:25:34 -05:00
10377c918f
moving setDefaultFrankensoConfiguration down is the way of righteousness
2019-11-03 17:17:43 -05:00
ef23be6893
Kinetis & TLE8888 compatibility & fixes... ( #991 )
...
* TLE8888: More compatibility & postTunerStudioState
* activeConfiguration & EFI_ACTIVE_CONFIGURATION_IN_FLASH fix
* Kinetis: jump_to_bootloader() impl.
* Kinetis: UART baudrate safety check
* Kinetis: OMG!..
2019-10-31 16:06:34 -04:00
db24091933
60/2 VW trigger has running issue on 19/10/19 snapshot fix #986
2019-10-30 20:51:20 -04:00
f453cc6737
smarter IAC PID
2019-10-30 09:27:12 -04:00
a8a0bc007a
docs
2019-10-26 21:53:22 -04:00
0fcf3bfa4e
refactoring: reducing code duplication
2019-10-21 23:47:40 -04:00
6f3bfcb099
fix wwae ( #980 )
2019-10-17 00:06:54 -04:00
7d73334b54
Revert "Revert "Performance improvement: call GetBaseFuel less ( #979 )""
...
This reverts commit 323904728d
2019-10-16 23:02:24 -04:00
323904728d
Revert "Performance improvement: call GetBaseFuel less ( #979 )"
...
This reverts commit aa9ec543
2019-10-16 22:29:19 -04:00
aa9ec543f4
Performance improvement: call GetBaseFuel less ( #979 )
...
* Remove extra calls to getInjectionDuration
* increase callback frequency
2019-10-16 22:13:10 -04:00
a7ea155633
preparing for #973
2019-10-16 22:10:38 -04:00
89ca9a0406
Merge remote-tracking branch 'upstream/master' into perf-tracing
2019-10-14 23:45:39 -07:00
cdf827a20a
preparing for #961
...
better code style
2019-10-15 02:06:15 -04:00
730aaca3ea
preparing for #974
...
code comments & refactoring
2019-10-14 16:04:28 -04:00
97d848bb3e
profile all the things
2019-10-13 13:14:08 -07:00
c938b0d374
preparation for #961
...
more unified access to pre-calculated value
2019-10-13 09:59:06 -04:00
076b10fcb6
experiment
2019-10-11 17:43:21 -07:00
abfdfe6896
preparation for #961
...
more unified access to pre-calculated value
2019-10-10 08:25:58 -04:00
2c8a2b61a5
preparation for #961
...
more unified access to pre-calculated value
2019-10-10 08:16:21 -04:00
a5f09ef378
preparation for #961
...
macro as a syntax sugar for method invocation
2019-10-10 07:37:37 -04:00
821ca6156f
move tsOutputChannels to header ( #970 )
2019-10-08 21:02:51 -04:00
c5f12fbcd9
I got carried away, but DEAD CODE?!
2019-10-08 03:14:21 -04:00
875fb3d1bc
something is over-complicated here? looks like two classes should become one?
2019-10-08 02:56:19 -04:00
415de92543
something is over-complicated here? looks like two classes should become one?
2019-10-08 02:35:21 -04:00
5d6a329c80
wow, dead field
2019-10-08 02:17:32 -04:00
54fe92e534
really not clear what is the best place for these classes
2019-10-08 02:13:52 -04:00
f189bbab04
refactoring
2019-10-08 02:01:41 -04:00
ba59ef00e7
docs & refactoring
2019-10-08 01:49:42 -04:00
74c8b59e44
typo & better field name
2019-10-08 01:36:03 -04:00
15ae9b1580
fancy C++ s/NULL/nullptr/
2019-10-08 01:26:35 -04:00
4c1c497bbc
refactoring: smarter C++ initialization
2019-10-08 00:27:49 -04:00
9b1dc07ae1
Simplify thermistor config ( #962 )
...
* simplify thermistor config
* fix test
2019-10-02 21:00:10 -04:00
9a961fd0c2
do not let "Use fixed baro corr from MAP" kill VE fix #960
2019-09-29 09:58:29 -04:00
7d68b3d829
firing order 1-2-7-8-4-5-6-3
2019-09-28 10:25:57 -04:00
97e0270b1c
ETB is sticky around zero and does not want to close all the way #943
2019-09-22 23:28:11 -04:00
cfbf5e0b12
ETB target is using integer values #945
...
refactoring - ADC mocking is a mess
2019-09-22 17:43:00 -04:00
f65fc4fec1
ETB target is using integer values #945
...
refactoring - ADC mocking is a mess
2019-09-22 17:39:13 -04:00
658dac889c
ETB target is using integer values #945
...
refactoring - ADC mocking is a mess
2019-09-22 09:56:06 -04:00
13fd4c2fc5
Merge branch 'master' of https://github.com/rusefi/rusefi
2019-09-22 08:45:03 -04:00
7710df4fed
ETB target is using integer values #945
...
refactoring
2019-09-22 08:44:51 -04:00
4c39a207a9
s/NULL/nullptr/
2019-09-22 08:22:35 -04:00
53ae54e8cc
ETB target is using integer values #945
...
first we will write a unit test
2019-09-22 00:16:46 -04:00
dfcc9dba04
add sensor framework, tests ( #929 )
...
* add framework, tests
* move oil pressure to new way
* add init logic
* brackets on the same line
* spaces -> tabs
* spaces -> tabs for tests
* bracket on same line
* hook up sensor mocking
* add nan check
* fix nan check
* I wrote an essay
* casing
* only init if we have a sensor to init
* style, actually call init
* format
* fix casing
* typo
* implement linear sensor
* wire up producer
* smarter limiting
* setup comments
* add reporting
* doxyfile
* oops
* add adc subscription
* clarity
* fix logic
* multiply voltage
* test styling
* test guards
* remove dependencies
* linear sensor test
* remove unused
* fix merge
* format, implicit convert op
* explicit
* format tests
* fix merge
2019-09-21 14:33:38 -04:00
50850ca0c9
fixing bug from yesterday
2019-09-21 11:09:03 -04:00
aa8d0eb640
configurable SD card logging speed
2019-09-20 20:18:22 -04:00
f2e67b05c0
unit tests progress
2019-09-20 00:25:43 -04:00
0b5a49392f
refactoring
2019-09-20 00:17:00 -04:00
d83ed085e8
unit tests progress
2019-09-19 22:56:54 -04:00
317ec8d752
unit tests progress
2019-09-19 08:05:23 -04:00
eb885c33bf
kill ( #935 )
2019-09-14 21:20:36 -04:00
0a92693729
Most important feature: VAG W12 firing order
2019-09-14 14:47:22 -04:00
f0427360bf
Delayed A/C compressor switch #922
2019-09-11 20:46:50 -04:00
3389caa1e4
one step back :) instant RPM does not look right
2019-09-10 21:35:10 -04:00
3d85de7ee5
fatalErrorPin setting is not used #926
2019-09-09 21:34:15 -04:00
50e0887c96
Delayed A/C compressor switch #922
2019-09-08 21:05:03 -04:00
2b64e34313
Reinitialize TLE8888 if it resets #904
...
nasty "solution"
2019-09-06 20:30:27 -04:00
d5dfc3e658
NB2 progress, ETB Live Docs progress
2019-09-01 19:37:58 -04:00
8be592f3d4
Live Data progress
2019-09-01 13:56:46 -04:00
e885079de1
unified names for generated headers
2019-08-31 23:12:39 -04:00
9ce7c4d7da
NB2 MRE
2019-08-31 18:36:44 -04:00
f533617b29
LiveData progress: isChanking & hasEtbPedalPositionSensor
2019-08-31 17:07:21 -04:00
afdeecb87e
progress towards idle unit test
2019-08-29 23:50:20 -04:00
6df2afface
cranking fuel live data fix #911
2019-08-28 00:29:55 -04:00
a8f7a8965b
cranking fuel live data #911
2019-08-26 23:41:04 -04:00
92f371c121
new feature: check engine light to blink on trigger synchronization
2019-08-18 15:53:38 -04:00
81cd1df0cc
refactoring: engine sniffer magic constants
2019-08-18 15:04:02 -04:00
5ffa32185f
refactoring: extracting common magic constants
2019-08-18 12:14:33 -04:00
15258503aa
WTF is wrong with MRE_miata_na6 config? operationMode complexity #898
...
actually ignoring setting for well known triggers
2019-08-17 22:00:01 -04:00
eb35cf3deb
TLE8888 should be re-initialized every time we get +12 volts #901
...
extremely ugly solution but it it works at least with LED blinking test
2019-08-16 23:00:28 -04:00
6c45dfbc50
new 4 cylinder firing order!
2019-08-15 19:36:16 -04:00
714af981e4
MRE_MIATA_NB2
2019-08-13 19:15:24 -04:00
946374184e
WTF is wrong with MRE_miata_na6 config? operationMode complexity fix #898
2019-08-08 23:11:56 -04:00
9112b7f797
WTF is wrong with MRE_miata_na6 config? operationMode complexity #898
...
fatal error is the best I can come up with quickly
2019-08-08 22:57:22 -04:00
dfeac28299
current toolchain does not work great with current rusEfi code, two methods with same name are hard for full text search :(
2019-08-08 22:33:52 -04:00
eef4fbde9b
fixing build & taking a safer route
2019-08-08 22:12:51 -04:00
6043c93372
WFT is wrong with MRE_miata_na6 config? operationMode complexity #898
...
fancy smansy unit test with some C++11
2019-08-08 21:27:57 -04:00
81d41f091d
poke
2019-08-08 20:32:00 -04:00
334f021137
WFT is wrong with MRE_miata_na6 config? operationMode complexity #898
...
more refactoring
2019-08-08 00:32:31 -04:00
f6971c2bea
WFT is wrong with MRE_miata_na6 config? operationMode complexity #898
...
refactoring to begin with, zero logic change
2019-08-08 00:19:09 -04:00
ca1ca643d0
refactoring: better enum name
2019-08-07 22:20:16 -04:00
a3dfd5f8c6
NA6 MRE details
2019-08-06 17:59:02 -04:00
67637cb1b5
better method name
2019-08-06 17:12:15 -04:00
456cc84181
fixing unit tests build
2019-08-05 23:36:18 -04:00
1e64c5a67f
MRE test setup
2019-08-05 23:00:35 -04:00
d57779b686
F7 nucleo does not work?
...
funny, it was about some very unused feature
2019-08-02 01:36:02 -04:00
9d3e201193
microRusefi Default Configuration ( #895 )
...
* poke
* working MRE
* why was this on?
* comment, cleanup
* default silent trigger error on
* comment
* remove extra
* sensible default
2019-08-01 22:27:23 -04:00
efb5e0377a
MRE is getting closer!
2019-07-25 21:39:39 -04:00
24e580f4b9
removing least useful engine configurations
2019-07-25 00:03:57 -04:00
e01d1f1560
fixing build?
2019-07-24 23:41:26 -04:00
f2e1858a95
fixing build?
2019-07-24 23:16:17 -04:00
d253d07732
nevermind
2019-07-24 22:37:27 -04:00
d4c28ecc69
setDefaultBoardConfiguration shouldn't have Frankenso pinout #852
2019-07-24 22:33:30 -04:00
00ff37947d
setDefaultBoardConfiguration shouldn't have Frankenso pinout #852
2019-07-24 22:00:48 -04:00
ac18459e3f
setDefaultBoardConfiguration shouldn't have Frankenso pinout #852
...
merging methods since always invoked together
2019-07-24 21:24:39 -04:00
ffdd37021f
setDefaultBoardConfiguration shouldn't have Frankenso pinout #852
2019-07-24 21:15:18 -04:00
733478bd8a
live docs for idle state
2019-07-21 18:34:37 -04:00
48fe6c2d5d
nicer status codes for future human-readable status set
2019-07-21 14:06:51 -04:00
a2f2a677b4
Remove warmup afr pid ( #879 )
...
* config changes
* actually remove from config
* rip out implementation
2019-07-18 18:26:18 -04:00
7cacc37fcc
FIRMWARE_ID
2019-07-13 14:08:08 -04:00
94f970ff13
one dead line
2019-07-13 09:18:09 -04:00
fd8f70d8c4
Annotations in C++ code to produce formulas in rusEfi console #807
2019-07-13 09:00:03 -04:00
705df36b0e
better variable names & fixing build
2019-07-13 08:19:00 -04:00
fbea3cba7d
a bit of dead code
2019-07-13 08:03:13 -04:00
c8e3378ff7
Annotations in C++ code to produce formulas in rusEfi console #807
...
typo & refactoring: splitting class
2019-07-12 23:15:52 -04:00
7c4ff20a1d
Annotations in C++ code to produce formulas in rusEfi console #807
...
wall wetting
2019-07-12 22:51:59 -04:00
3b670a4107
Annotations in C++ code to produce formulas in rusEfi console #807
...
refactoring wall wetting
2019-07-12 22:34:38 -04:00
756dec106a
support multiple VVT sensors #885
...
new fields & packing configuration. bumping configuration version
2019-07-12 14:24:45 -04:00
4633f032ed
refactoring - type/macro name/docs
2019-07-12 07:48:28 -04:00
e4a0a0ae91
Fix some maf logic ( #880 )
...
* fix maf
* thank you vscode for mangling ANSI -> utf8
2019-07-10 09:14:47 +03:00
0b52f5b542
Template-ize bin/value length for interpolation ( #878 )
...
* update consumers
* tests
* whitespace
* format
2019-07-09 21:16:36 +03:00
56fb8531a4
More portability (GPIO_F/G + auto_generated_enums) ( #876 )
...
* GPIO ports F and G are not everywhere
* auto_generated_enums path flexibility
2019-07-09 05:29:03 -04:00
2c515f13a9
user is unable to start with zero fuel - at least showing a warning
...
https://rusefi.com/forum/viewtopic.php?p=33761#p33760
2019-07-06 20:45:47 -04:00
5d2afd2331
refactoring: better file name
2019-07-06 20:15:49 -04:00
e309e223aa
Refactoring: OS access should be explicit #867
2019-07-04 03:57:21 -04:00
777eb532dc
Refactoring: OS access should be explicit #867
2019-07-03 21:48:04 -04:00
f2a034b5aa
Annotations in C++ code to produce formulas in rusEfi console #807
2019-06-19 22:34:11 -04:00
35d3cc0ac4
docs/type safety
2019-06-19 21:24:09 -04:00
e6b0e0625a
Utility class which writes same line both to stdout and file
2019-06-17 20:21:32 -04:00
d90c6ee1a3
Annotations in C++ code to produce formulas in rusEfi console #807 ( #847 )
...
* Annotations in C++ code to produce formulas in rusEfi console #807
firmware part of the change
* removing unneeded stuff & fixing unit test compilation
* not complete better unit test compilation fix :(
* better C++ usage
2019-06-17 12:18:55 -04:00
Matthew Kennedy
rusefi
dron0gus
shadowm60
rusEfi
OrchardPerformance
ola
andreika-git
Matthew Kennedy
rusefi