1.2 KiB
1.2 KiB
1 | ############# MM SETUP ############### |
---|---|
2 | #WITHOUT CAN WAKEUP (enabled O2S input) |
3 | ############# MM SETUP ############### |
4 | # remove the jumper connection from VCC_PP1 to +5V: we need +12v power supply for push-pull outputs. |
5 | # STM32 |
6 | # being cheap since no code for accelerometer |
7 | #board ID capacitor shortage |
8 | # DC-DC Inductor |
9 | #LS |
10 | #mux |
11 | # TLS115 |
12 | #20k x4 |
13 | #Green LEDs |
14 | # fuses |
15 | #20MHz crystal |
16 | #do not populate second CAN transceiver |
17 | #non-JLC components |
18 | #main connector |
19 | #include hellen-one/board_id/generated/board_id_154hyundai-d.csv |
20 | #include bom_pullups_hellen154hyundai-d.csv |