A B C E F G I L M N O R S T W

A

addDataListener(SerialPortDataListener) - Method in class com.fazecast.jSerialComm.SerialPort

Adds a SerialPortDataListener to the serial port interface.

B

bytesAvailable() - Method in class com.fazecast.jSerialComm.SerialPort

Returns the number of bytes available without blocking if SerialPort.readBytes(long, byte[], long) were to be called immediately after this method returns.

bytesAwaitingWrite() - Method in class com.fazecast.jSerialComm.SerialPort

Returns the number of bytes still waiting to be written in the device's output queue.

C

clearBreak() - Method in class com.fazecast.jSerialComm.SerialPort

Clears the BREAK signal from the serial control line.

clearDTR() - Method in class com.fazecast.jSerialComm.SerialPort

Clears the state of the DTR line to 0.

clearRTS() - Method in class com.fazecast.jSerialComm.SerialPort

Clears the state of the RTS line to 0.

closePort() - Method in class com.fazecast.jSerialComm.SerialPort

Closes this serial port.

com.fazecast.jSerialComm - package com.fazecast.jSerialComm

E

EVEN_PARITY - Static variable in class com.fazecast.jSerialComm.SerialPort

F

FLOW_CONTROL_CTS_ENABLED - Static variable in class com.fazecast.jSerialComm.SerialPort

FLOW_CONTROL_DISABLED - Static variable in class com.fazecast.jSerialComm.SerialPort

FLOW_CONTROL_DSR_ENABLED - Static variable in class com.fazecast.jSerialComm.SerialPort

FLOW_CONTROL_DTR_ENABLED - Static variable in class com.fazecast.jSerialComm.SerialPort

FLOW_CONTROL_RTS_ENABLED - Static variable in class com.fazecast.jSerialComm.SerialPort

FLOW_CONTROL_XONXOFF_IN_ENABLED - Static variable in class com.fazecast.jSerialComm.SerialPort

FLOW_CONTROL_XONXOFF_OUT_ENABLED - Static variable in class com.fazecast.jSerialComm.SerialPort

G

getBaudRate() - Method in class com.fazecast.jSerialComm.SerialPort

Gets the current baud rate of the serial port.

getCommPort(String) - Static method in class com.fazecast.jSerialComm.SerialPort

Allocates a SerialPort object corresponding to the user-specified port descriptor.

getCommPorts() - Static method in class com.fazecast.jSerialComm.SerialPort

Returns a list of all available serial ports on this machine.

getCTS() - Method in class com.fazecast.jSerialComm.SerialPort

getDescriptivePortName() - Method in class com.fazecast.jSerialComm.SerialPort

Gets a descriptive string representing this serial port or the device connected to it.

getDSR() - Method in class com.fazecast.jSerialComm.SerialPort

getEventType() - Method in class com.fazecast.jSerialComm.SerialPortEvent

Returns the type of serial port event that caused this object to be created.

getFlowControlSettings() - Method in class com.fazecast.jSerialComm.SerialPort

Returns the flow control settings enabled on this serial port.

getInputStream() - Method in class com.fazecast.jSerialComm.SerialPort

Returns an InputStream object associated with this serial port.

getListeningEvents() - Method in interface com.fazecast.jSerialComm.SerialPortDataListener

Must be overridden to return one or more desired event constants for which the SerialPortDataListener.serialEvent(SerialPortEvent) callback should be triggered.

getNumDataBits() - Method in class com.fazecast.jSerialComm.SerialPort

Gets the current number of data bits per word.

getNumStopBits() - Method in class com.fazecast.jSerialComm.SerialPort

Gets the current number of stop bits per word.

getOutputStream() - Method in class com.fazecast.jSerialComm.SerialPort

Returns an OutputStream object associated with this serial port.

getPacketSize() - Method in interface com.fazecast.jSerialComm.SerialPortPacketListener

Must be overridden to return the desired number of bytes that must be read before the SerialPortDataListener.serialEvent(SerialPortEvent) callback is triggered.

getParity() - Method in class com.fazecast.jSerialComm.SerialPort

Gets the current parity error-checking scheme.

getPortDescription() - Method in class com.fazecast.jSerialComm.SerialPort

Gets a description of the port as reported by the device itself.

getReadTimeout() - Method in class com.fazecast.jSerialComm.SerialPort

Gets the number of milliseconds of inactivity to tolerate before returning from a SerialPort.readBytes(byte[],long) call.

getReceivedData() - Method in class com.fazecast.jSerialComm.SerialPortEvent

Returns any raw data bytes associated with this serial port event.

getSerialPort() - Method in class com.fazecast.jSerialComm.SerialPortEvent

Returns the SerialPort that triggered this event.

getSystemPortName() - Method in class com.fazecast.jSerialComm.SerialPort

Gets the operating system-defined device name corresponding to this serial port.

getWriteTimeout() - Method in class com.fazecast.jSerialComm.SerialPort

Gets the number of milliseconds of inactivity to tolerate before returning from a SerialPort.writeBytes(byte[],long) call.

I

isOpen() - Method in class com.fazecast.jSerialComm.SerialPort

Returns whether the port is currently open and available for communication.

L

LISTENING_EVENT_DATA_AVAILABLE - Static variable in class com.fazecast.jSerialComm.SerialPort

LISTENING_EVENT_DATA_RECEIVED - Static variable in class com.fazecast.jSerialComm.SerialPort

LISTENING_EVENT_DATA_WRITTEN - Static variable in class com.fazecast.jSerialComm.SerialPort

M

MARK_PARITY - Static variable in class com.fazecast.jSerialComm.SerialPort

N

NO_PARITY - Static variable in class com.fazecast.jSerialComm.SerialPort

O

ODD_PARITY - Static variable in class com.fazecast.jSerialComm.SerialPort

ONE_POINT_FIVE_STOP_BITS - Static variable in class com.fazecast.jSerialComm.SerialPort

ONE_STOP_BIT - Static variable in class com.fazecast.jSerialComm.SerialPort

openPort() - Method in class com.fazecast.jSerialComm.SerialPort

Opens this serial port for reading and writing.

openPort(int) - Method in class com.fazecast.jSerialComm.SerialPort

Opens this serial port for reading and writing with an optional delay time.

R

readBytes(byte[], long) - Method in class com.fazecast.jSerialComm.SerialPort

Reads up to bytesToRead raw data bytes from the serial port and stores them in the buffer.

removeDataListener() - Method in class com.fazecast.jSerialComm.SerialPort

Removes the associated SerialPortDataListener from the serial port interface.

S

serialEvent(SerialPortEvent) - Method in interface com.fazecast.jSerialComm.SerialPortDataListener

Called whenever one of the serial port events specified by the SerialPortDataListener.getListeningEvents() method occurs.

SerialPort - Class in com.fazecast.jSerialComm

This class provides native access to serial ports and devices without requiring external libraries or tools.

SerialPortDataListener - Interface in com.fazecast.jSerialComm

This interface must be implemented to enable simple event-based serial port I/O.

SerialPortEvent - Class in com.fazecast.jSerialComm

This class describes an asynchronous serial port event.

SerialPortEvent(SerialPort, int) - Constructor for class com.fazecast.jSerialComm.SerialPortEvent

Constructs a SerialPortEvent object corresponding to the specified serial event type.

SerialPortEvent(SerialPort, int, byte[]) - Constructor for class com.fazecast.jSerialComm.SerialPortEvent

Constructs a SerialPortEvent object corresponding to the specified serial event type and containing the passed-in data bytes.

SerialPortPacketListener - Interface in com.fazecast.jSerialComm

This interface must be implemented to enable full packet reads using event-based serial port I/O.

setBaudRate(int) - Method in class com.fazecast.jSerialComm.SerialPort

Sets the desired baud rate for this serial port.

setBreak() - Method in class com.fazecast.jSerialComm.SerialPort

Sets the BREAK signal on the serial control line.

setComPortParameters(int, int, int, int) - Method in class com.fazecast.jSerialComm.SerialPort

Sets all serial port parameters at one time.

setComPortTimeouts(int, int, int) - Method in class com.fazecast.jSerialComm.SerialPort

Sets the serial port read and write timeout parameters.

setDTR() - Method in class com.fazecast.jSerialComm.SerialPort

Sets the state of the DTR line to 1.

setFlowControl(int) - Method in class com.fazecast.jSerialComm.SerialPort

Specifies what kind of flow control to enable for this serial port.

setNumDataBits(int) - Method in class com.fazecast.jSerialComm.SerialPort

Sets the desired number of data bits per word.

setNumStopBits(int) - Method in class com.fazecast.jSerialComm.SerialPort

Sets the desired number of stop bits per word.

setParity(int) - Method in class com.fazecast.jSerialComm.SerialPort

Sets the desired parity error-detection scheme to be used.

setRTS() - Method in class com.fazecast.jSerialComm.SerialPort

Sets the state of the RTS line to 1.

SPACE_PARITY - Static variable in class com.fazecast.jSerialComm.SerialPort

T

TIMEOUT_NONBLOCKING - Static variable in class com.fazecast.jSerialComm.SerialPort

TIMEOUT_READ_BLOCKING - Static variable in class com.fazecast.jSerialComm.SerialPort

TIMEOUT_READ_SEMI_BLOCKING - Static variable in class com.fazecast.jSerialComm.SerialPort

TIMEOUT_SCANNER - Static variable in class com.fazecast.jSerialComm.SerialPort

TIMEOUT_WRITE_BLOCKING - Static variable in class com.fazecast.jSerialComm.SerialPort

TIMEOUT_WRITE_SEMI_BLOCKING - Static variable in class com.fazecast.jSerialComm.SerialPort

TWO_STOP_BITS - Static variable in class com.fazecast.jSerialComm.SerialPort

W

writeBytes(byte[], long) - Method in class com.fazecast.jSerialComm.SerialPort

Writes up to bytesToWrite raw data bytes from the buffer parameter to the serial port.

A B C E F G I L M N O R S T W