* add
* remove old
* remove more old
* makefile
* fix init
* patch up other stuff
* actually fix it this time
* raw output channels
* gauges, UI
* scaled channel
* fix field ordering
* remove old impl
* add cpp wrapper to os_access
* clean up os_access
* remove touchTimeCounter
* new impl
* put comment about lock free impl
* include cpp wrappers for BL
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* Add SW knock control to MRE on AT4
* Update software_knock.cpp
cleanup
* use knock only for final build
* adjust RAM
* Update engine_controller.cpp
Adjust RAM for HW QC special to build
* change acSwitch name, add mode
* fix
* remove some adc stuff
* remove some adc stuff
* semicolon stupid
* left behind
* add readpinstate
* wrong var name
* add functions back
* fix name
* bool, not void, plus fix name
* move
* not sure what I broke
* try setMockValue
* namespace
* whoops missed one
* switch values because adc was set up for pullup
* try 5
* comment for now
* comment for now
* uncomment tests, add function to mock, add mock to efiReadPin
* fixes
* for F's sake
* if
* add defy
* pass params
* use ASSERT_TRUE/FALSE
* advance time
* remove ifdef from readPin
* try moving if
* move to separate func
* move extern
* move include
* try engine_test_helper
* am confuse
* move func to else
* include hal
* add efi prod check
* remove include
* try extern
* move include
* semicolon stupid
* move extern again
* include
* move mockPinStates
* size
* add if
* add comment
* clean on instantiation
* ADC: move DMA buffer outside of AdcDevice (save few bytes)
* ADC: inlcude fast channels to debug output
* ADC: save some CPU ticks (disabled until fully tested)
* ADC: simplify
* lambda sens
* fix init
* fix
* a test for good measure
* he's climbin in your windows, snatchin you ram up
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* Add date workflow
* add files
* use VCS_DATE in engine controller
* initial values
* switched to using one file
* moved to controllers
* Add comment and fix cron entry
* add pragma once
* Add more comments
* hard pwm
* fix, comments
* PC6-9 and PD12-15
* PB6-9
* dynamic frequency
* f7 mcuconf
* format
* relocate to common, support variable frequency
* error handling
* oops
* fix test build
* noop kinetis
* better guards
* guard for bl
* guards don't work if they have typos
* more mapping
* oops
* don't use for slow pwm
* enable pwm
* guard properly
* save a little memory
* use less mem
* correct timers
* all your ram are belong to us
* update limit & comment
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* binary log
* remove old text logging
* change file extension
* just use a bare buffer
* more mem :(
* double ugh
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* add redundant sensor
* add tests
* add configure, info printing
* tests
* tests
* partial hookup
* fix
* fix
* bad makefile merge
* use second TPS config
* update test
* update test
* sensor names
* set second pin by default
* fix auto cal
* auto cal both sensors
* add reconfigure of secondary sensors
* gobblin' up your ram
* slow down write a little bit
* put split in debug gauge
* s
Co-authored-by: Matthew Kennedy <matthew@mck-mbp-15.local>
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* field support
* tests
* makefiles
* test data too
* missing include dir
* write correct thing
* fix one test
* fix test
* omnomnomnom ram
* format
* use defined names
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* update dc motor api
* add more etbio
* get out of two arrays
* hand generate enough
* forgot engine param
* ram
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* add tid field to thread
* change perf trace format
* trace consumers
* Update java parsing
* guard for test + kinetis
* stubs
* ram
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* switch to thread
* actually use default frequency define
* crank ADC too
* make space in RAM
* remove TS field
* this should work for test
* fix dt
* re-resize ram
Linking build/rusefi.elf
/home/runner/work/rusefi/rusefi/gcc-arm-none-eabi-9-2019-q4-major/bin/../lib/gcc/arm-none-eabi/9.2.1/../../../../arm-none-eabi/bin/ld: build/rusefi.elf section `.ram4' will not fit in region `ram4'
/home/runner/work/rusefi/rusefi/gcc-arm-none-eabi-9-2019-q4-major/bin/../lib/gcc/arm-none-eabi/9.2.1/../../../../arm-none-eabi/bin/ld: region `ram4' overflowed by 352 bytes
collect2: error: ld returned 1 exit status
* config & hand gen
* board configs
* add dc motor support
* initialization
* also set duty to zero
* use disable in etb
* fix proteus default
* add TS fields
* I guess we needed 8 bytes
* :D
* comment
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* hook up clt
* init test
* probably fix test
* aux temp
* relax checking
* more significant figures
* remove old aux temp
* hand generate
* claim RAM
* move to ccm
* subscribe
* info printing
* warnings
* raise high voltage failure threshold
* fix test
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
rusefillc
Matthew Kennedy
rusefi
shadowm60
David Holdeman
Andrey G
David Holdeman
rusEfi