rusefi/firmware/config/boards/hellen/hellenMiataNB1/board_configuration.cpp

/**
 * @file boards/hellen/hellen-nb1/board_configuration.cpp
 *
 *
 * @brief Configuration defaults for the hellen-nb1 board
 *
 * See http://rusefi.com/s/hellenNB1
 *
 * @author andreika <prometheus.pcb@gmail.com>
 * @author Andrey Belomutskiy, (c) 2012-2020
 */

#include "pch.h"
#include "hellen_meta.h"

static void setInjectorPins() {
	engineConfiguration->injectionPins[0] = Gpio::H144_LS_1;
	engineConfiguration->injectionPins[1] = Gpio::H144_LS_2;
	engineConfiguration->injectionPins[2] = Gpio::H144_LS_3;
	engineConfiguration->injectionPins[3] = Gpio::H144_LS_4;

	engineConfiguration->clutchDownPin = Gpio::C4; // Clutch switch input
	engineConfiguration->clutchDownPinMode = PI_PULLDOWN;
	engineConfiguration->launchActivationMode = CLUTCH_INPUT_LAUNCH;
	engineConfiguration->malfunctionIndicatorPin = Gpio::H144_OUT_IO8;
}

static void setIgnitionPins() {
	engineConfiguration->ignitionPins[0] = Gpio::H144_IGN_1;
	engineConfiguration->ignitionPins[1] = Gpio::Unassigned;
	engineConfiguration->ignitionPins[2] = Gpio::H144_IGN_2;
	engineConfiguration->ignitionPins[3] = Gpio::Unassigned;
}

static void setupDefaultSensorInputs() {
	// trigger inputs, hall
	engineConfiguration->triggerInputPins[0] = Gpio::H144_IN_CRANK;
	engineConfiguration->triggerInputPins[1] = Gpio::Unassigned;
	engineConfiguration->camInputs[0] = Gpio::H144_IN_CAM;

	engineConfiguration->tps1_1AdcChannel = H144_IN_TPS;

	engineConfiguration->mafAdcChannel = EFI_ADC_10;
	engineConfiguration->map.sensor.hwChannel = EFI_ADC_11;

	engineConfiguration->afr.hwChannel = EFI_ADC_1;

	engineConfiguration->clt.adcChannel = H144_IN_CLT;

	engineConfiguration->iat.adcChannel = H144_IN_IAT;
}



void setBoardConfigOverrides() {
	setHellenVbatt();

	setHellenSdCardSpi2();

    setDefaultHellenAtPullUps();

	setHellenCan();
}

/**
 * @brief   Board-specific configuration defaults.
 *
 * See also setDefaultEngineConfiguration
 *

 */
void setBoardDefaultConfiguration() {
	setInjectorPins();
	setIgnitionPins();

	engineConfiguration->enableSoftwareKnock = true;

	engineConfiguration->boostControlPin = Gpio::H144_LS_6;
	engineConfiguration->acSwitch = Gpio::H144_IN_D_AUX3;
	engineConfiguration->acRelayPin = Gpio::H144_OUT_IO6;
	engineConfiguration->fuelPumpPin = Gpio::G2;	// OUT_IO9
	engineConfiguration->idle.solenoidPin = Gpio::D14;	// OUT_PWM5
	engineConfiguration->fanPin = Gpio::D12;	// OUT_PWM8
	engineConfiguration->mainRelayPin = Gpio::I2;	// OUT_LOW3
    engineConfiguration->tachOutputPin = Gpio::H144_OUT_PWM1;
	engineConfiguration->alternatorControlPin = Gpio::H144_OUT_PWM7;
	engineConfiguration->fan2Pin = Gpio::H144_OUT_IO2;

	// "required" hardware is done - set some reasonable defaults
	setupDefaultSensorInputs();

	engineConfiguration->cylindersCount = 4;
	engineConfiguration->firingOrder = FO_1_3_4_2;

	engineConfiguration->ignitionMode = IM_INDIVIDUAL_COILS; // IM_WASTED_SPARK



	engineConfiguration->clutchDownPin = Gpio::H144_IN_D_2;
	engineConfiguration->clutchDownPinMode = PI_PULLDOWN;
	engineConfiguration->launchActivationMode = CLUTCH_INPUT_LAUNCH;
// ?	engineConfiguration->malfunctionIndicatorPin = Gpio::G4; //1E - Check Engine Light
}