2020-05-01 11:58:18 -07:00
# [rusEFI project](rusEFI-project)
2020-05-01 11:55:45 -07:00
## Fuel
2020-05-01 12:25:48 -07:00
[Injection settings ](#injection-settings )
2020-05-01 11:48:17 -07:00
2020-05-01 12:25:48 -07:00
[Injector dead time ](#injector-dead-time )
2020-05-01 11:48:17 -07:00
2020-05-01 12:25:48 -07:00
[Fuel short-term closed-loop correction ](#fuel-short-term-closed-loop-correction )
2020-05-01 11:48:17 -07:00
2020-05-01 12:25:48 -07:00
[Coasting Fuel Cutoff Settings ](#coasting-fuel-cutoff-settings )
2020-05-01 11:48:17 -07:00
2020-05-01 12:25:48 -07:00
[Fuel Table ](#fuel-table )
2020-05-01 11:48:17 -07:00
2020-05-01 12:25:48 -07:00
[Injection Phase ](#injection-phase )
2020-05-01 11:48:17 -07:00
2020-05-01 12:25:48 -07:00
[Warmup fuel manual Multiplier ](#warmup-fuel-manual-multiplier )
2020-05-01 11:48:17 -07:00
2020-05-01 12:25:48 -07:00
[Intake air temperature fuel Multiplier ](#intake-air-temperature-fuel-multiplier )
2020-05-01 11:48:17 -07:00
2020-05-01 12:25:48 -07:00
[tCharge Settings ](#tcharge-settings )
2020-05-01 11:48:17 -07:00
2020-05-01 12:25:48 -07:00
[Accel/Decel Enrichment ](#accel/decel-enrichment )
2020-05-01 11:48:17 -07:00
2020-05-01 12:25:48 -07:00
[TPS/TPS Acceleration Extra Fuel(ms) ](#tps/tps-acceleration-extra-fuel(ms ))
2020-05-01 11:48:17 -07:00
2020-05-01 12:25:48 -07:00
[Engine Load Acceleration Enrichment Taper ](#engine-load-acceleration-enrichment-taper )
2020-05-01 11:48:17 -07:00
2020-05-01 11:55:45 -07:00
### Injection settings
2020-05-01 11:49:31 -07:00
![x ](overview/TS_generated/dialog_Injection_settings.png )
2020-05-01 11:48:17 -07:00
2020-05-01 11:55:45 -07:00
Two wire batch emulation: This is needed if your coils are individually wired and you wish to use batch injection.
enable two_wire_batch_injection
2020-05-01 11:48:17 -07:00
2020-05-01 11:55:45 -07:00
Two wire batch emulation: This is needed if your coils are individually wired and you wish to use batch injection.
enable two_wire_batch_injection
2020-05-01 11:48:17 -07:00
2020-05-01 11:55:45 -07:00
Two wire batch emulation: This is needed if your coils are individually wired and you wish to use batch injection.
enable two_wire_batch_injection
### Injector dead time
2020-05-01 11:49:31 -07:00
![x ](overview/TS_generated/dialog_Injector_dead_time.png )
2020-05-01 11:55:45 -07:00
### Fuel short-term closed-loop correction
2020-05-01 11:49:31 -07:00
![x ](overview/TS_generated/dialog_Fuel_short-term_closed-loop_correction.png )
2020-05-01 11:55:45 -07:00
### Coasting Fuel Cutoff Settings
2020-05-01 11:49:31 -07:00
![x ](overview/TS_generated/dialog_Coasting_Fuel_Cutoff_Settings.png )
2020-05-01 11:55:45 -07:00
2020-05-01 11:48:17 -07:00
Enable Coasting Fuel Cutoff: This setting disables fuel injection while the engine is in overrun, this is useful as a fuel saving measure and to prevent back firing.
TPS Deactivation Threshold(%): percent between 0 and 100 below which the fuel cut is deactivated, this helps low speed drivability.
2020-05-01 11:55:45 -07:00
### Fuel Table
2020-05-01 11:49:31 -07:00
![x ](overview/TS_generated/dialog_Fuel_Table.png )
2020-05-01 11:55:45 -07:00
### Injection Phase
2020-05-01 11:49:31 -07:00
![x ](overview/TS_generated/dialog_Injection_Phase.png )
2020-05-01 11:55:45 -07:00
### Warmup fuel manual Multiplier
2020-05-01 11:49:31 -07:00
![x ](overview/TS_generated/dialog_Warmup_fuel_manual_Multiplier.png )
2020-05-01 11:55:45 -07:00
### Intake air temperature fuel Multiplier
2020-05-01 11:49:31 -07:00
![x ](overview/TS_generated/dialog_Intake_air_temperature_fuel_Multiplier.png )
2020-05-01 11:55:45 -07:00
### tCharge Settings
2020-05-01 11:49:31 -07:00
![x ](overview/TS_generated/dialog_tCharge_Settings.png )
2020-05-01 11:55:45 -07:00
### Accel/Decel Enrichment
2020-05-01 11:49:31 -07:00
![x ](overview/TS_generated/dialog_Accel_Decel_Enrichment.png )
2020-05-01 11:55:45 -07:00
### TPS/TPS Acceleration Extra Fuel(ms)
2020-05-01 11:49:31 -07:00
![x ](overview/TS_generated/dialog_TPS_TPS_Acceleration_Extra_Fuelms.png )
2020-05-01 11:55:45 -07:00
### Engine Load Acceleration Enrichment Taper
2020-05-01 11:49:31 -07:00
![x ](overview/TS_generated/dialog_Engine_Load_Acceleration_Enrichment_Taper.png )
2020-05-01 11:48:17 -07:00
2020-05-01 11:55:45 -07:00
2020-05-01 12:25:48 -07:00
generated by class com.rusefi.MdGenerator on Fri May 01 15:24:28 EDT 2020