rusefi_documentation/Plug-In-Board-Process.md

[HOWTO-Make-a-PnP-board](HOWTO-Make-a-PnP-board)

# Plug In Board Process

## Step 1 Research

have wiring diagrams in random loose format: pictures, scans, PDF, text.

## Step 2 Data Entry

have ECU connector pin-out in google spreadsheet form, with explicit function of each pin, often with analysis of multiple vehicles with similar pin-out. [Good example](https://docs.google.com/spreadsheets/d/1H0cZPAJFbpprgSu1Y8BiAYzXbqddvIn-Hhod4QCVQwk)

## Step 3 Breakout

Breakout board for that connector to reduce risks, also a product by itself!

## Step 4 Start of KiCAD

Pin-out data entry into KiCAD

## Step 5 Adapter

Proteus or else adapter for specific vehicle, based on steps 2, 3 and 4. Because cheaper fabrication and less labor intense.

## Step 6 Plug In Hellen

Full plug in board like Hellen if demand exists. See <https://github.com/rusefi/rusefi/wiki/Standalone-on-Demand>

## Step 7 Hellen real vehicle tests

We are getting good at these Hellen boards but a board is not done until tested on a real vehicle. A master tech skill set is needed to turn a Hellen into a proven board!