rusefi_documentation/rusEFI-project-Cranking.md

# [rusEFI project](rusEFI-project)
## Cranking
[Cranking Settings](#cranking-settings)

[Cranking Coolant Temperature Multiplier](#cranking-coolant-temperature-multiplier)

[Cranking Duration Multiplier](#cranking-duration-multiplier)

[Cranking TPS Multiplier](#cranking-tps-multiplier)

### Cranking Settings
![x](overview/TS_generated/dialog_Cranking_Settings.png)

Enable cylinder cleanup: When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders.

Enable faster engine spin-up: Smarter cranking logic.
See also startOfCrankingPrimingPulse

Use separate Advance Table for cranking: This activates a separate advance table for cranking conditions, this allows cranking advance to be RPM dependant.

Use Advance Corrections for cranking: This enables the various ignition corrections during cranking (IAT, CLT, FSIO and PID idle).

Use fixed cranking dwell: If set to true, will use the specified duration for cranking dwell. If set to false, will use the specified dwell angle. Unless you have a really good reason to, leave this set to true to use duration mode.

Use separate Advance Table for cranking: This activates a separate advance table for cranking conditions, this allows cranking advance to be RPM dependant.

Use Advance Corrections for cranking: This enables the various ignition corrections during cranking (IAT, CLT, FSIO and PID idle).

Use fixed cranking dwell: If set to true, will use the specified duration for cranking dwell. If set to false, will use the specified dwell angle. Unless you have a really good reason to, leave this set to true to use duration mode.

Use separate Advance Table for cranking: This activates a separate advance table for cranking conditions, this allows cranking advance to be RPM dependant.

Use Advance Corrections for cranking: This enables the various ignition corrections during cranking (IAT, CLT, FSIO and PID idle).

Use fixed cranking dwell: If set to true, will use the specified duration for cranking dwell. If set to false, will use the specified dwell angle. Unless you have a really good reason to, leave this set to true to use duration mode.

### Cranking Coolant Temperature Multiplier
![x](overview/TS_generated/dialog_Cranking_Coolant_Temperature_Multiplier.png)

### Cranking Duration Multiplier
![x](overview/TS_generated/dialog_Cranking_Duration_Multiplier.png)

### Cranking TPS Multiplier
![x](overview/TS_generated/dialog_Cranking_TPS_Multiplier.png)


generated by class com.rusefi.MdGenerator on Fri May 01 15:24:28 EDT 2020
cool stuff 2020-05-01 11:58:18 -07:00			`# [rusEFI project](rusEFI-project)`
cool stuff 2020-05-01 11:55:45 -07:00			`## Cranking`
cool stuff 2020-05-01 12:25:48 -07:00			`[Cranking Settings](#cranking-settings)`
cool stuff 2020-05-01 11:48:17 -07:00
cool stuff 2020-05-01 12:25:48 -07:00			`[Cranking Coolant Temperature Multiplier](#cranking-coolant-temperature-multiplier)`
cool stuff 2020-05-01 11:48:17 -07:00
cool stuff 2020-05-01 12:25:48 -07:00			`[Cranking Duration Multiplier](#cranking-duration-multiplier)`
cool stuff 2020-05-01 11:48:17 -07:00
cool stuff 2020-05-01 12:25:48 -07:00			`[Cranking TPS Multiplier](#cranking-tps-multiplier)`
cool stuff 2020-05-01 11:48:17 -07:00
cool stuff 2020-05-01 11:55:45 -07:00			`### Cranking Settings`
cool stuff 2020-05-01 11:49:31 -07:00			`![x](overview/TS_generated/dialog_Cranking_Settings.png)`
cool stuff 2020-05-01 11:55:45 -07:00
cool stuff 2020-05-01 11:48:17 -07:00			`Enable cylinder cleanup: When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders.`

cool stuff 2020-05-01 11:55:45 -07:00			`Enable faster engine spin-up: Smarter cranking logic.`
			`See also startOfCrankingPrimingPulse`
cool stuff 2020-05-01 11:48:17 -07:00
			`Use separate Advance Table for cranking: This activates a separate advance table for cranking conditions, this allows cranking advance to be RPM dependant.`

			`Use Advance Corrections for cranking: This enables the various ignition corrections during cranking (IAT, CLT, FSIO and PID idle).`

			`Use fixed cranking dwell: If set to true, will use the specified duration for cranking dwell. If set to false, will use the specified dwell angle. Unless you have a really good reason to, leave this set to true to use duration mode.`

			`Use separate Advance Table for cranking: This activates a separate advance table for cranking conditions, this allows cranking advance to be RPM dependant.`

			`Use Advance Corrections for cranking: This enables the various ignition corrections during cranking (IAT, CLT, FSIO and PID idle).`

			`Use fixed cranking dwell: If set to true, will use the specified duration for cranking dwell. If set to false, will use the specified dwell angle. Unless you have a really good reason to, leave this set to true to use duration mode.`

			`Use separate Advance Table for cranking: This activates a separate advance table for cranking conditions, this allows cranking advance to be RPM dependant.`

			`Use Advance Corrections for cranking: This enables the various ignition corrections during cranking (IAT, CLT, FSIO and PID idle).`

			`Use fixed cranking dwell: If set to true, will use the specified duration for cranking dwell. If set to false, will use the specified dwell angle. Unless you have a really good reason to, leave this set to true to use duration mode.`

cool stuff 2020-05-01 11:55:45 -07:00			`### Cranking Coolant Temperature Multiplier`
cool stuff 2020-05-01 11:49:31 -07:00			`![x](overview/TS_generated/dialog_Cranking_Coolant_Temperature_Multiplier.png)`
cool stuff 2020-05-01 11:55:45 -07:00
			`### Cranking Duration Multiplier`
cool stuff 2020-05-01 11:49:31 -07:00			`![x](overview/TS_generated/dialog_Cranking_Duration_Multiplier.png)`
cool stuff 2020-05-01 11:55:45 -07:00
			`### Cranking TPS Multiplier`
cool stuff 2020-05-01 11:49:31 -07:00			`![x](overview/TS_generated/dialog_Cranking_TPS_Multiplier.png)`
cool stuff 2020-05-01 11:48:17 -07:00
cool stuff 2020-05-01 11:55:45 -07:00
cool stuff 2020-05-01 12:25:48 -07:00			`generated by class com.rusefi.MdGenerator on Fri May 01 15:24:28 EDT 2020`