2020-09-05 21:03:36 -07:00
See also [HOWTO-Crimp-Ampseal ](HOWTO-Crimp-Ampseal )
2020-10-09 12:01:56 -07:00
See also [Vault-Of-Electronic-Throttle-Bodies-ETB ](Vault-Of-Electronic-Throttle-Bodies-ETB ) Nissan Hitachi SERA576-01 60mm throttle body recommended.
2020-10-09 12:01:14 -07:00
2020-08-28 06:02:28 -07:00
[M73 wiring diagram ](BMW-e38-750 )
2020-08-17 04:20:03 -07:00
2020-10-18 14:08:36 -07:00
~6 wires are different between [Proteus 0.2 ](https://github.com/rusefi/rusefi/wiki/Hardware-Proteus-Wiring-v02 ) and [Proteus 0.3 ](https://github.com/rusefi/rusefi/wiki/Hardware-Proteus-Wiring-v03 ) - all on the 23 pin plug.
2020-08-17 04:20:03 -07:00
2020-08-17 04:25:15 -07:00
2020-08-17 04:31:12 -07:00
This HOWTO is focusing on M73 engine with stock ECU harness. 1998 stock ECU harness has two 134 pin connectors.
On my 1998 first set of 9+24+52+40+9=134 pins total is BLACK.
Second set of 9+24+52+40+9=134 pins total is GREY.
2020-08-17 04:25:15 -07:00
2020-08-17 04:33:35 -07:00
rusEFI uses six wire colors: black white red orange green blue.
2020-08-17 20:14:48 -07:00
# Proteus
* +12 from main relay
* x12 injectors
* CLT
* IAT
2020-08-17 20:29:01 -07:00
Destination legend:
"Black #3 40/52" means "Black set of ECU plugs, connector #3 - pin 40 of 52 total pins"
2020-10-18 18:05:28 -07:00
Wire length:
ETB/Pedal: 7ft/213cm
2020-11-26 16:47:20 -08:00
ECU/OEM pigtails: 52 inches / 132cm
2020-08-17 20:14:48 -07:00
## Black 35 Pin 776231-1
|Pin Number|Name | Type ID | Default function | rusEFI color | Destination |
| ---:|:------------- | ----- |:------------------------------------ |--------- | --- |
2020-08-17 20:19:19 -07:00
| 3 |**Lowside #1 ** | ls | Injector #1 | Blue | Black #3 41/52 BRN/WHT |
2020-08-17 20:23:53 -07:00
| 4 |**Lowside #3 ** | ls | Injector #3 | Green | Black #3 40/52 |
2020-08-17 20:27:51 -07:00
| 5 |**Lowside #5 ** | ls | Injector #5 | Red | Black #3 28/52 |
2020-08-17 20:23:53 -07:00
| 6 |**Lowside #6 ** | ls | Injector #6 | Orange | Black #3 27/52 BRN/BLK |
2020-08-17 20:19:19 -07:00
| 7 |**Lowside #7 ** | ls | Injector #7 | Blue | Grey #3 41/52 BRN/WHT |
2020-08-17 20:27:51 -07:00
| 8 |**Lowside #9 ** | ls | Injector #9 | Green| Grey #3 40/52 |
| 9 |**Lowside #11 **| ls | Injector #11 | Red |Grey #3 28/52 |
2020-08-17 20:14:48 -07:00
| 10 |**Lowside #13 **| ls | low-side output: main relay | Blue | Black plug #2 23/24 BRN/BLK |
2020-08-19 09:02:44 -07:00
| 11 |**Lowside #14 **| ls | low-side output: starter enable | White | Black plug #4 40/40 YEL/BRN |
2020-11-06 07:30:02 -08:00
| 12 |**Lowside #15 **| ls | low-side output: radiator fan relay | green | accessory |
2020-08-17 20:19:19 -07:00
| 15 |**Lowside #2 ** | ls | Injector #2 | Black | Black #3 15/52 |
2020-08-17 20:23:53 -07:00
| 16 |**Lowside #4 ** | ls | Injector #4 | White | Black #3 2/52 |
2020-08-17 20:27:51 -07:00
| 17 | **GND** | y | Power GND | Black | Grey #1 4/9 |
| 18 | **GND** | y | Power GND | Black | Black #1 4/9 |
| 19 |**Lowside #8 ** | y | Injector #8 | Black | Grey #3 15/52 |
| 20 |**Lowside #10 **| y | Injector #10 | White| Grey #3 2/52 |
| 21 |**Lowside #12 **| y | Injector #12 | Orange | Grey #3 27/52 BRN/BLK |
2020-11-06 07:30:02 -08:00
| 23 |**Lowside #16 **| y | low-side output: fuel pump | Orange | accessory |
2020-08-17 20:27:51 -07:00
| 24 | **GND** | y | Power GND | Black | Grey plug #1 6/9 BRN |
2020-08-22 16:50:25 -07:00
| 30 | Ignition 7 | y | Ignition cylinder 7 | White | - | External Igniter channel #2 |
| 35 | Ignition 1 | y | Ignition cylinder 1 | Orange | - | External Igniter channel #1 |
2020-08-17 20:14:48 -07:00
2020-11-05 17:36:05 -08:00
## Black 23 Pin 776228-1 on Black Proteus 0.2
2020-08-17 20:14:48 -07:00
|Pin Number|Name | Type ID | Default function |rusEFI color | OEM connector |
| ---:|:---------- | ----- |:------------------------------------ | :--------- | --- |
2020-08-19 09:02:44 -07:00
| 1 | DIGITAL 2 | din | Camshaft position sensor | Red | Black plug #3 20/52 |
2020-11-05 17:36:05 -08:00
| 2 | DIGITAL 3 | din | Start signal from ignition key | Orange | |
2020-08-17 20:32:03 -07:00
| 5 | VR1 pos | vr | Variable Reluctance #1 positive | Orange | Black #3 32/52 |
2020-08-21 11:34:18 -07:00
| 8 | ETB1- | y | ETB 1 negative | White |
2020-08-17 20:32:03 -07:00
| 13 | VR1 neg | vr | Variable Reluctance #1 negative | Blue | Black #3 46 /52 |
2020-08-21 11:34:18 -07:00
| 15 | ETB1+ | etb | ETB 1 positive | Blue |
2020-08-17 20:14:48 -07:00
| 18 | +12 raw | 12v | ignition power / ECU power source | Red | Black plug #4 26/40 GRN/BLK |
| 19 | **GND** | y | Power GND | Black | Black plug #1 6/9 BRN |
2020-08-19 09:02:44 -07:00
| 21 | ETB2- | etb | ETB 2 negative | White |
| 22 | ETB2+ | etb | ETB 2 positive | Blue |
2020-08-21 11:34:18 -07:00
| 23 | +12V mr | 12v | ETB/high-side power supply from main relay | Red | Black #1 8/9 RED/BLU |
2020-11-05 17:48:31 -08:00
End of Black Proteus 0.2 23 pin table
2020-08-21 11:34:18 -07:00
2020-11-05 17:36:05 -08:00
## Black 23 Pin 776228-1 on Green Proteus 0.3+
|Pin Number|Name | Type ID | Default function |rusEFI color | OEM connector |
| ---:|:---------- | ----- |:------------------------------------ | :--------- | --- |
| 1 | DIGITAL 2 | din | Camshaft position sensor | Red | Black plug #3 20/52 |
| 2 | DIGITAL 3 | din | Start signal from ignition key | Orange | |
| 5 | VR1 pos | vr | Variable Reluctance #1 positive | Orange | Black #3 32/52 |
| 6 | ETB1- | y | ETB 1 negative | White |
| 7 | ETB1+ | etb | ETB 1 positive | Blue |
| 8 | ETB2- | etb | ETB 2 negative | White |
| 13 | VR1 neg | vr | Variable Reluctance #1 negative | Blue | Black #3 46 /52 |
| 15 | ETB2+ | etb | ETB 2 positive | Blue |
2020-11-06 07:30:02 -08:00
| 16 | CAN- | can | CAN bus low | White | accessory |
| 17 | CAN+ | can | CAN bus high | Red | accessory |
| 18 | +12 raw | 12v | ignition power / ECU power source | Red | Black plug #4 26/40 GRN/BLK |
2020-11-05 17:36:05 -08:00
| 19 | **GND** | y | Power GND | Black | Black plug #1 6/9 BRN |
| 23 | +12V mr | 12v | ETB/high-side power supply from main relay | Red | Black #1 8/9 RED/BLU |
2020-11-05 17:48:31 -08:00
End of Green Proteus 0.3+ 23 pin table
2020-08-19 09:02:44 -07:00
2020-08-17 20:23:53 -07:00
## White 35 Pin 776231-2
2020-08-19 09:02:44 -07:00
|Pin Number|Name | Type ID | Default function |rusEFI color | OEM connector | . |
| ---:|:---------- | ----- |:------------------------------------ | :--------- | --- | --- |
2020-08-21 11:34:18 -07:00
| 1 | **GND** | sgnd | Sensor GND | Black | Black #3 21/52 BRN|
2020-08-21 16:22:50 -07:00
| 2 | **GND** | sgnd | Sensor GND | Black | - | ETB #1 sensor GND |
| 3 | **GND** | sgnd | Sensor GND | Black | - | ETB #2 sensor GND |
2020-08-21 11:34:18 -07:00
| 4 | **GND** | sgnd | Sensor GND | Black | Grey #3 47/52 BRN |
2020-11-06 07:30:02 -08:00
| 5 | **GND** | sgnd | Sensor GND | Black | - | Throttle Pedal GND #1 |
| 6 | **GND** | sgnd | Sensor GND | Blue | - | Throttle Pedal GND #2 |
2020-11-07 11:28:53 -08:00
| 7 | **GND** | sgnd | Sensor GND | Black | - | Accessory / MAP gnd |
2020-08-21 13:55:09 -07:00
| 9 | 5V SENS 1 | 5v | Analog Voltage +5 supply #1 | Red | - | ETB #1 sensor feed |
2020-11-07 11:28:53 -08:00
| 10 | 5V SENS 2 | 5v | Analog Voltage +5 supply #2 | Red | - | Throttle Pedal feed #1 |
2020-10-18 17:53:40 -07:00
| 13 | AV1 | av | Analog Voltage Input #1 | |
2020-08-22 05:15:09 -07:00
| 14 | AV3 | av | Analog Voltage Input #3 | Orange | - | TPS1 Secondary signal |
2020-11-07 11:28:53 -08:00
| 15 | AV5 | av | Analog Voltage Input #5 | Orange | - | TPS2 Secondary signal |
2020-08-21 16:22:50 -07:00
| 16 | AV7 | av | Analog Voltage Input #7 | White | - | Pedal Sensor #2 signal |
2020-10-18 17:53:40 -07:00
| 17 | AV9 | av | Analog Voltage Input #9 | |
2020-10-18 18:05:28 -07:00
| 18 | AV11 | av | Analog Voltage Input #11 | |
2020-11-07 11:28:53 -08:00
| 21 | 5V SENS 1 | 5v | Analog Voltage +5 supply #1 | Orange | - | Throttle Pedal feed #2 |
| 22 | 5V SENS 2 | 5v | Analog Voltage +5 supply #2 | Red | - | Accessory / MAP feed |
2020-08-22 05:15:09 -07:00
| 24 | AV2 | av | Analog Voltage Input #2 | Green | - | TPS1 Primary signal |
| 25 | AV4 | av | Analog Voltage Input #4 | Green | - | TPS2 Primary signal |
2020-08-21 16:22:50 -07:00
| 26 | AV6 | av | Analog Voltage Input #6 | Green | - | Pedal Sensor #1 signal|
2020-11-06 07:30:02 -08:00
| 27 | AV8 | av | Analog Voltage Input #8 | Blue | MAP/MAF accessory |
| 28 | AV10 | av | Analog Voltage Input #10 | Green | AFR/WBO accessory |
2020-10-18 18:05:28 -07:00
| 29 | AV12 | av | Analog Voltage Input #12 | |
2020-08-21 11:34:18 -07:00
| 30 | AT2 | at | Intake air temperature IAT | Orange | Grey #3 34/52 |
| 31 | AT4 | at | Coolant temperature CLT | Green | Black #3 22/52 RED/BRN |
2020-08-21 16:22:50 -07:00
| 32 | 5V SENS 1 | 5v | Analog Voltage +5 supply #1 | Red | - | ETB #2 sensor feed |
2020-10-18 17:53:40 -07:00
| 33 | 5V SENS 2 | 5v | Analog Voltage +5 supply #2 | Red | - | |
2020-08-19 09:02:44 -07:00
2020-08-17 20:14:48 -07:00
2020-08-17 04:33:35 -07:00
# 9 pin plug #1
2020-08-19 09:02:44 -07:00
|Pin Number|Name | Type ID | Default function |rusEFI color | OEM connector |
| ---:|:---------- | ----- |:------------------------------------ | :--------- | --- |
| . | | | | |
2020-08-17 04:31:12 -07:00
| | | | | |
2020-08-17 04:33:35 -07:00
| | | | | |
# 24 pin plug #2
2020-08-17 04:33:52 -07:00
| Pin | type | OEM color | Description | rusEFI color |
|---|---|---|---|---|
| | | | | |
2020-08-17 04:33:35 -07:00
# 52 pin plug #3
2020-08-17 04:33:52 -07:00
| Pin | type | OEM color | Description | rusEFI color |
|---|---|---|---|---|
| | | | | |
2020-08-17 04:33:35 -07:00
# 40 pin plug #4
2020-08-17 04:33:52 -07:00
| Pin | type | OEM color | Description | rusEFI color |
|---|---|---|---|---|
2020-08-17 15:19:42 -07:00
| 6| IN | | start signal from ignition key |
| 17| OUT |BLK | engine speed output for gauge cluster
| 26| IN |GRN/BLK| RED +12v hot in start & run
| 40| OUT |YEL/BRN |BRN starter enable
2020-08-17 04:33:52 -07:00
| | | | | |
2020-08-17 04:33:35 -07:00
# 9 pin plug #5
2020-08-17 04:33:52 -07:00
| Pin | type | OEM color | Description | rusEFI color |
|---|---|---|---|---|
2020-11-07 11:38:20 -08:00
| 3 | OUT BLK | ORANGE | coil signal, low-side |
2020-11-07 11:28:53 -08:00
| 5 | GND BRN | GND | ground |
2020-11-07 11:38:20 -08:00
| 6 | OUT BLK | ORANGE | coil signal, low-side |
| 9 | OUT BLK | ORANGE | coil signal, low-side |
2020-08-17 04:33:52 -07:00
| | | | | |
2020-08-17 09:44:38 -07:00
2020-11-07 11:38:20 -08:00
Toyota coil output pin #10 GREEN goes to BLACK breakout
Toyota coil output pin #1 YELLOW goes to GREY breakout
Toyota GND pin #3 goes to both BLACK and GREY breakout #5 5/9
Toyota Battery pin #9 to both BLACK and GREY breakout #1 8/9
2020-08-17 09:44:38 -07:00
2020-11-07 11:28:53 -08:00
* Plug #5 9 pin
* ECU pin 3: OUT BLK RED coil signal, low-side
* ECU pin 5: GND BRN GND ground
* ECU pin 6: OUT BLK RED coil signal, low-side
* ECU pin 9: OUT BLK RED coil signal, low-side
2020-08-17 15:25:21 -07:00
2020-08-21 13:37:21 -07:00
See also https://github.com/rusefi/rusefi/wiki/Vault-Of-Electronic-Throttle-Bodies-ETB
2020-08-17 15:25:21 -07:00
2020-11-24 10:42:55 -08:00
Pictured Proteus with ampseal connectors, non-BMW pedal sensor, two non-BMW ETB connectors, igniter, two breakout boards for the stock connectors.
OEM pedal and ETBs are too unusual thus complete redesign of pedal and ETB hardware and wiring.
![x ](oem_docs/Bmw/1998_750_e38/proteus_0.2/Proteus_ready_for_M73.jpg )
2020-11-01 15:36:37 -08:00
![ecu1 ](oem_docs/Bmw/1998_750_e38/BMW-134.jpg )
![x ](oem_docs/Bmw/1998_750_e38/proteus_0.2/20201007_top_both.jpg )
![x ](oem_docs/Bmw/1998_750_e38/proteus_0.2/20201019_top_black.jpg )
![x ](oem_docs/Bmw/1998_750_e38/proteus_0.2/20201019_top_grey.jpg )
![x ](oem_docs/Bmw/1998_750_e38/proteus_0.2/20201019_back_black.jpg )
![x ](oem_docs/Bmw/1998_750_e38/proteus_0.2/20201019_back_grey.jpg )