undo change
This commit is contained in:
parent
abf0f90201
commit
0fb0661631
|
@ -117,7 +117,7 @@ rusEFI Console command:
|
|||
* *In "Fixed" mode, you can manually set the fixed pulse duration (in ms) in the next text field.*
|
||||
|
||||
* *In "Fuel Map" mode, the "Running" fuel math used for cranking.*
|
||||
> <img src="FAQ/icons/hint.png" style="vertical-align:middle"> *Hint: Please make sure your Running fuel tables are extended into the low RPM range for cranking.*
|
||||
> <img src="FAQ/icons/hint.png" style="vertical-align:middle"> *Hint: Please make sure your [Running fuel tables](Running) are extended into the low RPM range for cranking.*
|
||||
|
||||
### Base fuel pulse width
|
||||
|
||||
|
|
|
@ -0,0 +1,60 @@
|
|||
|
||||
|
||||
Harness donor:
|
||||
US: 2007+ Nissan Altima & 2007+ Nissan Sentra
|
||||
|
||||
Harness side socket.
|
||||
"Removable front key" style.
|
||||
Left from China, Right removed from Nissan Sentra.
|
||||
![i](Hardware/microrusefi/microRusEfi_connectors/microRusEfi_removable_key_China_and_Nissan_harness_socket.jpg)
|
||||
|
||||
|
||||
Removed from Nissan Sentra - square terminals.
|
||||
Left large terminal. Right small pin terminal.
|
||||
|
||||
![i](Hardware/microrusefi/microRusEfi_connectors/microRusEfi_Nissan_crimped_terminals.jpg)
|
||||
|
||||
|
||||
PCB side: [Molex 48 pin PCB plug](https://www.mouser.com/datasheet/2/276/5007620481_PCB_HEADERS-179151.pdf) 5007620481 500762-0481
|
||||
|
||||
PCB side "grey": 5007620482 500762-0482 (we have not use this one so far)
|
||||
|
||||
PCB side "brown": 5007620483 500762-0483 (Compatible with Lada & Nissan ECU plug)
|
||||
|
||||
Wire cap 643201301
|
||||
|
||||
Harness side connector 64320-1311 or 64320-3311. Blind plugs 64325-1010 and 64325-1023.
|
||||
|
||||
TODO investigate Flat case option 36638-0002
|
||||
|
||||
|
||||
From Mouser, Molex.
|
||||
|
||||
Left large pin 64323-1039.
|
||||
Right small pin 64322-1039.
|
||||
todo
|
||||
|
||||
|
||||
|
||||
"Side clip" style harness socket, both from China.
|
||||
![i](Hardware/microrusefi/microRusEfi_connectors/microRusEfi_side_clip_China_harness_socket.jpg)
|
||||
|
||||
|
||||
Terminals
|
||||
|
||||
J-48817-232
|
||||
|
||||
# Lada as harness donor
|
||||
|
||||
Complete used harness for Lada could be acquired pretty cheap in some parts of the world. On same Lada vehicles ECU
|
||||
is in the cabin (unline Nissan ECU in dirty engine bay) so we get pretty clean crimped connector with about 30 wires already in
|
||||
it. The missing wires could be taken from the smaller ECU connector.
|
||||
|
||||
With a utility knife you need to cut 4 keys from inside the male part to mate default microRusEfi connector with a brown plug. Two center keys could be left
|
||||
as is.
|
||||
|
||||
|
||||
![i](Hardware/microrusefi/microRusEfi_connectors/microRusEfi_helping_black_plug_with_brown.jpg)
|
||||
|
||||
|
||||
![i](Hardware/microrusefi/microRusEfi_connectors/microRusEfi_lada_donor_harness.jpg)
|
Loading…
Reference in New Issue