update "Emulating a serial port to connect to Tunerstudio lite" (#254)
* update "Emulating a serial port to connect to Tunerstudio lite" a required step for first use was missing * Update Virtual-simulator.md
This commit is contained in:
parent
385f80ab41
commit
4e79cee971
|
@ -42,7 +42,11 @@ choose the driver "Standard Protocols Driver" and connection type "TCP/IP - WiFi
|
|||
|
||||
## Emulating a serial port to connect to Tunerstudio lite
|
||||
|
||||
If you prefer using the free version of Tunerstudio - Tunerstudio lite - you'll need to install a serial port emulator from [here](https://www.hw-group.com/software/hw-vsp3-virtual-serial-port#download). You'll need to emulate a port on your PC. The only thing that you'll need to do is to choose a port name, COM100 for example, and to change the port address to 29002.
|
||||
If you prefer using the free version of Tunerstudio - Tunerstudio lite - you'll need to install a serial port emulator
|
||||
from [here](https://www.hw-group.com/software/hw-vsp3-virtual-serial-port#download).
|
||||
After download, install it, then run the configuration application "HW Virtual Serial Port".
|
||||
- switch from "read only access" to "admin access" by clicking "Login" button
|
||||
- choose a port name, COM100 for example, and change the port address to 29002.
|
||||
|
||||
|
||||
|
||||
|
@ -77,7 +81,7 @@ and
|
|||
|
||||
`telnet localhost 29002`
|
||||
|
||||
to make sure that TS protocol is alive.
|
||||
to make sure that Tunerstudio protocol is alive.
|
||||
|
||||
Expected behavior is that connection would be established. If it does not, you might need to look in firewall settings.
|
||||
|
||||
|
|
Loading…
Reference in New Issue