rusefi
/
rusefi_documentation
mirror of https://github.com/rusefi/rusefi_documentation.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Merge pull request #282 from mi-hol/master 

fix invalid references
This commit is contained in:
mi-hol 2022-12-15 15:08:04 +01:00 committed by GitHub
parent d1fbc51c2f 23d4525a66
commit 4f11c856d9
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
5 changed files with 100 additions and 76 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
.vscode/settings.json vendored
View File

@ -4,6 +4,7 @@
"Altima",
"Aristo",
"Avenir",
"Baro",
"Berlingo",
"Celica",
"DOHC",

16
Overview/TS_generated/rusEFI-project-Idle.md
View File

@ -1,5 +1,7 @@
# [rusEFI project](rusEFI-project)
## Idle
[Idle settings](#idle-settings)
[Idle hardware](#idle-hardware)
@ -11,7 +13,8 @@
[Warmup Idle multiplier](#warmup-idle-multiplier)
### Idle settings
![x](Overview/TS_generated/dialog_Idle_settings.png)
![x](/Overview/TS_generated/dialog_Idle_settings.png)
use ETB for idle: This setting allows the ETB to act as the idle air control valve and move to regulate the airflow at idle.
@ -36,7 +39,8 @@ PID Extra for low RPM(%): Increases PID reaction for RPM<target by adding extra
Use IAC PID Multiplier Table: This flag allows to use a special 'PID Multiplier' table (0.0-1.0) to compensate for nonlinear nature of IAC-RPM controller
### Idle hardware
![x](Overview/TS_generated/dialog_Idle_hardware.png)
![x](/Overview/TS_generated/dialog_Idle_hardware.png)
Use Stepper: This setting should only be used if you have a stepper motor idle valve and a stepper motor driver installed.
@ -51,13 +55,15 @@ Two-wire mode: TLE7209 uses two-wire mode. TLE9201 and VNH2SP30 do NOT use two w
Two-wire mode: TLE7209 uses two-wire mode. TLE9201 and VNH2SP30 do NOT use two wire mode.
### Idle Target RPM
![x](Overview/TS_generated/dialog_Idle_Target_RPM.png)
![x](/Overview/TS_generated/dialog_Idle_Target_RPM.png)
### Closed-loop idle timing
![x](Overview/TS_generated/dialog_Closed-loop_idle_timing.png)
![x](/Overview/TS_generated/dialog_Closed-loop_idle_timing.png)
### Warmup Idle multiplier
![x](Overview/TS_generated/dialog_Warmup_Idle_multiplier.png)
![x](/Overview/TS_generated/dialog_Warmup_Idle_multiplier.png)
generated by class com.rusefi.MdGenerator on Fri May 01 15:24:28 EDT 2020

19
Overview/TS_generated/rusEFI-project-Ignition.md
View File

@ -1,5 +1,7 @@
# [rusEFI project](rusEFI-project)
## Ignition
[Ignition settings](#ignition-settings)
[Dwell](#dwell)
@ -13,7 +15,8 @@
[Ignition Intake Air Temp correction](#ignition-intake-air-temp-correction)
### Ignition settings
![x](Overview/TS_generated/dialog_Ignition_settings.png)
![x](/Overview/TS_generated/dialog_Ignition_settings.png)
Two wire wasted: This is needed if your coils are individually wired (COP) and you wish to use batch ignition (wasted spark).
@ -24,19 +27,23 @@ Use TPS-based Advance Table: This flag allows to use TPS for ignition lookup whi
Dizzy out Pin: This implementation makes a pulse every time one of the coils is charged, using coil dwell for pulse width. See also tachOutputPin
### Dwell
![x](Overview/TS_generated/dialog_Dwell.png)
![x](/Overview/TS_generated/dialog_Dwell.png)
### Ignition Cylinder Extra Timing
![x](Overview/TS_generated/dialog_Ignition_Cylinder_Extra_Timing.png)
![x](/Overview/TS_generated/dialog_Ignition_Cylinder_Extra_Timing.png)
### Ignition Table
![x](Overview/TS_generated/dialog_Ignition_Table.png)
![x](/Overview/TS_generated/dialog_Ignition_Table.png)
### Warmup timing correction
![x](Overview/TS_generated/dialog_Warmup_timing_correction.png)
![x](/Overview/TS_generated/dialog_Warmup_timing_correction.png)
### Ignition Intake Air Temp correction
![x](Overview/TS_generated/dialog_Ignition_Intake_Air_Temp_correction.png)
![x](/Overview/TS_generated/dialog_Ignition_Intake_Air_Temp_correction.png)
generated by class com.rusefi.MdGenerator on Fri May 01 15:24:28 EDT 2020

61
Overview/TS_generated/rusEFI-project-Sensors.md
View File

@ -1,5 +1,7 @@
# [rusEFI project](rusEFI-project)
## Sensors
[Trigger Inputs](#trigger-inputs)
[Other Sensor Inputs](#other-sensor-inputs)
@ -32,7 +34,7 @@
[Narrow to Wideband approximation](#narrow-to-wideband-approximation)
[CJ125 Settings (wbo decoder)](#cj125-settings-(wbo-decoder))
[CJ125 Settings (wbo decoder)](#cj125-settings-wbo-decoder)
[Speed sensor](#speed-sensor)
@ -41,7 +43,8 @@
[EGT inputs](#egt-inputs)
### Trigger Inputs
![x](Overview/TS_generated/dialog_Trigger_Inputs.png)
![x](/Overview/TS_generated/dialog_Trigger_Inputs.png)
Invert Primary: This setting flips the signal from the primary engine speed sensor.
@ -51,39 +54,48 @@ Cam Sync/VVT input: Camshaft input could be used either just for engine phase de
TODO #660
### Other Sensor Inputs
![x](Overview/TS_generated/dialog_Other_Sensor_Inputs.png)
![x](/Overview/TS_generated/dialog_Other_Sensor_Inputs.png)
Throttle Up switch: Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata
### Analog Input Settings
![x](Overview/TS_generated/dialog_Analog_Input_Settings.png)
![x](/Overview/TS_generated/dialog_Analog_Input_Settings.png)
### CLT sensor
![x](Overview/TS_generated/dialog_CLT_sensor.png)
![x](/Overview/TS_generated/dialog_CLT_sensor.png)
### IAT sensor
![x](Overview/TS_generated/dialog_IAT_sensor.png)
![x](/Overview/TS_generated/dialog_IAT_sensor.png)
### aux1 Thermistor Settings
![x](Overview/TS_generated/dialog_aux1_Thermistor_Settings.png)
![x](/Overview/TS_generated/dialog_aux1_Thermistor_Settings.png)
### aux2 Thermistor Settings
![x](Overview/TS_generated/dialog_aux2_Thermistor_Settings.png)
![x](/Overview/TS_generated/dialog_aux2_Thermistor_Settings.png)
### TPS
![x](Overview/TS_generated/dialog_TPS.png)
![x](/Overview/TS_generated/dialog_TPS.png)
TPS low value detection threshold(%): TPS error detection, what TPS % value is unrealistically low
TPS high value detection threshold(%): TPS error detection, what TPS % value is unrealistically high
### Accelerator pedal
![x](Overview/TS_generated/dialog_Accelerator_pedal.png)
![x](/Overview/TS_generated/dialog_Accelerator_pedal.png)
Down (WOT) voltage: Pedal in the floor
### MAP sensor
![x](Overview/TS_generated/dialog_MAP_sensor.png)
![x](/Overview/TS_generated/dialog_MAP_sensor.png)
Measure Map Only In One Cylinder: Useful for individual intakes
@ -92,25 +104,28 @@ Measure Map Only In One Cylinder: Useful for individual intakes
Measure Map Only In One Cylinder: Useful for individual intakes
### MAP sampling
![x](Overview/TS_generated/dialog_MAP_sampling.png)
![x](/Overview/TS_generated/dialog_MAP_sampling.png)
### Baro sensor
![x](Overview/TS_generated/dialog_Baro_sensor.png)
![x](/Overview/TS_generated/dialog_Baro_sensor.png)
### MAF sensor
![x](Overview/TS_generated/dialog_MAF_sensor.png)
### MAF sensor
![x](Overview/TS_generated/dialog_MAF_sensor.png)
![x](/Overview/TS_generated/dialog_MAF_sensor.png)
### EGO sensor
![x](Overview/TS_generated/dialog_EGO_sensor.png)
![x](/Overview/TS_generated/dialog_EGO_sensor.png)
### Narrow to Wideband approximation
![x](Overview/TS_generated/dialog_Narrow_to_Wideband_approximation.png)
![x](/Overview/TS_generated/dialog_Narrow_to_Wideband_approximation.png)
### CJ125 Settings (wbo decoder)
![x](Overview/TS_generated/dialog_CJ125_Settings_wbo_decoder.png)
![x](/Overview/TS_generated/dialog_CJ125_Settings_wbo_decoder.png)
Is UA input divided?: Is your UA CJ125 output wired to MCU via resistor divider?
@ -118,13 +133,15 @@ Is UR input divided?: Is your UR CJ125 output wired to MCU via resistor divider?
Looks like 3v range should be enough, divider generally not needed.
### Speed sensor
![x](Overview/TS_generated/dialog_Speed_sensor.png)
![x](/Overview/TS_generated/dialog_Speed_sensor.png)
### Oil pressure
![x](Overview/TS_generated/dialog_Oil_pressure.png)
![x](/Overview/TS_generated/dialog_Oil_pressure.png)
### EGT inputs
![x](Overview/TS_generated/dialog_EGT_inputs.png)
![x](/Overview/TS_generated/dialog_EGT_inputs.png)
generated by class com.rusefi.MdGenerator on Fri May 01 15:24:28 EDT 2020

79
Overview/TS_generated/rusEFI-project.md
View File

@ -1,7 +1,9 @@
# [Base Engine](rusEFI-project-Base-Engine)
# rusEFI Project
<a href='rusEFI-project-Base-Engine'>![x](Overview/TS_generated/top_level_Base_Engine.png)
</a>[Base Engine Settings](rusEFI-project-Base-Engine#base-engine-settings)
## [Base Engine](rusEFI-project-Base-Engine)
[x](/Overview/TS_generated/top_level_Base_Engine.png)
[Base Engine Settings](rusEFI-project-Base-Engine#base-engine-settings)
[Trigger](rusEFI-project-Base-Engine#trigger)
@ -11,7 +13,7 @@
[Starter relay output](rusEFI-project-Base-Engine#starter-relay-output)
[Fuel pump rail](rusEFI-project-Base-Engine#fuel-pump--rail)
[Fuel pump rail](rusEFI-project-Base-Engine#fuel-pump-rail)
[Fan Settings](rusEFI-project-Base-Engine#fan-settings)
@ -21,11 +23,10 @@
[Status LEDs](rusEFI-project-Base-Engine#status-leds)
## [Fuel](rusEFI-project-Fuel)
# [Fuel](rusEFI-project-Fuel)
<a href='rusEFI-project-Fuel'>![x](Overview/TS_generated/top_level_Fuel.png)
</a>[Injection settings](rusEFI-project-Fuel#injection-settings)
[x](/Overview/TS_generated/top_level_Fuel.png)
[Injection settings](rusEFI-project-Fuel#injection-settings)
[Injector dead time](rusEFI-project-Fuel#injector-dead-time)
@ -43,17 +44,16 @@
[tCharge Settings](rusEFI-project-Fuel#tcharge-settings)
[Accel/Decel Enrichment](rusEFI-project-Fuel#accel/decel-enrichment)
[Acceleration or Deceleration Enrichment](rusEFI-project-Fuel#acceleration-or-deceleration-enrichment)
[TPS/TPS Acceleration Extra Fuel(ms)](rusEFI-project-Fuel#tps/tps-acceleration-extra-fuel(ms))
[TPS Acceleration Extra Fuel](rusEFI-project-Fuel#tps-acceleration-extra-fuel)
[Engine Load Acceleration Enrichment Taper](rusEFI-project-Fuel#engine-load-acceleration-enrichment-taper)
## [Ignition](rusEFI-project-Ignition)
# [Ignition](rusEFI-project-Ignition)
<a href='rusEFI-project-Ignition'>![x](Overview/TS_generated/top_level_Ignition.png)
</a>[Ignition settings](rusEFI-project-Ignition#ignition-settings)
[x](/Overview/TS_generated/top_level_Ignition.png)
[Ignition settings](rusEFI-project-Ignition#ignition-settings)
[Dwell](rusEFI-project-Ignition#dwell)
@ -65,11 +65,10 @@
[Ignition Intake Air Temp correction](rusEFI-project-Ignition#ignition-intake-air-temp-correction)
## [Cranking](rusEFI-project-Cranking)
# [Cranking](rusEFI-project-Cranking)
<a href='rusEFI-project-Cranking'>![x](Overview/TS_generated/top_level_Cranking.png)
</a>[Cranking Settings](rusEFI-project-Cranking#cranking-settings)
[x](/Overview/TS_generated/top_level_Cranking.png)
[Cranking Settings](rusEFI-project-Cranking#cranking-settings)
[Cranking Coolant Temperature Multiplier](rusEFI-project-Cranking#cranking-coolant-temperature-multiplier)
@ -77,11 +76,10 @@
[Cranking TPS Multiplier](rusEFI-project-Cranking#cranking-tps-multiplier)
## [Idle](rusEFI-project-Idle)
# [Idle](rusEFI-project-Idle)
<a href='rusEFI-project-Idle'>![x](Overview/TS_generated/top_level_Idle.png)
</a>[Idle settings](rusEFI-project-Idle#idle-settings)
[x](/Overview/TS_generated/top_level_Idle.png)
[Idle settings](rusEFI-project-Idle#idle-settings)
[Idle hardware](rusEFI-project-Idle#idle-hardware)
@ -91,11 +89,10 @@
[Warmup Idle multiplier](rusEFI-project-Idle#warmup-idle-multiplier)
## [Advanced](rusEFI-project-Advanced)
# [Advanced](rusEFI-project-Advanced)
<a href='rusEFI-project-Advanced'>![x](Overview/TS_generated/top_level_Advanced.png)
</a>[Boost Control](rusEFI-project-Advanced#boost-control)
[x](/Overview/TS_generated/top_level_Advanced.png)
[Boost Control](rusEFI-project-Advanced#boost-control)
[General Purpose PWM 1](rusEFI-project-Advanced#general-purpose-pwm-1)
@ -129,11 +126,10 @@
[FSIO Curve #4](rusEFI-project-Advanced#fsio-curve-#4)
## [Sensors](rusEFI-project-Sensors)
# [Sensors](rusEFI-project-Sensors)
<a href='rusEFI-project-Sensors'>![x](Overview/TS_generated/top_level_Sensors.png)
</a>[Trigger Inputs](rusEFI-project-Sensors#trigger-inputs)
[x](/Overview/TS_generated/top_level_Sensors.png)
[Trigger Inputs](rusEFI-project-Sensors#trigger-inputs)
[Other Sensor Inputs](rusEFI-project-Sensors#other-sensor-inputs)
@ -173,15 +169,14 @@
[EGT inputs](rusEFI-project-Sensors#egt-inputs)
## [Controller](rusEFI-project-Controller)
# [Controller](rusEFI-project-Controller)
[x](/Overview/TS_generated/top_level_Controller.png)
[ECU stimulator](rusEFI-project-Controller#ecu-stimulator)
<a href='rusEFI-project-Controller'>![x](Overview/TS_generated/top_level_Controller.png)
</a>[ECU stimulator](rusEFI-project-Controller#ecu-stimulator)
[Data logging Settings](rusEFI-project-Controller#data-logging-settings)
[Datalogging Settings](rusEFI-project-Controller#datalogging-settings)
[Bench Test & Commands](rusEFI-project-Controller#bench-test-&-commands)
[Bench Test and Commands](rusEFI-project-Controller#bench-test-and-commands)
[Popular vehicles](rusEFI-project-Controller#popular-vehicles)
@ -197,13 +192,13 @@
[TLE8888](rusEFI-project-Controller#tle8888)
[All Pins 1/3](rusEFI-project-Controller#all-pins-1/3)
[All Pins 1 of 3](rusEFI-project-Controller#all-pins-1-of-3)
[All Pins 2/3](rusEFI-project-Controller#all-pins-2/3)
[All Pins 2 of 3](rusEFI-project-Controller#all-pins-2-of-3)
[All Pins 3/3](rusEFI-project-Controller#all-pins-3/3)
[All Pins 3 of 3](rusEFI-project-Controller#all-pins-3-of-3)
[Experimental/Broken](rusEFI-project-Controller#experimental/broken)
[Experimental or Broken](rusEFI-project-Controller#experimental-or-broken)
[Multispark](rusEFI-project-Controller#multispark)
@ -223,6 +218,4 @@
[AntiLag Settings NOT WORKING](rusEFI-project-Controller#antilag-settings-not-working)
generated by class com.rusefi.MdGenerator on Fri May 01 15:24:28 EDT 2020
generated by class com.rusefi.MdGenerator on Fri May 01 15:24:28 EDT 2020 manually corrected!