Updated Proteus (markdown)
This commit is contained in:
parent
038f016aa0
commit
c0c42482ca
|
@ -41,6 +41,6 @@ Source & production files at: https://github.com/mck1117/proteus/
|
||||||
|
|
||||||
## Dev Access
|
## Dev Access
|
||||||
|
|
||||||
Most boards will need a debug header installed if you want to attach a debugger (not used for normal users). The recommended connector is Samtec PN `FTSH-105-01-F-DV-007-K`.
|
Most boards will need a debug header installed if you want to attach a debugger (not used for normal users). The recommended connector is Samtec PN `FTSH-105-01-F-DV-007-K`. When soldering the connector, the keying notch goes towards the center of the board, nearer to the 23p center connector.
|
||||||
|
|
||||||
Any debugger compatible with the standard 10-pin Cortex Debug Header should work, though the [STLINK-V3 Mini](https://www.st.com/en/development-tools/stlink-v3mini.html) is recommmended. It's available for $10-12 US from normal distributors like Mouser/Digikey. A ribbon cable is included so the connector and programmer are all that's required to debug on Proteus.
|
Any debugger compatible with the standard 10-pin Cortex Debug Header should work, though the [STLINK-V3 Mini](https://www.st.com/en/development-tools/stlink-v3mini.html) is recommmended. It's available for $10-12 US from normal distributors like Mouser/Digikey. A ribbon cable is included so the connector and programmer are all that's required to debug on Proteus.
|
Loading…
Reference in New Issue