Merge branch 'master' of https://github.com/OrchardPerformance/rusefi_documentation

Ford-Fox-Body-(88-Ford-Mustang---302-V8).textile

@@ -0,0 +1,35 @@
+
+Mechanical distributor - single not smart two wire coil.
+
+Solenoid idle air control.
+
+8 injectors wired separately.
+
+<pre><code>
+rusEFI  Car     MRE             Desc                    Connection Type
+2	20	Ground	        Main Ground	        Ground
+3	21 	IAC	        Idle Air Controler	Sensor
+5	37/57 	12v +	        Main Power	        Positive Power in
+7	 	???             Shift Light		Ground
+9	14 	IGN1	        Injector 5	        Ground
+10	15	IGN2	        Injector 6	        Ground
+11	42 	IGN3	        Injector 7	        Ground
+12	52 	IGN4	        Injector 8	        Ground
+15	 	USB D -	        Negative USB	        White Wire
+16		USB D +	        Positive USB	        Green Wire
+17		SGND	        Signal Ground USB	Black Wire
+18	07 	CLT / ECT       Engine Coolant Temp   	Sensor
+23	 	IAT	        Intake Air Temp	        Sensor
+25	 	Cam (hall)	Cam Sensor 1	        Sensor
+26	47 	TPS	        Throttle Position	Sensor
+27	 	MAP	        Manifold Air Pressure	Sensor
+32	 	EGT	        Exhaust Gas Temp (AEM)	Sensor
+37	58 	INJ 1	        Injector 1	        Ground
+38	59 	INJ 2	        Injector 2	        Ground
+41	12	INJ 3	        Injector 3	        Ground
+42	13	INJ 4	        Injector 4	        Ground
+44	 	5v +	        5 volt sensor Power	5v + Power Output
+45	 	Crank VR+/hall	Cam Sensor 2	        Sensor
+</code></pre>
+
+"88-91 ECU Diagram":http://www.veryuseful.com/mustang/tech/engine/images/88-91_5.0_EEC_Wiring_Diagram.gif

HOWTO-Remote-Tuning.md

@@ -0,0 +1,11 @@
+Remote tuning is possible over Internet using rusEFI TunerStudio plugin if rusEFI ECU is connector to the internet.
+
+There are three ways to connect rusEFI to internet:
+1) Coming soon: "Broadcast" tab of rusEFI TunerStudio plugin.
+2) rusEFI network_connector tool running for instance on Raspberry Pi
+3) Coming soon: rusEFI Android application.
+
+Connecting to remote ECU is a two step process:
+First you connect rusEFI TunerStudio plugin to remote controller via Internet, and then you connect TunerStudio to rusEFI TunerStudio plugin locally. IP Address "localhost" Port default value 29001.
+
+![x](FAQ/images/TS_plugin_TCP.png)

Hardware/microrusefi/Hardware_microRusEfi_kit_instructions.md

@@ -17,6 +17,10 @@ If in double of your SMD skills please consider fully assembled version.
 
 For component placement please use interactive BOM
 
+[0.5.2](https://rusefi.com/docs/ibom/micro_rusEFI_R0.5.2.html)
+
+[0.5.1](https://rusefi.com/docs/ibom/micro_rusEFI_R0.5.1.html)
+
 [0.5.0](https://rusefi.com/docs/ibom/micro_rusEFI_0.5.0.html)
 
 [0.4.8](https://rusefi.com/docs/ibom/microRusEfi_R0.4.8.html)

MREAdapter48.md

@@ -1,13 +1,15 @@
+[SEE ALSO](Miata-NA-48-pin-board-for-MRE-(version-0.2))
+
 
 High-side jumper should be set for +12v.
 
-Created for 1989-1995 Mazda Miata NA6 and early NA8. Would also work on Mazda Protege, Ford Festiva, Ford Escort GT and probably other relted vehicles.
+Created for 1989-1995 Mazda Miata NA6 and early NA8. Would also work on Mazda Protege, Ford Festiva, Ford Escort GT and probably other related vehicles.
 
 See also [Miata](Miata)
 
 microRusEFI should be set for Hall
 
-[Schematics 0.2](https://github.com/rusefi/rusefi_documentation/raw/master/Hardware/pnp_microRusEfi_48na/microrusefi48adapter_0.2.pdf)
+[Schematics 0.2](https://github.com/rusefi/rusefi_documentation/raw/master/Hardware/pnp_microRusEfi_48na/microrusefi48adapter_0_2.pdf)
 
 [Schematics 0.1](https://github.com/rusefi/rusefi_documentation/raw/master/Hardware/pnp_microRusEfi_48na/microrusefi48adapter_0.1.pdf)
 

Miata-NA-48-pin-board-for-MRE-(version-0.2).md

@@ -64,3 +64,9 @@ Instructions on how to jumper the board for these configurations will be updated
 
 # 4. Connections
 Expansions usually require some wiring. The standard pinout for the connector in NA6 configuration is this below.
+
+# 5. Assemble your own
+If you just get the bare board with all the jumpers installed, there's some things you need to do.
+
+## 5.1. MAP Sensor
+There are two positions for installing a MAP sensor on the board. The sensors used are [MPX4250](https://www.digikey.com/product-detail/en/nxp-usa-inc/MPX4250AP/MPX4250AP-ND/464053). They should be secured with two screws each. [4-40 x 0.5 socket head cap screws](https://www.mcmaster.com/92196A110/) are preferred. Of course, these screws will require some [nuts](https://www.mcmaster.com/91841A005/).

Pages_Sensors_and_Actuators.md

@@ -15,14 +15,14 @@
 
 * [Fuel Overview](Fuel_Overview)
 * List of tested MAP sensors - Coming Soon
+* [GM Map sensor](GM-map-Sensor)
 
 </details>
 
 
 <details><summary><u>MAF Sensors</u></summary>
 
-* [GM Map sensor](GM-map-Sensor)
+* [List of tested MAP sensors](Vault_Of_Sensors)
-* List of tested MAP sensors - Coming Soon
 
 </details>
 

Proteus.md

@@ -1,3 +1,11 @@
+Q: where can I buy a Proteus?
+
+A: as of July 11, 2020 no one sells fully assembled Proteus boards.
+
+With fabrication files for Proteus you can get a 80% assembled unit from JLCPCB. QTY 2 price XXX, QTY 10 price YYY.
+While the most complicated main chip is soldered you would still solder a few dozens of surface mount components. 
+
+
 ![x](Hardware/Proteus/Hardware-Proteus-0.3.jpg)  
 
 Forum thread at: https://rusefi.com/forum/viewtopic.php?f=4&t=1646

TS-Plugin.md

@@ -2,4 +2,6 @@ rusEFI TunerStudio plugin is part of [rusEFI Online](Online) suite.
 
 rusEFI TunerStudio plugin facilitates tune & logs upload.
 
+rusEFI Plugin allows to continuously upload tune as you edit it. If you are offline, tunes are saved into Outbox folder and get uploaded once you gain connectivity.
+
 https://www.youtube.com/watch?v=PozvQICdHWQ

Vault_Of_Sensors.md

@@ -0,0 +1,7 @@
+## MAF sensors 
+
+Ford Slot type MAF sensor 
+PN - Hitachi MAF0012
+plug TE 1-1419168-2
+
+A large number of tested MAF sensors can be found [here](https://rusefi.com/forum/viewtopic.php?f=4&t=1726&p=36419)

_Sidebar.md

@@ -17,6 +17,14 @@
 - [Facebook Users Group](https://www.facebook.com/groups/rusEfi/)
 - [Engines running on rusEFI](List_of_engines_running_rusEfi)
 
+# Pages
+- [Fuel](Pages_Fuel)
+- [Hardware](Pages_Hardware)
+- [Sensors and Actuators](Pages_Sensors_and_Actuators)
+- [Ignition](Pages_Ignition)
+- [Software](Pages_Software)
+- [rusEFI Project](rusEFI-project)
+
 # Features
 
 - [rusEFI project overview](rusEFI-project)
@@ -68,10 +76,4 @@
 - [How to convert from carburetor to EFI](how_to_convert_from_carburetor_to_EFI)
 - [Do I need a wideband oxygen sensor?](do_i_need_wideband_oxygen_sensor)
 
-# Pages
+
-- [Fuel](Pages_Fuel)
-- [Hardware](Pages_Hardware)
-- [Sensors and Actuators](Pages_Sensors_and_Actuators)
-- [Ignition](Pages_Ignition)
-- [Software](Pages_Software)
-- [rusEFI Project](rusEFI-project)

installations/FordFoxBody/Ford-Fox-Body.md

@@ -1,10 +0,0 @@
-
-Mechanical distributor - single not smart two wire coil.
-
-Solenoid idle air control.
-
-8 injectors wired separately.
-
-
-
-John to document wiring here.

rusefi_history/List_of_engines_running_rusEfi.md

@@ -59,3 +59,4 @@
 1. https://rusefi.com/forum/viewtopic.php?f=2&t=1740 1980 kz750 motor (carbs, electronic ignition) 
 1. https://rusefi.com/forum/viewtopic.php?f=3&t=1760 VW 1.8t Drive-by-wire May 31, 2020
 1. https://rusefi.com/forum/viewtopic.php?f=3&t=1734 Miata FE swap 2.0
+1. https://rusefi.com/forum/viewtopic.php?p=37351#p37351 1973 Opel Manta - BMW M42