Merge branch 'master' of https://github.com/OrchardPerformance/rusefi_documentation
This commit is contained in:
OrchardPerformance
commit
f601232d34
Binary file not shown.
|
After Width: | Height: | Size: 62 KiB |
|
|
@ -0,0 +1,35 @@
|
|||
|
||||
Mechanical distributor - single not smart two wire coil.
|
||||
|
||||
Solenoid idle air control.
|
||||
|
||||
8 injectors wired separately.
|
||||
|
||||
<pre><code>
|
||||
rusEFI Car MRE Desc Connection Type
|
||||
2 20 Ground Main Ground Ground
|
||||
3 21 IAC Idle Air Controler Sensor
|
||||
5 37/57 12v + Main Power Positive Power in
|
||||
7 ??? Shift Light Ground
|
||||
9 14 IGN1 Injector 5 Ground
|
||||
10 15 IGN2 Injector 6 Ground
|
||||
11 42 IGN3 Injector 7 Ground
|
||||
12 52 IGN4 Injector 8 Ground
|
||||
15 USB D - Negative USB White Wire
|
||||
16 USB D + Positive USB Green Wire
|
||||
17 SGND Signal Ground USB Black Wire
|
||||
18 07 CLT / ECT Engine Coolant Temp Sensor
|
||||
23 IAT Intake Air Temp Sensor
|
||||
25 Cam (hall) Cam Sensor 1 Sensor
|
||||
26 47 TPS Throttle Position Sensor
|
||||
27 MAP Manifold Air Pressure Sensor
|
||||
32 EGT Exhaust Gas Temp (AEM) Sensor
|
||||
37 58 INJ 1 Injector 1 Ground
|
||||
38 59 INJ 2 Injector 2 Ground
|
||||
41 12 INJ 3 Injector 3 Ground
|
||||
42 13 INJ 4 Injector 4 Ground
|
||||
44 5v + 5 volt sensor Power 5v + Power Output
|
||||
45 Crank VR+/hall Cam Sensor 2 Sensor
|
||||
</code></pre>
|
||||
|
||||
"88-91 ECU Diagram":http://www.veryuseful.com/mustang/tech/engine/images/88-91_5.0_EEC_Wiring_Diagram.gif
|
||||
|
|
@ -0,0 +1,11 @@
|
|||
Remote tuning is possible over Internet using rusEFI TunerStudio plugin if rusEFI ECU is connector to the internet.
|
||||
|
||||
There are three ways to connect rusEFI to internet:
|
||||
1) Coming soon: "Broadcast" tab of rusEFI TunerStudio plugin.
|
||||
2) rusEFI network_connector tool running for instance on Raspberry Pi
|
||||
3) Coming soon: rusEFI Android application.
|
||||
|
||||
Connecting to remote ECU is a two step process:
|
||||
First you connect rusEFI TunerStudio plugin to remote controller via Internet, and then you connect TunerStudio to rusEFI TunerStudio plugin locally. IP Address "localhost" Port default value 29001.
|
||||
|
||||
|
||||
|
|
@ -17,6 +17,10 @@ If in double of your SMD skills please consider fully assembled version.
|
|||
|
||||
For component placement please use interactive BOM
|
||||
|
||||
[0.5.2](https://rusefi.com/docs/ibom/micro_rusEFI_R0.5.2.html)
|
||||
|
||||
[0.5.1](https://rusefi.com/docs/ibom/micro_rusEFI_R0.5.1.html)
|
||||
|
||||
[0.5.0](https://rusefi.com/docs/ibom/micro_rusEFI_0.5.0.html)
|
||||
|
||||
[0.4.8](https://rusefi.com/docs/ibom/microRusEfi_R0.4.8.html)
|
||||
|
|
|
|||
Binary file not shown.
|
After Width: | Height: | Size: 68 KiB |
|
|
@ -1,13 +1,15 @@
|
|||
[SEE ALSO](Miata-NA-48-pin-board-for-MRE-(version-0.2))
|
||||
|
||||
|
||||
High-side jumper should be set for +12v.
|
||||
|
||||
Created for 1989-1995 Mazda Miata NA6 and early NA8. Would also work on Mazda Protege, Ford Festiva, Ford Escort GT and probably other relted vehicles.
|
||||
Created for 1989-1995 Mazda Miata NA6 and early NA8. Would also work on Mazda Protege, Ford Festiva, Ford Escort GT and probably other related vehicles.
|
||||
|
||||
See also [Miata](Miata)
|
||||
|
||||
microRusEFI should be set for Hall
|
||||
|
||||
[Schematics 0.2](https://github.com/rusefi/rusefi_documentation/raw/master/Hardware/pnp_microRusEfi_48na/microrusefi48adapter_0.2.pdf)
|
||||
[Schematics 0.2](https://github.com/rusefi/rusefi_documentation/raw/master/Hardware/pnp_microRusEfi_48na/microrusefi48adapter_0_2.pdf)
|
||||
|
||||
[Schematics 0.1](https://github.com/rusefi/rusefi_documentation/raw/master/Hardware/pnp_microRusEfi_48na/microrusefi48adapter_0.1.pdf)
|
||||
|
||||
|
|
|
|||
|
|
@ -64,3 +64,9 @@ Instructions on how to jumper the board for these configurations will be updated
|
|||
|
||||
# 4. Connections
|
||||
Expansions usually require some wiring. The standard pinout for the connector in NA6 configuration is this below.
|
||||
|
||||
# 5. Assemble your own
|
||||
If you just get the bare board with all the jumpers installed, there's some things you need to do.
|
||||
|
||||
## 5.1. MAP Sensor
|
||||
There are two positions for installing a MAP sensor on the board. The sensors used are [MPX4250](https://www.digikey.com/product-detail/en/nxp-usa-inc/MPX4250AP/MPX4250AP-ND/464053). They should be secured with two screws each. [4-40 x 0.5 socket head cap screws](https://www.mcmaster.com/92196A110/) are preferred. Of course, these screws will require some [nuts](https://www.mcmaster.com/91841A005/).
|
||||
|
|
@ -15,14 +15,14 @@
|
|||
|
||||
* [Fuel Overview](Fuel_Overview)
|
||||
* List of tested MAP sensors - Coming Soon
|
||||
* [GM Map sensor](GM-map-Sensor)
|
||||
|
||||
</details>
|
||||
|
||||
|
||||
<details><summary><u>MAF Sensors</u></summary>
|
||||
|
||||
* [GM Map sensor](GM-map-Sensor)
|
||||
* List of tested MAP sensors - Coming Soon
|
||||
* [List of tested MAP sensors](Vault_Of_Sensors)
|
||||
|
||||
</details>
|
||||
|
||||
|
|
|
|||
|
|
@ -1,3 +1,11 @@
|
|||
Q: where can I buy a Proteus?
|
||||
|
||||
A: as of July 11, 2020 no one sells fully assembled Proteus boards.
|
||||
|
||||
With fabrication files for Proteus you can get a 80% assembled unit from JLCPCB. QTY 2 price XXX, QTY 10 price YYY.
|
||||
While the most complicated main chip is soldered you would still solder a few dozens of surface mount components.
|
||||
|
||||
|
||||
|
||||
|
||||
Forum thread at: https://rusefi.com/forum/viewtopic.php?f=4&t=1646
|
||||
|
|
|
|||
|
|
@ -2,4 +2,6 @@ rusEFI TunerStudio plugin is part of [rusEFI Online](Online) suite.
|
|||
|
||||
rusEFI TunerStudio plugin facilitates tune & logs upload.
|
||||
|
||||
rusEFI Plugin allows to continuously upload tune as you edit it. If you are offline, tunes are saved into Outbox folder and get uploaded once you gain connectivity.
|
||||
|
||||
https://www.youtube.com/watch?v=PozvQICdHWQ
|
||||
|
|
@ -0,0 +1,7 @@
|
|||
## MAF sensors
|
||||
|
||||
Ford Slot type MAF sensor
|
||||
PN - Hitachi MAF0012
|
||||
plug TE 1-1419168-2
|
||||
|
||||
A large number of tested MAF sensors can be found [here](https://rusefi.com/forum/viewtopic.php?f=4&t=1726&p=36419)
|
||||
16
_Sidebar.md
16
_Sidebar.md
|
|
@ -17,6 +17,14 @@
|
|||
- [Facebook Users Group](https://www.facebook.com/groups/rusEfi/)
|
||||
- [Engines running on rusEFI](List_of_engines_running_rusEfi)
|
||||
|
||||
# Pages
|
||||
- [Fuel](Pages_Fuel)
|
||||
- [Hardware](Pages_Hardware)
|
||||
- [Sensors and Actuators](Pages_Sensors_and_Actuators)
|
||||
- [Ignition](Pages_Ignition)
|
||||
- [Software](Pages_Software)
|
||||
- [rusEFI Project](rusEFI-project)
|
||||
|
||||
# Features
|
||||
|
||||
- [rusEFI project overview](rusEFI-project)
|
||||
|
|
@ -68,10 +76,4 @@
|
|||
- [How to convert from carburetor to EFI](how_to_convert_from_carburetor_to_EFI)
|
||||
- [Do I need a wideband oxygen sensor?](do_i_need_wideband_oxygen_sensor)
|
||||
|
||||
# Pages
|
||||
- [Fuel](Pages_Fuel)
|
||||
- [Hardware](Pages_Hardware)
|
||||
- [Sensors and Actuators](Pages_Sensors_and_Actuators)
|
||||
- [Ignition](Pages_Ignition)
|
||||
- [Software](Pages_Software)
|
||||
- [rusEFI Project](rusEFI-project)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,10 +0,0 @@
|
|||
|
||||
Mechanical distributor - single not smart two wire coil.
|
||||
|
||||
Solenoid idle air control.
|
||||
|
||||
8 injectors wired separately.
|
||||
|
||||
|
||||
|
||||
John to document wiring here.
|
||||
|
|
@ -59,3 +59,4 @@
|
|||
1. https://rusefi.com/forum/viewtopic.php?f=2&t=1740 1980 kz750 motor (carbs, electronic ignition)
|
||||
1. https://rusefi.com/forum/viewtopic.php?f=3&t=1760 VW 1.8t Drive-by-wire May 31, 2020
|
||||
1. https://rusefi.com/forum/viewtopic.php?f=3&t=1734 Miata FE swap 2.0
|
||||
1. https://rusefi.com/forum/viewtopic.php?p=37351#p37351 1973 Opel Manta - BMW M42
|
||||
|
|
|
|||
Loading…
Reference in New Issue