91 lines
3.1 KiB
Markdown
91 lines
3.1 KiB
Markdown
# Proteus
|
|
|
|
[Proteus Manual](Proteus-Manual)
|
|
|
|
Q: where can I buy a Proteus?
|
|
|
|
A: [As of Feb 2022 please DM Andrey on the forum, Proteus is in stock just not listed on eBay!](http://shop.rusefi.com/)
|
|
|
|
With fabrication files for Proteus you can get a 80% assembled unit from JLCPCB.
|
|
|
|
|
|
|
|
Forum thread [here](https://rusefi.com/forum/viewtopic.php?f=4&t=1646)
|
|
|
|
Source & production files [here](https://github.com/mck1117/proteus/)
|
|
|
|
[Fabrication](Hardware-Proteus-Fabrication)
|
|
|
|
## TE Ampseal Connectors
|
|
|
|
[Ampseal tutorial video](https://www.youtube.com/watch?v=24bNFu7a9lc)
|
|
|
|
[Ampseal application specification (instruction manual)](https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Specification+Or+Standard%7F114-16016%7FM%7Fpdf%7FEnglish%7FENG_SS_114-16016_M.pdf%7FN-A): This document includes how to crimp connectors, how to install them in to headers, and how to remove pins from a header.
|
|
|
|
[Image showing mod for V0.3 DFU problem](Images/Proteus_DFU_Hack.jpg)
|
|
|
|
<a name="3d_cases"/>
|
|
|
|
## 3D cases
|
|
|
|
[vented/unvented by Kneelo](Hardware/Proteus/Proteus_0.3_case_by_kneelo.zip)
|
|
|
|
[by OrchardPerformance](https://rusefi.com/forum/download/file.php?id=7242)
|
|
|
|
[by Kon](https://github.com/ksmola/proteus-case)
|
|
|
|
We have a plastic CNCed case [here](https://www.ebay.com/itm/333958050504)
|
|
|
|
McM 90417A118
|
|
black oxide, #4 3/8" long screws recommended
|
|
|
|
<a name="dev"/>
|
|
|
|
## Dev Access
|
|
|
|
Most boards will need a debug header installed if you want to attach a debugger (not used for normal users). The recommended connector is Samtec PN `FTSH-105-01-F-DV-007-K`. When soldering the connector, the keying notch goes towards the center of the board, nearer to the 23p center connector.
|
|
|
|
Any debugger compatible with the standard 10-pin Cortex Debug Header should work, though the [STLINK-V3 Mini](https://www.st.com/en/development-tools/stlink-v3mini.html) is recommmended. It's available for $10-12 US from normal distributors like Mouser/Digikey. A ribbon cable is included so the connector and programmer are all that's required to debug on Proteus.
|
|
|
|
## Wiring
|
|
|
|
20A Power GND
|
|
|
|
10A 12V_MR
|
|
|
|
5A ETB
|
|
|
|
2A Low side, High side
|
|
|
|
0.5A 12V_IGN
|
|
|
|
## Adapters DONE
|
|
|
|
[Proteus Honda K 125 Adapter](https://github.com/rusefi/proteus-Honda-K-125-adapter)
|
|
|
|
[Proteus M73TU Adapter](https://github.com/rusefi/proteus-m73tu-adapter)
|
|
|
|
[Proteus Honda OBD2A Adapter](https://github.com/rusefi/proteus-Honda-OBD2A-adapter)
|
|
|
|
[Proteus M54 Adapter](https://github.com/rusefi/proteus-M54-adapter)
|
|
|
|
[Proteus Ford](https://github.com/rusefi/proteus-mustang5.0-60-pin)
|
|
|
|
[Proteus Mitsubishi 76 adapter](https://github.com/rusefi/proteus-mitsubishi76-adapter)
|
|
|
|
## Adapters WIP
|
|
|
|
[Proteus 80pin VAG adapter](https://github.com/rusefi/proteus-80-pin-vag-adapter)
|
|
|
|
[Proteus 2004 STI Adapter](https://github.com/rusefi/proteus-2004sti-adapter)
|
|
|
|
[Proteus Honda OBD1 Adapter](https://github.com/rusefi/proteus-Honda-OBD1-adapter/)
|
|
|
|
[Proteus N73 Adapter](https://github.com/rusefi/proteus-N73-adapter/)
|
|
|
|
[Proteus 68pin VAG adapter](https://github.com/rusefi/proteus-68-pin-vag-adapter)
|
|
|
|
## Adapters maybe NOT
|
|
|
|
[Proteus RX8 Adapter](https://github.com/rusefi/proteus-rx8-adapter)
|