2.0 KiB
Q: where can I buy a Proteus?
A: https://www.ebay.com/itm/333811680319
With fabrication files for Proteus you can get a 80% assembled unit from JLCPCB. QTY 2 price XXX, QTY 10 price YYY. While the most complicated main chip is soldered you would still solder a few dozens of surface mount components.
Forum thread at: https://rusefi.com/forum/viewtopic.php?f=4&t=1646
Source & production files at: https://github.com/mck1117/proteus/
TE Ampseal Connectors
Ampseal application specification (instruction manual): This document includes how to crimp connectors, how to install them in to headers, and how to remove pins from a header.
Image showing mod for V0.3 DFU problem
3D cases
Dev Access
Most boards will need a debug header installed if you want to attach a debugger (not used for normal users). The recommended connector is Samtec PN FTSH-105-01-F-DV-007-K. When soldering the connector, the keying notch goes towards the center of the board, nearer to the 23p center connector.
Any debugger compatible with the standard 10-pin Cortex Debug Header should work, though the STLINK-V3 Mini is recommmended. It's available for $10-12 US from normal distributors like Mouser/Digikey. A ribbon cable is included so the connector and programmer are all that's required to debug on Proteus.