69 lines
2.6 KiB
Markdown
69 lines
2.6 KiB
Markdown
# Vault Of Mercedes-Benz OEM Information
|
|
|
|
## M111 - I4
|
|
|
|
99 SLK230 See [Mercedes-C230-and-SLK230](Mercedes-C230-and-SLK230)
|
|
|
|
[M111 Variants Wiki](https://en.wikipedia.org/wiki/Mercedes-Benz_M111_engine)
|
|
|
|
[HOWTO M111 on microRusEFI](HOWTO-M111-on-microRusEFI)
|
|
|
|
Jimmy, Scott have M111 2.3 Compressor engine, both as swaps into 190e body [wireing detailes](https://docs.google.com/spreadsheets/d/1I-lZKRajTiEGFUXdZpXEtKF2pymlOo-lPahy3cLMnl4)
|
|
|
|
Alex has M111 1.8 (now swaped M111.961)
|
|
[Forum](https://rusefi.com/forum/viewtopic.php?f=2&t=1700)
|
|
|
|
[w202.018 C180 MY99](OEM-Docs/Mercedes/w202c180m111wiring4.pdf)
|
|
|
|
[ME 2.1 description/Pinout](OEM-Docs/Mercedes/motronic.pdf)
|
|
|
|
## M112 v6 320
|
|
|
|
[1999-e320 Connector and Wiring](1999-e320)
|
|
|
|
## M113 v8
|
|
|
|
### 430
|
|
|
|
[1999-e430 Connector and Wiring](1999-e430)
|
|
|
|
[2000-s430 Connector and Wiring](2000-s430)
|
|
|
|
[Mercedes-v8 Wiring](Mercedes-v8)
|
|
|
|
M113K is 113.990 or 113.991? Looks like 134 pin connector?
|
|
|
|
M156 looks like 154 pin connector? [WebETM Starfinder](http://benz.ehost.tj/) is amazing?
|
|
|
|
2011 W212 E63 1569001300 ME9.7
|
|
|
|
## 1997 S320
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## Mercedes OEM Engine harness layout (ME2.0/1/8)
|
|
|
|
This is helpful information for swapping or building your own "improved" Engine Harness.
|
|
ME2.0/1, (Roughly MY96/7 to MY99), the stock ECM for a Hellen128 system will have 2 plugs for E/F in the ECM, and then a handful of other plugs depending on chassis.
|
|
W210 chassis will have 210 545 81 28 (Black Strip Plug), R129 will have 029 545 72 28 (Green Oval Plug), W202/208/170 may have both. In addition to the Engine Harness, most cars with ME2.0/1/8 ECMs also have rear mounted batteries, there will be a bulkhead connector on the firewall which connects to the starter; these cars will also have 722.6 Transmissions, which have a 13 pin connector on the right side of the transmission.
|
|
|
|
The strip or oval plugs connect a handful of accessory sensors, power leads, and the starter wire. *In General*, on a MB wiring harness, plain brown is GND, plain red is +V, purple is starter circuit.
|
|
|
|
|
|
|
|
Seen here is a 029 545 72 28 from a MY97 R129 SL320.
|
|
Purple wire on pin 13 is starter signal
|
|
Blue/Yellow wire on pin 12 is A/C Compressor
|
|
Blue/Green wire on pin 9 is a sensor on the Oil Filter housing
|
|
Brn/Wht wire on pin 7 is GND
|
|
Brn/Wht wire on pin 6 is ECM GND
|
|
Black/Green wire on pin 3 is IGN +V
|
|
Red/Green wire on pin 2 is VVT/Resonance Flap +V
|
|
Red/Blue wire on pin 1 is INJ +V
|
|
|
|
NB These plugs are not indicated on the wiring diagrams posted here.
|