58 lines
2.2 KiB
Markdown
58 lines
2.2 KiB
Markdown
# Proteus F767 Programming Instructions
|
|
|
|
Too many of Proteus 0.6 with F767 are behaving strangely in terms of SWD programming. Maybe we have a hardware design issue? Maybe we are missing something?
|
|
|
|
Anyway looks like there is a working procedure, using DFU and STM32CubeProgrammer
|
|
|
|
## Command line option
|
|
|
|
1. use STM32CubeProgrammer software [STM32CubeProgrammer](https://www.st.com/en/development-tools/stm32cubeprog.html)
|
|
|
|
2. connect via USB while holding PROG button
|
|
|
|
3. make sure you have "STM32 BOOTLOADER" driver not "STM Device in DFU Mode". If necessary update/install driver from C:\Program Files\STMicroelectronics\STM32Cube\STM32CubeProgrammer\Drivers\DFU_Driver
|
|
|
|
4. Enter cmd.exe, enter C:\Program Files\STMicroelectronics\STM32Cube\STM32CubeProgrammer\bin folder
|
|
|
|
```shell
|
|
STM32_Programmer_CLI.exe -c port=usb1 -ob nDBANK=0
|
|
```
|
|
|
|
5. from same command line prompt
|
|
|
|
```shell
|
|
STM32_Programmer_CLI.exe -c port=usb1 -e all
|
|
```
|
|
|
|
6. download [Proteus F7 Firmware bundle 2021.10.08](https://github.com/rusefi/rusefi/releases/download/2021.10.08_release/rusefi_bundle_proteus_f7.zip) and un-compress and copy rusefi.hex to C:\Program Files\STMicroelectronics\STM32Cube\STM32CubeProgrammer\bin folder
|
|
|
|
7. from same command line prompt
|
|
|
|
```shell
|
|
STM32_Programmer_CLI.exe -c port=usb1 -w rusefi.hex -v -s
|
|
```
|
|
|
|
Done!
|
|
|
|
## GUI option
|
|
|
|
1. use STM32CubeProgrammer software [STM32CubeProgrammer](https://www.st.com/en/development-tools/stm32cubeprog.html)
|
|
|
|
2. connect via USB while holding PROG button
|
|
|
|
3. make sure you have "STM32 BOOTLOADER" driver not "STM Device in DFU Mode". If necessary update/install driver from C:\Program Files\STMicroelectronics\STM32Cube\STM32CubeProgrammer\Drivers\DFU_Driver
|
|
|
|
4. connect STM32CubeProgrammer via USB, follow [this guide](HOWTO-nDBANK) to reset nDBANK flag
|
|
|
|
5. close STM32CubeProgrammer, unplug USB cable, plug USB cable, open STM32CubeProgrammer. STM32CubeProgrammer is finicky you really have to restart it between steps
|
|
|
|
6. erase using "Full Chip Erase"
|
|
|
|
|
|
|
|
7. close STM32CubeProgrammer, unplug USB cable, plug USB cable, open STM32CubeProgrammer.
|
|
|
|
8. program like on the picture
|
|
|
|
|