1.5 KiB
1.5 KiB
microRusEFI DIY
Bare minimum microRusEFI instructions:
Step 1 80% ready microRusEFI
Fabricate "pre-populated" 80% ready microRusEFI at https://jlcpcb.com/
You would need three files to do that - gerbers archive, BOM and placement files."
Check for latest version in repository.
https://github.com/rusefi/hw_microRusEfi
https://github.com/rusefi/hw_microRusEfi/tree/master/gerbers
Step 2 Finish assembly
Order the following 8 parts:
| Qty | PartNumber | Comment |
|---|---|---|
| 1 | TLE88882QKXUMA1 | Power Management Chip |
| 1 | 614105150721 | Vertical microUSB |
| 2 | PTS636 SM43 SMTR LFS | push button |
| 4 | CA064X103K2RACAUTO | capacitor array |
Step 3 Upload firmware
Once you solder 8 parts to your 80% ready microRusEFI upload firmware into micro-controller
https://rusefi.com/build_server/rusefi_bundle_mre_f4.zip
More info
More info like connector & case see https://github.com/rusefi/hw_microRusEfi
For quicker results fully assembled units are available at https://shop.rusefi.com/