41 lines
1.5 KiB
Markdown
41 lines
1.5 KiB
Markdown
# microRusEFI DIY
|
|
|
|
Bare minimum microRusEFI instructions:
|
|
|
|
## Step 1 80% ready microRusEFI
|
|
|
|
Fabricate "pre-populated" 80% ready microRusEFI at [https://jlcpcb.com/](https://jlcpcb.com/)
|
|
|
|
You would need three files to do that - gerbers archive, BOM and placement files."
|
|
|
|
Check for latest version in repository.
|
|
|
|
[https://github.com/rusefi/hw_microRusEfi](https://github.com/rusefi/hw_microRusEfi)
|
|
|
|
[https://github.com/rusefi/hw_microRusEfi/tree/master/gerbers](https://github.com/rusefi/hw_microRusEfi/tree/master/gerbers/)
|
|
|
|
## Step 2 Finish assembly
|
|
|
|
Order the following 8 parts:
|
|
|
|
| Qty | PartNumber | Comment |
|
|
| ----------:|:-------- |:---------------------------------------------------- |
|
|
| 1 | TLE88882QKXUMA1 | Power Management Chip |
|
|
| 1 | 614105150721 | Vertical microUSB |
|
|
| 2 | PTS636 SM43 SMTR LFS | push button |
|
|
| 4 | CA064X103K2RACAUTO | capacitor array |
|
|
|
|
[Saved Cart on Mouser](https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=dacd727e05)
|
|
|
|
## Step 3 Upload firmware
|
|
|
|
Once you solder 8 parts to your 80% ready microRusEFI upload firmware into micro-controller
|
|
|
|
[https://rusefi.com/build_server/rusefi_bundle_mre_f4.zip](https://rusefi.com/build_server/rusefi_bundle_mre_f4.zip)
|
|
|
|
## More info
|
|
|
|
More info like connector & case see [https://github.com/rusefi/hw_microRusEfi](https://github.com/rusefi/hw_microRusEfi)
|
|
|
|
For quicker results fully assembled units are available at [https://shop.rusefi.com/](https://shop.rusefi.com/)
|