34 lines
1.3 KiB
Markdown
34 lines
1.3 KiB
Markdown
## Parameters
|
|
|
|
By default Tuner Studio connectivity is using pin PC10 for TX and PC11 RX, **baud rate 38400**. Do not forget about GND wire.
|
|
|
|
![Communication Settings](Images/communication_settings.png)
|
|
|
|
See also: [TunerStudio Console Commands](Dev-Console-Commands#tuner-studio)
|
|
|
|
Please be sure to use current firmware version with current rusefi.ini project from [http://rusefi.com/build_server/rusefi_firmware.zip build_server]
|
|
|
|
## Troubleshooting Tuner Studio connectivity
|
|
|
|
First of all make sure that you have serial port drivers installed. STMicroelectronics Virtual for microUSB or USB serial for PC10/PC11
|
|
|
|
![Device Manager Ports](Images/device_manager_ports.png)
|
|
|
|
You can test physical connectivity with a terminal application like putty:
|
|
1. connect to the TS port
|
|
2. type 't'
|
|
you are expected to see a response like this:
|
|
|
|
![Expected Response](Images/response.png)
|
|
|
|
Q: I try to connect with Tuner Studio and it says "line:532:rusEfiVersion,20140822@4388 Ford
|
|
Aspire,outpin,c1@PC6,outpin,c2@PA5,ou"?
|
|
|
|
A: what you have is a piece of rusEfi own console text-based protocol, you need to connect TS to the other port.
|
|
|
|
Q: how should it look in Tuner Studio mini terminal?
|
|
|
|
A: like that. Note that now new lines between 't' symbols, note that at first some random stuff was received once and that's OK
|
|
|
|
![TunerStudio Mini Terminal](Images/ts_mini_terminal.png)
|