rusefi_documentation/rusEFI-project-Fuel.md

78 lines
2.7 KiB
Markdown

# [rusEFI project](rusEFI-project)
## Fuel
[Injection settings](#injection-settings)
[Injector dead time](#injector-dead-time)
[Fuel short-term closed-loop correction](#fuel-short-term-closed-loop-correction)
[Coasting Fuel Cutoff Settings](#coasting-fuel-cutoff-settings)
[Fuel Table](#fuel-table)
[Injection Phase](#injection-phase)
[Warmup fuel manual Multiplier](#warmup-fuel-manual-multiplier)
[Intake air temperature fuel Multiplier](#intake-air-temperature-fuel-multiplier)
[tCharge Settings](#tcharge-settings)
[Accel/Decel Enrichment](#accel/decel-enrichment)
[TPS/TPS Acceleration Extra Fuel(ms)](#tps/tps-acceleration-extra-fuel(ms))
[Engine Load Acceleration Enrichment Taper](#engine-load-acceleration-enrichment-taper)
### Injection settings
![x](overview/TS_generated/dialog_Injection_settings.png)
Two wire batch emulation: This is needed if your coils are individually wired and you wish to use batch injection.
enable two_wire_batch_injection
Two wire batch emulation: This is needed if your coils are individually wired and you wish to use batch injection.
enable two_wire_batch_injection
Two wire batch emulation: This is needed if your coils are individually wired and you wish to use batch injection.
enable two_wire_batch_injection
### Injector dead time
![x](overview/TS_generated/dialog_Injector_dead_time.png)
### Fuel short-term closed-loop correction
![x](overview/TS_generated/dialog_Fuel_short-term_closed-loop_correction.png)
### Coasting Fuel Cutoff Settings
![x](overview/TS_generated/dialog_Coasting_Fuel_Cutoff_Settings.png)
Enable Coasting Fuel Cutoff: This setting disables fuel injection while the engine is in overrun, this is useful as a fuel saving measure and to prevent back firing.
TPS Deactivation Threshold(%): percent between 0 and 100 below which the fuel cut is deactivated, this helps low speed drivability.
### Fuel Table
![x](overview/TS_generated/dialog_Fuel_Table.png)
### Injection Phase
![x](overview/TS_generated/dialog_Injection_Phase.png)
### Warmup fuel manual Multiplier
![x](overview/TS_generated/dialog_Warmup_fuel_manual_Multiplier.png)
### Intake air temperature fuel Multiplier
![x](overview/TS_generated/dialog_Intake_air_temperature_fuel_Multiplier.png)
### tCharge Settings
![x](overview/TS_generated/dialog_tCharge_Settings.png)
### Accel/Decel Enrichment
![x](overview/TS_generated/dialog_Accel_Decel_Enrichment.png)
### TPS/TPS Acceleration Extra Fuel(ms)
![x](overview/TS_generated/dialog_TPS_TPS_Acceleration_Extra_Fuelms.png)
### Engine Load Acceleration Enrichment Taper
![x](overview/TS_generated/dialog_Engine_Load_Acceleration_Enrichment_Taper.png)
generated by class com.rusefi.MdGenerator on Fri May 01 15:24:28 EDT 2020