96 lines
2.6 KiB
Markdown
96 lines
2.6 KiB
Markdown
[Download release firmware](https://github.com/rusefi/rusefi/releases/latest/download/rusefi_bundle_hellen72.zip)
|
|
|
|
[Snapshot firmware bundle](https://rusefi.com/build_server/rusefi_bundle_hellen72.zip)
|
|
|
|
|
|
[Issue Tracker](https://github.com/rusefi/hellen-NB2-issues)
|
|
|
|
## Hardware features
|
|
|
|
* knock detection module
|
|
* build-in WBO
|
|
* Two auxiliary low side outputs
|
|
* A/C toggle switch
|
|
* A/C relay control
|
|
|
|
|
|
# User Support
|
|
|
|
[Click here for Support overview](Support)
|
|
|
|
|
|
|
|
# Technical Details
|
|
|
|
[schematic rev C](Hardware/Hellen/hellen72-c-schematic.pdf)
|
|
[Interactive iBom rev C](https://rusefi.com/docs/ibom/hellen72-c-ibom.html)
|
|
|
|
[schematic rev D](Hardware/Hellen/hellen72-d-schematic.pdf)
|
|
[Interactive iBom rev D](https://rusefi.com/docs/ibom/hellen72-d-ibom.html)
|
|
|
|
|
|
[Pinout](https://rusefi.com/docs/pinouts/hellen/helen72/)
|
|
|
|
[Forum DEVELOPMENT thread](https://rusefi.com/forum/viewtopic.php?f=4&t=1947)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
https://github.com/rusefi/rusefi/wiki/It's-complicated
|
|
|
|
|
|
[Mazda Miata 2003](Mazda-Miata-2003) [Mazdaspeed Miata 2005](Mazdaspeed-Miata-2005)
|
|
|
|
![x](Hardware/Hellen/hellen72-c-as-received.jpg)
|
|
|
|
![x](Hardware/Hellen/hellen72a.jpg)
|
|
|
|
# Jumpers (Applies to board version 72a-72c so far)
|
|
in order to run a Miata NB test vehicle:
|
|
|
|
External MAP vs more ignition channels:
|
|
a) if you are going to use an external MAP, then remove "R5 (IGN5)", "R7 (IGN6)" and "R11 (IGN8)"
|
|
|
|
b) or if you NOT using an external MAP (either internal MAP or external MAF, or alpha-N), then remove "R6 (GND)" and "R8 (+5V)"
|
|
|
|
Warning! The board can be damaged if you skip this step!
|
|
|
|
External WBO vs more ignition channels:
|
|
if you want to use an external WBO (AFR) sensor, then remove "R1 (IGN7)"
|
|
|
|
Miata vehicle type:
|
|
a) if you have a Miata 2002 (where we measure the battery voltage from 4T=alternator), then remove "R9 (2003)"
|
|
|
|
b) or if you have a Miata 2003 (where we measure the battery voltage from 4S=ign.switch), then remove "R10 (2002)"
|
|
|
|
### OEM harness add-ons
|
|
The OEM ECU connector uses AMP Multilock .040 and .070 pins.
|
|
|
|
| Board | stm32 pin | |
|
|
|-----|---|---|
|
|
| 4U | MAP| Manifold absolute pressure analog signal from [external sensor](GM-map-sensor) |
|
|
| 4K | +5v | +5v feed for MAP sensor |
|
|
| 3Z | GND | Sensor & USB ground |
|
|
|
|
|
|
# Proto Area Pinout
|
|
|
|
|Proto | stm32 pin |
|
|
|-----|---|
|
|
| EXT_SPI_SCK | |
|
|
| UART_RX | PD6 |
|
|
| UART_TX | PD5 |
|
|
| EXT_IO1 | PB12 |
|
|
| EXT_IO2 | PB13 |
|
|
| | |
|
|
| | |
|
|
|
|
|
|
|
|
[rev C Reference image of jumpers set for external MAP sensor on 2003 miata](https://rusefi.com/forum/download/file.php?id=7570)
|
|
|
|
See [Hellen-WBO](Hellen-WBO)
|
|
|
|
![x](Hardware/Hellen/hellen72-c-connector-cover.jpg) |