2.7 KiB
rusEFI project
Fuel
Fuel short-term closed-loop correction
Intake air temperature fuel Multiplier
TPS/TPS Acceleration Extra Fuel(ms)
Engine Load Acceleration Enrichment Taper
Injection settings
Two wire batch emulation: This is needed if your coils are individually wired and you wish to use batch injection. enable two_wire_batch_injection
Two wire batch emulation: This is needed if your coils are individually wired and you wish to use batch injection. enable two_wire_batch_injection
Two wire batch emulation: This is needed if your coils are individually wired and you wish to use batch injection. enable two_wire_batch_injection
Injector dead time
Fuel short-term closed-loop correction
Coasting Fuel Cutoff Settings
Enable Coasting Fuel Cutoff: This setting disables fuel injection while the engine is in overrun, this is useful as a fuel saving measure and to prevent back firing.
TPS Deactivation Threshold(%): percent between 0 and 100 below which the fuel cut is deactivated, this helps low speed drivability.
Fuel Table
Injection Phase
Warmup fuel manual Multiplier
Intake air temperature fuel Multiplier
tCharge Settings
Accel/Decel Enrichment
TPS/TPS Acceleration Extra Fuel(ms)
Engine Load Acceleration Enrichment Taper
generated by class com.rusefi.MdGenerator on Fri May 01 15:24:28 EDT 2020