2.7 KiB
rusEFI project
Fuel
Fuel short-term closed-loop correction
Intake air temperature fuel Multiplier
Acceleration or Deceleration Enrichment
Engine Load Acceleration Enrichment Taper
Injection settings
Two wire batch emulation: This is needed if your coils are individually wired and you wish to use batch injection. enable two_wire_batch_injection
Two wire batch emulation: This is needed if your coils are individually wired and you wish to use batch injection. enable two_wire_batch_injection
Two wire batch emulation: This is needed if your coils are individually wired and you wish to use batch injection. enable two_wire_batch_injection
Injector dead time
Fuel short-term closed-loop correction
Coasting Fuel Cutoff Settings
Enable Coasting Fuel Cutoff: This setting disables fuel injection while the engine is in overrun, this is useful as a fuel saving measure and to prevent back firing.
TPS Deactivation Threshold(%): percent between 0 and 100 below which the fuel cut is deactivated, this helps low speed drivability.
Fuel Table
Injection Phase
Warmup fuel manual Multiplier
Intake air temperature fuel Multiplier
tCharge Settings
Acceleration or Deceleration Enrichment
TPS Acceleration Extra Fuel
Engine Load Acceleration Enrichment Taper
generated by class com.rusefi.MdGenerator on Fri May 01 15:24:28 EDT 2020