mirror of https://github.com/rusefi/speeduino.git
Remove some old display code that is no longer used
This commit is contained in:
Josh Stewart
parent
c555bbc060
commit
279893f580
|
|
@ -4,6 +4,8 @@ Copyright (C) Josh Stewart
|
|||
A full copy of the license may be found in the projects root directory
|
||||
*/
|
||||
|
||||
#ifdef USE_DISPLAY
|
||||
|
||||
#include <SPI.h>
|
||||
#include <Wire.h>
|
||||
#include "src/Adafruit_SSD1306/Adafruit_GFX.h"
|
||||
|
|
@ -15,7 +17,7 @@ void initialiseDisplay()
|
|||
{
|
||||
//Protection against older pin mappings where the crank/cam signals were on the SDA and SCL pins. This will cause the Arduino to lock hard if you try to initialise i2c devices when a crank signal is coming in
|
||||
if(pinTrigger == 20 || pinTrigger == 21 || pinTrigger2 == 20 || pinTrigger2 == 21) { return; }
|
||||
|
||||
|
||||
switch(configPage1.displayType)
|
||||
{
|
||||
case 1:
|
||||
|
|
@ -29,9 +31,9 @@ void initialiseDisplay()
|
|||
break;
|
||||
case 4:
|
||||
display.SSD1306_SETCOMPINS_V = 0x12;
|
||||
break;
|
||||
break;
|
||||
}
|
||||
|
||||
|
||||
display.begin(SSD1306_SWITCHCAPVCC, 0x3C); // initialize with the I2C addr 0x3C (for the 128x32)
|
||||
display.clearDisplay();
|
||||
display.setTextSize(1);
|
||||
|
|
@ -89,7 +91,7 @@ void updateDisplay()
|
|||
display.print(currentStatus.coolant);
|
||||
break;
|
||||
}
|
||||
|
||||
|
||||
display.setCursor(0,11);
|
||||
switch(configPage1.display3)
|
||||
{
|
||||
|
|
@ -134,7 +136,7 @@ void updateDisplay()
|
|||
display.print(currentStatus.coolant);
|
||||
break;
|
||||
}
|
||||
|
||||
|
||||
display.setCursor(64,0);
|
||||
switch(configPage1.display2)
|
||||
{
|
||||
|
|
@ -159,7 +161,7 @@ void updateDisplay()
|
|||
display.print(currentStatus.freeRAM);
|
||||
break;
|
||||
}
|
||||
|
||||
|
||||
display.setCursor(64,11);
|
||||
switch(configPage1.display4)
|
||||
{
|
||||
|
|
@ -184,10 +186,11 @@ void updateDisplay()
|
|||
display.print(currentStatus.freeRAM);
|
||||
break;
|
||||
}
|
||||
|
||||
|
||||
int barWidth = ldiv(((unsigned long)currentStatus.RPM * 128), 9000).quot;
|
||||
//int barWidth = map(currentStatus.RPM, 0, 9000, 0, 128);
|
||||
display.fillRect(0, 20, barWidth, 10, 1);
|
||||
|
||||
|
||||
display.display();
|
||||
}
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -1,520 +0,0 @@
|
|||
/*
|
||||
This is the core graphics library for all our displays, providing a common
|
||||
set of graphics primitives (points, lines, circles, etc.). It needs to be
|
||||
paired with a hardware-specific library for each display device we carry
|
||||
(to handle the lower-level functions).
|
||||
|
||||
Adafruit invests time and resources providing this open source code, please
|
||||
support Adafruit & open-source hardware by purchasing products from Adafruit!
|
||||
|
||||
Copyright (c) 2013 Adafruit Industries. All rights reserved.
|
||||
|
||||
Redistribution and use in source and binary forms, with or without
|
||||
modification, are permitted provided that the following conditions are met:
|
||||
|
||||
- Redistributions of source code must retain the above copyright notice,
|
||||
this list of conditions and the following disclaimer.
|
||||
- Redistributions in binary form must reproduce the above copyright notice,
|
||||
this list of conditions and the following disclaimer in the documentation
|
||||
and/or other materials provided with the distribution.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
|
||||
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
||||
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
||||
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
#include "Adafruit_GFX.h"
|
||||
#include "glcdfont.c"
|
||||
#ifdef __AVR__
|
||||
#include <avr/pgmspace.h>
|
||||
#else
|
||||
#define pgm_read_byte(addr) (*(const unsigned char *)(addr))
|
||||
#endif
|
||||
|
||||
Adafruit_GFX::Adafruit_GFX(int16_t w, int16_t h):
|
||||
WIDTH(w), HEIGHT(h)
|
||||
{
|
||||
_width = WIDTH;
|
||||
_height = HEIGHT;
|
||||
rotation = 0;
|
||||
cursor_y = cursor_x = 0;
|
||||
textsize = 1;
|
||||
textcolor = textbgcolor = 0xFFFF;
|
||||
wrap = true;
|
||||
}
|
||||
|
||||
// Draw a circle outline
|
||||
void Adafruit_GFX::drawCircle(int16_t x0, int16_t y0, int16_t r,
|
||||
uint16_t color) {
|
||||
int16_t f = 1 - r;
|
||||
int16_t ddF_x = 1;
|
||||
int16_t ddF_y = -2 * r;
|
||||
int16_t x = 0;
|
||||
int16_t y = r;
|
||||
|
||||
drawPixel(x0 , y0+r, color);
|
||||
drawPixel(x0 , y0-r, color);
|
||||
drawPixel(x0+r, y0 , color);
|
||||
drawPixel(x0-r, y0 , color);
|
||||
|
||||
while (x<y) {
|
||||
if (f >= 0) {
|
||||
y--;
|
||||
ddF_y += 2;
|
||||
f += ddF_y;
|
||||
}
|
||||
x++;
|
||||
ddF_x += 2;
|
||||
f += ddF_x;
|
||||
|
||||
drawPixel(x0 + x, y0 + y, color);
|
||||
drawPixel(x0 - x, y0 + y, color);
|
||||
drawPixel(x0 + x, y0 - y, color);
|
||||
drawPixel(x0 - x, y0 - y, color);
|
||||
drawPixel(x0 + y, y0 + x, color);
|
||||
drawPixel(x0 - y, y0 + x, color);
|
||||
drawPixel(x0 + y, y0 - x, color);
|
||||
drawPixel(x0 - y, y0 - x, color);
|
||||
}
|
||||
}
|
||||
|
||||
void Adafruit_GFX::drawCircleHelper( int16_t x0, int16_t y0,
|
||||
int16_t r, uint8_t cornername, uint16_t color) {
|
||||
int16_t f = 1 - r;
|
||||
int16_t ddF_x = 1;
|
||||
int16_t ddF_y = -2 * r;
|
||||
int16_t x = 0;
|
||||
int16_t y = r;
|
||||
|
||||
while (x<y) {
|
||||
if (f >= 0) {
|
||||
y--;
|
||||
ddF_y += 2;
|
||||
f += ddF_y;
|
||||
}
|
||||
x++;
|
||||
ddF_x += 2;
|
||||
f += ddF_x;
|
||||
if (cornername & 0x4) {
|
||||
drawPixel(x0 + x, y0 + y, color);
|
||||
drawPixel(x0 + y, y0 + x, color);
|
||||
}
|
||||
if (cornername & 0x2) {
|
||||
drawPixel(x0 + x, y0 - y, color);
|
||||
drawPixel(x0 + y, y0 - x, color);
|
||||
}
|
||||
if (cornername & 0x8) {
|
||||
drawPixel(x0 - y, y0 + x, color);
|
||||
drawPixel(x0 - x, y0 + y, color);
|
||||
}
|
||||
if (cornername & 0x1) {
|
||||
drawPixel(x0 - y, y0 - x, color);
|
||||
drawPixel(x0 - x, y0 - y, color);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void Adafruit_GFX::fillCircle(int16_t x0, int16_t y0, int16_t r,
|
||||
uint16_t color) {
|
||||
drawFastVLine(x0, y0-r, 2*r+1, color);
|
||||
fillCircleHelper(x0, y0, r, 3, 0, color);
|
||||
}
|
||||
|
||||
// Used to do circles and roundrects
|
||||
void Adafruit_GFX::fillCircleHelper(int16_t x0, int16_t y0, int16_t r,
|
||||
uint8_t cornername, int16_t delta, uint16_t color) {
|
||||
|
||||
int16_t f = 1 - r;
|
||||
int16_t ddF_x = 1;
|
||||
int16_t ddF_y = -2 * r;
|
||||
int16_t x = 0;
|
||||
int16_t y = r;
|
||||
|
||||
while (x<y) {
|
||||
if (f >= 0) {
|
||||
y--;
|
||||
ddF_y += 2;
|
||||
f += ddF_y;
|
||||
}
|
||||
x++;
|
||||
ddF_x += 2;
|
||||
f += ddF_x;
|
||||
|
||||
if (cornername & 0x1) {
|
||||
drawFastVLine(x0+x, y0-y, 2*y+1+delta, color);
|
||||
drawFastVLine(x0+y, y0-x, 2*x+1+delta, color);
|
||||
}
|
||||
if (cornername & 0x2) {
|
||||
drawFastVLine(x0-x, y0-y, 2*y+1+delta, color);
|
||||
drawFastVLine(x0-y, y0-x, 2*x+1+delta, color);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
// Bresenham's algorithm - thx wikpedia
|
||||
void Adafruit_GFX::drawLine(int16_t x0, int16_t y0,
|
||||
int16_t x1, int16_t y1,
|
||||
uint16_t color) {
|
||||
int16_t steep = abs(y1 - y0) > abs(x1 - x0);
|
||||
if (steep) {
|
||||
swap(x0, y0);
|
||||
swap(x1, y1);
|
||||
}
|
||||
|
||||
if (x0 > x1) {
|
||||
swap(x0, x1);
|
||||
swap(y0, y1);
|
||||
}
|
||||
|
||||
int16_t dx, dy;
|
||||
dx = x1 - x0;
|
||||
dy = abs(y1 - y0);
|
||||
|
||||
int16_t err = dx / 2;
|
||||
int16_t ystep;
|
||||
|
||||
if (y0 < y1) {
|
||||
ystep = 1;
|
||||
} else {
|
||||
ystep = -1;
|
||||
}
|
||||
|
||||
for (; x0<=x1; x0++) {
|
||||
if (steep) {
|
||||
drawPixel(y0, x0, color);
|
||||
} else {
|
||||
drawPixel(x0, y0, color);
|
||||
}
|
||||
err -= dy;
|
||||
if (err < 0) {
|
||||
y0 += ystep;
|
||||
err += dx;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
// Draw a rectangle
|
||||
void Adafruit_GFX::drawRect(int16_t x, int16_t y,
|
||||
int16_t w, int16_t h,
|
||||
uint16_t color) {
|
||||
drawFastHLine(x, y, w, color);
|
||||
drawFastHLine(x, y+h-1, w, color);
|
||||
drawFastVLine(x, y, h, color);
|
||||
drawFastVLine(x+w-1, y, h, color);
|
||||
}
|
||||
|
||||
void Adafruit_GFX::drawFastVLine(int16_t x, int16_t y,
|
||||
int16_t h, uint16_t color) {
|
||||
// Update in subclasses if desired!
|
||||
drawLine(x, y, x, y+h-1, color);
|
||||
}
|
||||
|
||||
void Adafruit_GFX::drawFastHLine(int16_t x, int16_t y,
|
||||
int16_t w, uint16_t color) {
|
||||
// Update in subclasses if desired!
|
||||
drawLine(x, y, x+w-1, y, color);
|
||||
}
|
||||
|
||||
void Adafruit_GFX::fillRect(int16_t x, int16_t y, int16_t w, int16_t h,
|
||||
uint16_t color) {
|
||||
// Update in subclasses if desired!
|
||||
for (int16_t i=x; i<x+w; i++) {
|
||||
drawFastVLine(i, y, h, color);
|
||||
}
|
||||
}
|
||||
|
||||
void Adafruit_GFX::fillScreen(uint16_t color) {
|
||||
fillRect(0, 0, _width, _height, color);
|
||||
}
|
||||
|
||||
// Draw a rounded rectangle
|
||||
void Adafruit_GFX::drawRoundRect(int16_t x, int16_t y, int16_t w,
|
||||
int16_t h, int16_t r, uint16_t color) {
|
||||
// smarter version
|
||||
drawFastHLine(x+r , y , w-2*r, color); // Top
|
||||
drawFastHLine(x+r , y+h-1, w-2*r, color); // Bottom
|
||||
drawFastVLine(x , y+r , h-2*r, color); // Left
|
||||
drawFastVLine(x+w-1, y+r , h-2*r, color); // Right
|
||||
// draw four corners
|
||||
drawCircleHelper(x+r , y+r , r, 1, color);
|
||||
drawCircleHelper(x+w-r-1, y+r , r, 2, color);
|
||||
drawCircleHelper(x+w-r-1, y+h-r-1, r, 4, color);
|
||||
drawCircleHelper(x+r , y+h-r-1, r, 8, color);
|
||||
}
|
||||
|
||||
// Fill a rounded rectangle
|
||||
void Adafruit_GFX::fillRoundRect(int16_t x, int16_t y, int16_t w,
|
||||
int16_t h, int16_t r, uint16_t color) {
|
||||
// smarter version
|
||||
fillRect(x+r, y, w-2*r, h, color);
|
||||
|
||||
// draw four corners
|
||||
fillCircleHelper(x+w-r-1, y+r, r, 1, h-2*r-1, color);
|
||||
fillCircleHelper(x+r , y+r, r, 2, h-2*r-1, color);
|
||||
}
|
||||
|
||||
// Draw a triangle
|
||||
void Adafruit_GFX::drawTriangle(int16_t x0, int16_t y0,
|
||||
int16_t x1, int16_t y1,
|
||||
int16_t x2, int16_t y2, uint16_t color) {
|
||||
drawLine(x0, y0, x1, y1, color);
|
||||
drawLine(x1, y1, x2, y2, color);
|
||||
drawLine(x2, y2, x0, y0, color);
|
||||
}
|
||||
|
||||
// Fill a triangle
|
||||
void Adafruit_GFX::fillTriangle ( int16_t x0, int16_t y0,
|
||||
int16_t x1, int16_t y1,
|
||||
int16_t x2, int16_t y2, uint16_t color) {
|
||||
|
||||
int16_t a, b, y, last;
|
||||
|
||||
// Sort coordinates by Y order (y2 >= y1 >= y0)
|
||||
if (y0 > y1) {
|
||||
swap(y0, y1); swap(x0, x1);
|
||||
}
|
||||
if (y1 > y2) {
|
||||
swap(y2, y1); swap(x2, x1);
|
||||
}
|
||||
if (y0 > y1) {
|
||||
swap(y0, y1); swap(x0, x1);
|
||||
}
|
||||
|
||||
if(y0 == y2) { // Handle awkward all-on-same-line case as its own thing
|
||||
a = b = x0;
|
||||
if(x1 < a) a = x1;
|
||||
else if(x1 > b) b = x1;
|
||||
if(x2 < a) a = x2;
|
||||
else if(x2 > b) b = x2;
|
||||
drawFastHLine(a, y0, b-a+1, color);
|
||||
return;
|
||||
}
|
||||
|
||||
int16_t
|
||||
dx01 = x1 - x0,
|
||||
dy01 = y1 - y0,
|
||||
dx02 = x2 - x0,
|
||||
dy02 = y2 - y0,
|
||||
dx12 = x2 - x1,
|
||||
dy12 = y2 - y1;
|
||||
int32_t
|
||||
sa = 0,
|
||||
sb = 0;
|
||||
|
||||
// For upper part of triangle, find scanline crossings for segments
|
||||
// 0-1 and 0-2. If y1=y2 (flat-bottomed triangle), the scanline y1
|
||||
// is included here (and second loop will be skipped, avoiding a /0
|
||||
// error there), otherwise scanline y1 is skipped here and handled
|
||||
// in the second loop...which also avoids a /0 error here if y0=y1
|
||||
// (flat-topped triangle).
|
||||
if(y1 == y2) last = y1; // Include y1 scanline
|
||||
else last = y1-1; // Skip it
|
||||
|
||||
for(y=y0; y<=last; y++) {
|
||||
a = x0 + sa / dy01;
|
||||
b = x0 + sb / dy02;
|
||||
sa += dx01;
|
||||
sb += dx02;
|
||||
/* longhand:
|
||||
a = x0 + (x1 - x0) * (y - y0) / (y1 - y0);
|
||||
b = x0 + (x2 - x0) * (y - y0) / (y2 - y0);
|
||||
*/
|
||||
if(a > b) swap(a,b);
|
||||
drawFastHLine(a, y, b-a+1, color);
|
||||
}
|
||||
|
||||
// For lower part of triangle, find scanline crossings for segments
|
||||
// 0-2 and 1-2. This loop is skipped if y1=y2.
|
||||
sa = dx12 * (y - y1);
|
||||
sb = dx02 * (y - y0);
|
||||
for(; y<=y2; y++) {
|
||||
a = x1 + sa / dy12;
|
||||
b = x0 + sb / dy02;
|
||||
sa += dx12;
|
||||
sb += dx02;
|
||||
/* longhand:
|
||||
a = x1 + (x2 - x1) * (y - y1) / (y2 - y1);
|
||||
b = x0 + (x2 - x0) * (y - y0) / (y2 - y0);
|
||||
*/
|
||||
if(a > b) swap(a,b);
|
||||
drawFastHLine(a, y, b-a+1, color);
|
||||
}
|
||||
}
|
||||
|
||||
void Adafruit_GFX::drawBitmap(int16_t x, int16_t y,
|
||||
const uint8_t *bitmap, int16_t w, int16_t h,
|
||||
uint16_t color) {
|
||||
|
||||
int16_t i, j, byteWidth = (w + 7) / 8;
|
||||
|
||||
for(j=0; j<h; j++) {
|
||||
for(i=0; i<w; i++ ) {
|
||||
if(pgm_read_byte(bitmap + j * byteWidth + i / 8) & (128 >> (i & 7))) {
|
||||
drawPixel(x+i, y+j, color);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
// Draw a 1-bit color bitmap at the specified x, y position from the
|
||||
// provided bitmap buffer (must be PROGMEM memory) using color as the
|
||||
// foreground color and bg as the background color.
|
||||
void Adafruit_GFX::drawBitmap(int16_t x, int16_t y,
|
||||
const uint8_t *bitmap, int16_t w, int16_t h,
|
||||
uint16_t color, uint16_t bg) {
|
||||
|
||||
int16_t i, j, byteWidth = (w + 7) / 8;
|
||||
|
||||
for(j=0; j<h; j++) {
|
||||
for(i=0; i<w; i++ ) {
|
||||
if(pgm_read_byte(bitmap + j * byteWidth + i / 8) & (128 >> (i & 7))) {
|
||||
drawPixel(x+i, y+j, color);
|
||||
}
|
||||
else {
|
||||
drawPixel(x+i, y+j, bg);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
//Draw XBitMap Files (*.xbm), exported from GIMP,
|
||||
//Usage: Export from GIMP to *.xbm, rename *.xbm to *.c and open in editor.
|
||||
//C Array can be directly used with this function
|
||||
void Adafruit_GFX::drawXBitmap(int16_t x, int16_t y,
|
||||
const uint8_t *bitmap, int16_t w, int16_t h,
|
||||
uint16_t color) {
|
||||
|
||||
int16_t i, j, byteWidth = (w + 7) / 8;
|
||||
|
||||
for(j=0; j<h; j++) {
|
||||
for(i=0; i<w; i++ ) {
|
||||
if(pgm_read_byte(bitmap + j * byteWidth + i / 8) & (1 << (i % 8))) {
|
||||
drawPixel(x+i, y+j, color);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
#if ARDUINO >= 100
|
||||
size_t Adafruit_GFX::write(uint8_t c) {
|
||||
#else
|
||||
void Adafruit_GFX::write(uint8_t c) {
|
||||
#endif
|
||||
if (c == '\n') {
|
||||
cursor_y += textsize*8;
|
||||
cursor_x = 0;
|
||||
} else if (c == '\r') {
|
||||
// skip em
|
||||
} else {
|
||||
drawChar(cursor_x, cursor_y, c, textcolor, textbgcolor, textsize);
|
||||
cursor_x += textsize*6;
|
||||
if (wrap && (cursor_x > (_width - textsize*6))) {
|
||||
cursor_y += textsize*8;
|
||||
cursor_x = 0;
|
||||
}
|
||||
}
|
||||
#if ARDUINO >= 100
|
||||
return 1;
|
||||
#endif
|
||||
}
|
||||
|
||||
// Draw a character
|
||||
void Adafruit_GFX::drawChar(int16_t x, int16_t y, unsigned char c,
|
||||
uint16_t color, uint16_t bg, uint8_t size) {
|
||||
|
||||
if((x >= _width) || // Clip right
|
||||
(y >= _height) || // Clip bottom
|
||||
((x + 6 * size - 1) < 0) || // Clip left
|
||||
((y + 8 * size - 1) < 0)) // Clip top
|
||||
return;
|
||||
|
||||
for (int8_t i=0; i<6; i++ ) {
|
||||
uint8_t line;
|
||||
if (i == 5)
|
||||
line = 0x0;
|
||||
else
|
||||
line = pgm_read_byte(font+(c*5)+i);
|
||||
for (int8_t j = 0; j<8; j++) {
|
||||
if (line & 0x1) {
|
||||
if (size == 1) // default size
|
||||
drawPixel(x+i, y+j, color);
|
||||
else { // big size
|
||||
fillRect(x+(i*size), y+(j*size), size, size, color);
|
||||
}
|
||||
} else if (bg != color) {
|
||||
if (size == 1) // default size
|
||||
drawPixel(x+i, y+j, bg);
|
||||
else { // big size
|
||||
fillRect(x+i*size, y+j*size, size, size, bg);
|
||||
}
|
||||
}
|
||||
line >>= 1;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void Adafruit_GFX::setCursor(int16_t x, int16_t y) {
|
||||
cursor_x = x;
|
||||
cursor_y = y;
|
||||
}
|
||||
|
||||
void Adafruit_GFX::setTextSize(uint8_t s) {
|
||||
textsize = (s > 0) ? s : 1;
|
||||
}
|
||||
|
||||
void Adafruit_GFX::setTextColor(uint16_t c) {
|
||||
// For 'transparent' background, we'll set the bg
|
||||
// to the same as fg instead of using a flag
|
||||
textcolor = textbgcolor = c;
|
||||
}
|
||||
|
||||
void Adafruit_GFX::setTextColor(uint16_t c, uint16_t b) {
|
||||
textcolor = c;
|
||||
textbgcolor = b;
|
||||
}
|
||||
|
||||
void Adafruit_GFX::setTextWrap(boolean w) {
|
||||
wrap = w;
|
||||
}
|
||||
|
||||
uint8_t Adafruit_GFX::getRotation(void) const {
|
||||
return rotation;
|
||||
}
|
||||
|
||||
void Adafruit_GFX::setRotation(uint8_t x) {
|
||||
rotation = (x & 3);
|
||||
switch(rotation) {
|
||||
case 0:
|
||||
case 2:
|
||||
_width = WIDTH;
|
||||
_height = HEIGHT;
|
||||
break;
|
||||
case 1:
|
||||
case 3:
|
||||
_width = HEIGHT;
|
||||
_height = WIDTH;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
// Return the size of the display (per current rotation)
|
||||
int16_t Adafruit_GFX::width(void) const {
|
||||
return _width;
|
||||
}
|
||||
|
||||
int16_t Adafruit_GFX::height(void) const {
|
||||
return _height;
|
||||
}
|
||||
|
||||
void Adafruit_GFX::invertDisplay(boolean i) {
|
||||
// Do nothing, must be subclassed if supported
|
||||
}
|
||||
|
||||
|
|
@ -1,90 +0,0 @@
|
|||
#ifndef _ADAFRUIT_GFX_H
|
||||
#define _ADAFRUIT_GFX_H
|
||||
|
||||
#if ARDUINO >= 100
|
||||
#include "Arduino.h"
|
||||
#include "Print.h"
|
||||
#else
|
||||
#include "WProgram.h"
|
||||
#endif
|
||||
|
||||
#define swap(a, b) { int16_t t = a; a = b; b = t; }
|
||||
|
||||
class Adafruit_GFX : public Print {
|
||||
|
||||
public:
|
||||
|
||||
Adafruit_GFX(int16_t w, int16_t h); // Constructor
|
||||
|
||||
// This MUST be defined by the subclass:
|
||||
virtual void drawPixel(int16_t x, int16_t y, uint16_t color) = 0;
|
||||
|
||||
// These MAY be overridden by the subclass to provide device-specific
|
||||
// optimized code. Otherwise 'generic' versions are used.
|
||||
virtual void
|
||||
drawLine(int16_t x0, int16_t y0, int16_t x1, int16_t y1, uint16_t color),
|
||||
drawFastVLine(int16_t x, int16_t y, int16_t h, uint16_t color),
|
||||
drawFastHLine(int16_t x, int16_t y, int16_t w, uint16_t color),
|
||||
drawRect(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t color),
|
||||
fillRect(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t color),
|
||||
fillScreen(uint16_t color),
|
||||
invertDisplay(boolean i);
|
||||
|
||||
// These exist only with Adafruit_GFX (no subclass overrides)
|
||||
void
|
||||
drawCircle(int16_t x0, int16_t y0, int16_t r, uint16_t color),
|
||||
drawCircleHelper(int16_t x0, int16_t y0, int16_t r, uint8_t cornername,
|
||||
uint16_t color),
|
||||
fillCircle(int16_t x0, int16_t y0, int16_t r, uint16_t color),
|
||||
fillCircleHelper(int16_t x0, int16_t y0, int16_t r, uint8_t cornername,
|
||||
int16_t delta, uint16_t color),
|
||||
drawTriangle(int16_t x0, int16_t y0, int16_t x1, int16_t y1,
|
||||
int16_t x2, int16_t y2, uint16_t color),
|
||||
fillTriangle(int16_t x0, int16_t y0, int16_t x1, int16_t y1,
|
||||
int16_t x2, int16_t y2, uint16_t color),
|
||||
drawRoundRect(int16_t x0, int16_t y0, int16_t w, int16_t h,
|
||||
int16_t radius, uint16_t color),
|
||||
fillRoundRect(int16_t x0, int16_t y0, int16_t w, int16_t h,
|
||||
int16_t radius, uint16_t color),
|
||||
drawBitmap(int16_t x, int16_t y, const uint8_t *bitmap,
|
||||
int16_t w, int16_t h, uint16_t color),
|
||||
drawBitmap(int16_t x, int16_t y, const uint8_t *bitmap,
|
||||
int16_t w, int16_t h, uint16_t color, uint16_t bg),
|
||||
drawXBitmap(int16_t x, int16_t y, const uint8_t *bitmap,
|
||||
int16_t w, int16_t h, uint16_t color),
|
||||
drawChar(int16_t x, int16_t y, unsigned char c, uint16_t color,
|
||||
uint16_t bg, uint8_t size),
|
||||
setCursor(int16_t x, int16_t y),
|
||||
setTextColor(uint16_t c),
|
||||
setTextColor(uint16_t c, uint16_t bg),
|
||||
setTextSize(uint8_t s),
|
||||
setTextWrap(boolean w),
|
||||
setRotation(uint8_t r);
|
||||
|
||||
#if ARDUINO >= 100
|
||||
virtual size_t write(uint8_t);
|
||||
#else
|
||||
virtual void write(uint8_t);
|
||||
#endif
|
||||
|
||||
int16_t height(void) const;
|
||||
int16_t width(void) const;
|
||||
|
||||
uint8_t getRotation(void) const;
|
||||
|
||||
protected:
|
||||
const int16_t
|
||||
WIDTH, HEIGHT; // This is the 'raw' display w/h - never changes
|
||||
int16_t
|
||||
_width, _height, // Display w/h as modified by current rotation
|
||||
cursor_x, cursor_y;
|
||||
uint16_t
|
||||
textcolor, textbgcolor;
|
||||
uint8_t
|
||||
textsize,
|
||||
rotation;
|
||||
boolean
|
||||
wrap; // If set, 'wrap' text at right edge of display
|
||||
};
|
||||
|
||||
#endif // _ADAFRUIT_GFX_H
|
||||
|
|
@ -1,773 +0,0 @@
|
|||
/*********************************************************************
|
||||
This is a library for our Monochrome OLEDs based on SSD1306 drivers
|
||||
|
||||
Pick one up today in the adafruit shop!
|
||||
------> http://www.adafruit.com/category/63_98
|
||||
|
||||
These displays use SPI to communicate, 4 or 5 pins are required to
|
||||
interface
|
||||
|
||||
Adafruit invests time and resources providing this open source code,
|
||||
please support Adafruit and open-source hardware by purchasing
|
||||
products from Adafruit!
|
||||
|
||||
Written by Limor Fried/Ladyada for Adafruit Industries.
|
||||
BSD license, check license.txt for more information
|
||||
All text above, and the splash screen below must be included in any redistribution
|
||||
*********************************************************************/
|
||||
|
||||
#include <avr/pgmspace.h>
|
||||
#ifndef __SAM3X8E__
|
||||
#include <util/delay.h>
|
||||
#endif
|
||||
#include <stdlib.h>
|
||||
|
||||
#include <Wire.h>
|
||||
|
||||
#include "Adafruit_GFX.h"
|
||||
#include "Adafruit_SSD1306.h"
|
||||
|
||||
// the memory buffer for the LCD
|
||||
|
||||
static uint8_t buffer[SSD1306_LCDHEIGHT * SSD1306_LCDWIDTH / 8] = {
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
|
||||
0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x80, 0x80, 0xC0, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x80, 0xC0, 0xE0, 0xF0, 0xF8, 0xFC, 0xF8, 0xE0, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80,
|
||||
0x80, 0x80, 0x00, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, 0x80, 0x00, 0xFF,
|
||||
#if (SSD1306_LCDHEIGHT * SSD1306_LCDWIDTH > 96*16)
|
||||
0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x80, 0x80, 0x00, 0x00,
|
||||
0x80, 0xFF, 0xFF, 0x80, 0x80, 0x00, 0x80, 0x80, 0x00, 0x80, 0x80, 0x80, 0x80, 0x00, 0x80, 0x80,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x00, 0x00, 0x8C, 0x8E, 0x84, 0x00, 0x00, 0x80, 0xF8,
|
||||
0xF8, 0xF8, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xE0, 0xE0, 0xC0, 0x80,
|
||||
0x00, 0xE0, 0xFC, 0xFE, 0xFF, 0xFF, 0xFF, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0xFF, 0xC7, 0x01, 0x01,
|
||||
0x01, 0x01, 0x83, 0xFF, 0xFF, 0x00, 0x00, 0x7C, 0xFE, 0xC7, 0x01, 0x01, 0x01, 0x01, 0x83, 0xFF,
|
||||
0xFF, 0xFF, 0x00, 0x38, 0xFE, 0xC7, 0x83, 0x01, 0x01, 0x01, 0x83, 0xC7, 0xFF, 0xFF, 0x00, 0x00,
|
||||
0x01, 0xFF, 0xFF, 0x01, 0x01, 0x00, 0xFF, 0xFF, 0x07, 0x01, 0x01, 0x01, 0x00, 0x00, 0x7F, 0xFF,
|
||||
0x80, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x7F, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x01, 0xFF,
|
||||
0xFF, 0xFF, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x03, 0x0F, 0x3F, 0x7F, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xE7, 0xC7, 0xC7, 0x8F,
|
||||
0x8F, 0x9F, 0xBF, 0xFF, 0xFF, 0xC3, 0xC0, 0xF0, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0xFC, 0xFC,
|
||||
0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xF8, 0xF8, 0xF0, 0xF0, 0xE0, 0xC0, 0x00, 0x01, 0x03, 0x03, 0x03,
|
||||
0x03, 0x03, 0x01, 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x03, 0x03, 0x03, 0x01, 0x01,
|
||||
0x03, 0x01, 0x00, 0x00, 0x00, 0x01, 0x03, 0x03, 0x03, 0x03, 0x01, 0x01, 0x03, 0x03, 0x00, 0x00,
|
||||
0x00, 0x03, 0x03, 0x00, 0x00, 0x00, 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
|
||||
0x03, 0x03, 0x03, 0x03, 0x03, 0x01, 0x00, 0x00, 0x00, 0x01, 0x03, 0x01, 0x00, 0x00, 0x00, 0x03,
|
||||
0x03, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
#if (SSD1306_LCDHEIGHT == 64)
|
||||
0x00, 0x00, 0x00, 0x80, 0xC0, 0xE0, 0xF0, 0xF9, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x3F, 0x1F, 0x0F,
|
||||
0x87, 0xC7, 0xF7, 0xFF, 0xFF, 0x1F, 0x1F, 0x3D, 0xFC, 0xF8, 0xF8, 0xF8, 0xF8, 0x7C, 0x7D, 0xFF,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x7F, 0x3F, 0x0F, 0x07, 0x00, 0x30, 0x30, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0xFE, 0xFE, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xC0, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0xC0, 0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x7F, 0x7F, 0x3F, 0x1F,
|
||||
0x0F, 0x07, 0x1F, 0x7F, 0xFF, 0xFF, 0xF8, 0xF8, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFE, 0xF8, 0xE0,
|
||||
0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0xFE, 0x00, 0x00,
|
||||
0x00, 0xFC, 0xFE, 0xFC, 0x0C, 0x06, 0x06, 0x0E, 0xFC, 0xF8, 0x00, 0x00, 0xF0, 0xF8, 0x1C, 0x0E,
|
||||
0x06, 0x06, 0x06, 0x0C, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0xFE, 0xFE, 0x00, 0x00, 0x00, 0x00, 0xFC,
|
||||
0xFE, 0xFC, 0x00, 0x18, 0x3C, 0x7E, 0x66, 0xE6, 0xCE, 0x84, 0x00, 0x00, 0x06, 0xFF, 0xFF, 0x06,
|
||||
0x06, 0xFC, 0xFE, 0xFC, 0x0C, 0x06, 0x06, 0x06, 0x00, 0x00, 0xFE, 0xFE, 0x00, 0x00, 0xC0, 0xF8,
|
||||
0xFC, 0x4E, 0x46, 0x46, 0x46, 0x4E, 0x7C, 0x78, 0x40, 0x18, 0x3C, 0x76, 0xE6, 0xCE, 0xCC, 0x80,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x01, 0x07, 0x0F, 0x1F, 0x1F, 0x3F, 0x3F, 0x3F, 0x3F, 0x1F, 0x0F, 0x03,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00,
|
||||
0x00, 0x0F, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00, 0x03, 0x07, 0x0E, 0x0C,
|
||||
0x18, 0x18, 0x0C, 0x06, 0x0F, 0x0F, 0x0F, 0x00, 0x00, 0x01, 0x0F, 0x0E, 0x0C, 0x18, 0x0C, 0x0F,
|
||||
0x07, 0x01, 0x00, 0x04, 0x0E, 0x0C, 0x18, 0x0C, 0x0F, 0x07, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00,
|
||||
0x00, 0x0F, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x07,
|
||||
0x07, 0x0C, 0x0C, 0x18, 0x1C, 0x0C, 0x06, 0x06, 0x00, 0x04, 0x0E, 0x0C, 0x18, 0x0C, 0x0F, 0x07,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
|
||||
#endif
|
||||
#endif
|
||||
};
|
||||
|
||||
|
||||
|
||||
// the most basic function, set a single pixel
|
||||
void Adafruit_SSD1306::drawPixel(int16_t x, int16_t y, uint16_t color) {
|
||||
if ((x < 0) || (x >= width()) || (y < 0) || (y >= height()))
|
||||
return;
|
||||
|
||||
// check rotation, move pixel around if necessary
|
||||
switch (getRotation()) {
|
||||
case 1:
|
||||
swap(x, y);
|
||||
x = WIDTH - x - 1;
|
||||
break;
|
||||
case 2:
|
||||
x = WIDTH - x - 1;
|
||||
y = HEIGHT - y - 1;
|
||||
break;
|
||||
case 3:
|
||||
swap(x, y);
|
||||
y = HEIGHT - y - 1;
|
||||
break;
|
||||
}
|
||||
|
||||
// x is which column
|
||||
switch (color)
|
||||
{
|
||||
case WHITE: buffer[x+ (y/8)*SSD1306_LCDWIDTH] |= (1 << (y&7)); break;
|
||||
case BLACK: buffer[x+ (y/8)*SSD1306_LCDWIDTH] &= ~(1 << (y&7)); break;
|
||||
case INVERSE: buffer[x+ (y/8)*SSD1306_LCDWIDTH] ^= (1 << (y&7)); break;
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
Adafruit_SSD1306::Adafruit_SSD1306(int8_t SID, int8_t SCLK, int8_t DC, int8_t RST, int8_t CS) : Adafruit_GFX(SSD1306_LCDWIDTH, SSD1306_LCDHEIGHT) {
|
||||
cs = CS;
|
||||
rst = RST;
|
||||
dc = DC;
|
||||
sclk = SCLK;
|
||||
sid = SID;
|
||||
hwSPI = false;
|
||||
}
|
||||
|
||||
// constructor for hardware SPI - we indicate DataCommand, ChipSelect, Reset
|
||||
Adafruit_SSD1306::Adafruit_SSD1306(int8_t DC, int8_t RST, int8_t CS) : Adafruit_GFX(SSD1306_LCDWIDTH, SSD1306_LCDHEIGHT) {
|
||||
dc = DC;
|
||||
rst = RST;
|
||||
cs = CS;
|
||||
hwSPI = true;
|
||||
}
|
||||
|
||||
// initializer for I2C - we only indicate the reset pin!
|
||||
Adafruit_SSD1306::Adafruit_SSD1306(int8_t reset) :
|
||||
Adafruit_GFX(SSD1306_LCDWIDTH, SSD1306_LCDHEIGHT) {
|
||||
sclk = dc = cs = sid = -1;
|
||||
rst = reset;
|
||||
}
|
||||
|
||||
|
||||
void Adafruit_SSD1306::begin(uint8_t vccstate, uint8_t i2caddr, bool reset) {
|
||||
_vccstate = vccstate;
|
||||
_i2caddr = i2caddr;
|
||||
|
||||
// set pin directions
|
||||
if (sid != -1){
|
||||
pinMode(dc, OUTPUT);
|
||||
pinMode(cs, OUTPUT);
|
||||
csport = portOutputRegister(digitalPinToPort(cs));
|
||||
cspinmask = digitalPinToBitMask(cs);
|
||||
dcport = portOutputRegister(digitalPinToPort(dc));
|
||||
dcpinmask = digitalPinToBitMask(dc);
|
||||
if (!hwSPI){
|
||||
// set pins for software-SPI
|
||||
pinMode(sid, OUTPUT);
|
||||
pinMode(sclk, OUTPUT);
|
||||
clkport = portOutputRegister(digitalPinToPort(sclk));
|
||||
clkpinmask = digitalPinToBitMask(sclk);
|
||||
mosiport = portOutputRegister(digitalPinToPort(sid));
|
||||
mosipinmask = digitalPinToBitMask(sid);
|
||||
}
|
||||
if (hwSPI){
|
||||
SPI.begin ();
|
||||
#ifdef __SAM3X8E__
|
||||
SPI.setClockDivider (9); // 9.3 MHz
|
||||
#else
|
||||
SPI.setClockDivider (SPI_CLOCK_DIV2); // 8 MHz
|
||||
#endif
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
// I2C Init
|
||||
Wire.begin();
|
||||
#ifdef __SAM3X8E__
|
||||
// Force 400 KHz I2C, rawr! (Uses pins 20, 21 for SDA, SCL)
|
||||
TWI1->TWI_CWGR = 0;
|
||||
TWI1->TWI_CWGR = ((VARIANT_MCK / (2 * 400000)) - 4) * 0x101;
|
||||
#else
|
||||
TWBR = 10; //Force 400 Khz on AVR
|
||||
#endif
|
||||
}
|
||||
|
||||
if (reset) {
|
||||
// Setup reset pin direction (used by both SPI and I2C)
|
||||
pinMode(rst, OUTPUT);
|
||||
digitalWrite(rst, HIGH);
|
||||
// VDD (3.3V) goes high at start, lets just chill for a ms
|
||||
delay(1);
|
||||
// bring reset low
|
||||
digitalWrite(rst, LOW);
|
||||
// wait 10ms
|
||||
delay(10);
|
||||
// bring out of reset
|
||||
digitalWrite(rst, HIGH);
|
||||
// turn on VCC (9V?)
|
||||
}
|
||||
|
||||
#if defined SSD1306_128_32
|
||||
// Init sequence for 128x32 OLED module
|
||||
ssd1306_command(SSD1306_DISPLAYOFF); // 0xAE
|
||||
ssd1306_command(SSD1306_SETDISPLAYCLOCKDIV); // 0xD5
|
||||
ssd1306_command(0x80); // the suggested ratio 0x80
|
||||
ssd1306_command(SSD1306_SETMULTIPLEX); // 0xA8
|
||||
ssd1306_command(0x1F);
|
||||
ssd1306_command(SSD1306_SETDISPLAYOFFSET); // 0xD3
|
||||
ssd1306_command(0x0); // no offset
|
||||
ssd1306_command(SSD1306_SETSTARTLINE | 0x0); // line #0
|
||||
ssd1306_command(SSD1306_CHARGEPUMP); // 0x8D
|
||||
if (vccstate == SSD1306_EXTERNALVCC)
|
||||
{ ssd1306_command(0x10); }
|
||||
else
|
||||
{ ssd1306_command(0x14); }
|
||||
ssd1306_command(SSD1306_MEMORYMODE); // 0x20
|
||||
ssd1306_command(0x00); // 0x0 act like ks0108
|
||||
ssd1306_command(SSD1306_SEGREMAP | 0x1);
|
||||
ssd1306_command(SSD1306_COMSCANDEC);
|
||||
ssd1306_command(SSD1306_SETCOMPINS); // 0xDA
|
||||
ssd1306_command(SSD1306_SETCOMPINS_V); //Speeduino modified. Value 0x02 is used for original adafruit displays. 0x012 is used for some others //ssd1306_command(0x012);//ssd1306_command(0x02);
|
||||
ssd1306_command(SSD1306_SETCONTRAST); // 0x81
|
||||
ssd1306_command(0x8F);
|
||||
ssd1306_command(SSD1306_SETPRECHARGE); // 0xd9
|
||||
if (vccstate == SSD1306_EXTERNALVCC)
|
||||
{ ssd1306_command(0x22); }
|
||||
else
|
||||
{ ssd1306_command(0xF1); }
|
||||
ssd1306_command(SSD1306_SETVCOMDETECT); // 0xDB
|
||||
ssd1306_command(0x40);
|
||||
ssd1306_command(SSD1306_DISPLAYALLON_RESUME); // 0xA4
|
||||
ssd1306_command(SSD1306_NORMALDISPLAY); // 0xA6
|
||||
#endif
|
||||
|
||||
#if defined SSD1306_128_64
|
||||
// Init sequence for 128x64 OLED module
|
||||
ssd1306_command(SSD1306_DISPLAYOFF); // 0xAE
|
||||
ssd1306_command(SSD1306_SETDISPLAYCLOCKDIV); // 0xD5
|
||||
ssd1306_command(0x80); // the suggested ratio 0x80
|
||||
ssd1306_command(SSD1306_SETMULTIPLEX); // 0xA8
|
||||
ssd1306_command(0x3F);
|
||||
ssd1306_command(SSD1306_SETDISPLAYOFFSET); // 0xD3
|
||||
ssd1306_command(0x0); // no offset
|
||||
ssd1306_command(SSD1306_SETSTARTLINE | 0x0); // line #0
|
||||
ssd1306_command(SSD1306_CHARGEPUMP); // 0x8D
|
||||
if (vccstate == SSD1306_EXTERNALVCC)
|
||||
{ ssd1306_command(0x10); }
|
||||
else
|
||||
{ ssd1306_command(0x14); }
|
||||
ssd1306_command(SSD1306_MEMORYMODE); // 0x20
|
||||
ssd1306_command(0x00); // 0x0 act like ks0108
|
||||
ssd1306_command(SSD1306_SEGREMAP | 0x1);
|
||||
ssd1306_command(SSD1306_COMSCANDEC);
|
||||
ssd1306_command(SSD1306_SETCOMPINS); // 0xDA
|
||||
ssd1306_command(SSD1306_SETCOMPINS_V);
|
||||
ssd1306_command(SSD1306_SETCONTRAST); // 0x81
|
||||
if (vccstate == SSD1306_EXTERNALVCC)
|
||||
{ ssd1306_command(0x9F); }
|
||||
else
|
||||
{ ssd1306_command(0xCF); }
|
||||
ssd1306_command(SSD1306_SETPRECHARGE); // 0xd9
|
||||
if (vccstate == SSD1306_EXTERNALVCC)
|
||||
{ ssd1306_command(0x22); }
|
||||
else
|
||||
{ ssd1306_command(0xF1); }
|
||||
ssd1306_command(SSD1306_SETVCOMDETECT); // 0xDB
|
||||
ssd1306_command(0x40);
|
||||
ssd1306_command(SSD1306_DISPLAYALLON_RESUME); // 0xA4
|
||||
ssd1306_command(SSD1306_NORMALDISPLAY); // 0xA6
|
||||
#endif
|
||||
|
||||
#if defined SSD1306_96_16
|
||||
// Init sequence for 96x16 OLED module
|
||||
ssd1306_command(SSD1306_DISPLAYOFF); // 0xAE
|
||||
ssd1306_command(SSD1306_SETDISPLAYCLOCKDIV); // 0xD5
|
||||
ssd1306_command(0x80); // the suggested ratio 0x80
|
||||
ssd1306_command(SSD1306_SETMULTIPLEX); // 0xA8
|
||||
ssd1306_command(0x0F);
|
||||
ssd1306_command(SSD1306_SETDISPLAYOFFSET); // 0xD3
|
||||
ssd1306_command(0x00); // no offset
|
||||
ssd1306_command(SSD1306_SETSTARTLINE | 0x0); // line #0
|
||||
ssd1306_command(SSD1306_CHARGEPUMP); // 0x8D
|
||||
if (vccstate == SSD1306_EXTERNALVCC)
|
||||
{ ssd1306_command(0x10); }
|
||||
else
|
||||
{ ssd1306_command(0x14); }
|
||||
ssd1306_command(SSD1306_MEMORYMODE); // 0x20
|
||||
ssd1306_command(0x00); // 0x0 act like ks0108
|
||||
ssd1306_command(SSD1306_SEGREMAP | 0x1);
|
||||
ssd1306_command(SSD1306_COMSCANDEC);
|
||||
ssd1306_command(SSD1306_SETCOMPINS); // 0xDA
|
||||
ssd1306_command(0x2); //ada x12
|
||||
ssd1306_command(SSD1306_SETCONTRAST); // 0x81
|
||||
if (vccstate == SSD1306_EXTERNALVCC)
|
||||
{ ssd1306_command(0x10); }
|
||||
else
|
||||
{ ssd1306_command(0xAF); }
|
||||
ssd1306_command(SSD1306_SETPRECHARGE); // 0xd9
|
||||
if (vccstate == SSD1306_EXTERNALVCC)
|
||||
{ ssd1306_command(0x22); }
|
||||
else
|
||||
{ ssd1306_command(0xF1); }
|
||||
ssd1306_command(SSD1306_SETVCOMDETECT); // 0xDB
|
||||
ssd1306_command(0x40);
|
||||
ssd1306_command(SSD1306_DISPLAYALLON_RESUME); // 0xA4
|
||||
ssd1306_command(SSD1306_NORMALDISPLAY); // 0xA6
|
||||
#endif
|
||||
|
||||
ssd1306_command(SSD1306_DISPLAYON);//--turn on oled panel
|
||||
}
|
||||
|
||||
|
||||
void Adafruit_SSD1306::invertDisplay(uint8_t i) {
|
||||
if (i) {
|
||||
ssd1306_command(SSD1306_INVERTDISPLAY);
|
||||
} else {
|
||||
ssd1306_command(SSD1306_NORMALDISPLAY);
|
||||
}
|
||||
}
|
||||
|
||||
void Adafruit_SSD1306::ssd1306_command(uint8_t c) {
|
||||
if (sid != -1)
|
||||
{
|
||||
// SPI
|
||||
//digitalWrite(cs, HIGH);
|
||||
*csport |= cspinmask;
|
||||
//digitalWrite(dc, LOW);
|
||||
*dcport &= ~dcpinmask;
|
||||
//digitalWrite(cs, LOW);
|
||||
*csport &= ~cspinmask;
|
||||
fastSPIwrite(c);
|
||||
//digitalWrite(cs, HIGH);
|
||||
*csport |= cspinmask;
|
||||
}
|
||||
else
|
||||
{
|
||||
// I2C
|
||||
uint8_t control = 0x00; // Co = 0, D/C = 0
|
||||
Wire.beginTransmission(_i2caddr);
|
||||
WIRE_WRITE(control);
|
||||
WIRE_WRITE(c);
|
||||
Wire.endTransmission();
|
||||
}
|
||||
}
|
||||
|
||||
// startscrollright
|
||||
// Activate a right handed scroll for rows start through stop
|
||||
// Hint, the display is 16 rows tall. To scroll the whole display, run:
|
||||
// display.scrollright(0x00, 0x0F)
|
||||
void Adafruit_SSD1306::startscrollright(uint8_t start, uint8_t stop){
|
||||
ssd1306_command(SSD1306_RIGHT_HORIZONTAL_SCROLL);
|
||||
ssd1306_command(0X00);
|
||||
ssd1306_command(start);
|
||||
ssd1306_command(0X00);
|
||||
ssd1306_command(stop);
|
||||
ssd1306_command(0X00);
|
||||
ssd1306_command(0XFF);
|
||||
ssd1306_command(SSD1306_ACTIVATE_SCROLL);
|
||||
}
|
||||
|
||||
// startscrollleft
|
||||
// Activate a right handed scroll for rows start through stop
|
||||
// Hint, the display is 16 rows tall. To scroll the whole display, run:
|
||||
// display.scrollright(0x00, 0x0F)
|
||||
void Adafruit_SSD1306::startscrollleft(uint8_t start, uint8_t stop){
|
||||
ssd1306_command(SSD1306_LEFT_HORIZONTAL_SCROLL);
|
||||
ssd1306_command(0X00);
|
||||
ssd1306_command(start);
|
||||
ssd1306_command(0X00);
|
||||
ssd1306_command(stop);
|
||||
ssd1306_command(0X00);
|
||||
ssd1306_command(0XFF);
|
||||
ssd1306_command(SSD1306_ACTIVATE_SCROLL);
|
||||
}
|
||||
|
||||
// startscrolldiagright
|
||||
// Activate a diagonal scroll for rows start through stop
|
||||
// Hint, the display is 16 rows tall. To scroll the whole display, run:
|
||||
// display.scrollright(0x00, 0x0F)
|
||||
void Adafruit_SSD1306::startscrolldiagright(uint8_t start, uint8_t stop){
|
||||
ssd1306_command(SSD1306_SET_VERTICAL_SCROLL_AREA);
|
||||
ssd1306_command(0X00);
|
||||
ssd1306_command(SSD1306_LCDHEIGHT);
|
||||
ssd1306_command(SSD1306_VERTICAL_AND_RIGHT_HORIZONTAL_SCROLL);
|
||||
ssd1306_command(0X00);
|
||||
ssd1306_command(start);
|
||||
ssd1306_command(0X00);
|
||||
ssd1306_command(stop);
|
||||
ssd1306_command(0X01);
|
||||
ssd1306_command(SSD1306_ACTIVATE_SCROLL);
|
||||
}
|
||||
|
||||
// startscrolldiagleft
|
||||
// Activate a diagonal scroll for rows start through stop
|
||||
// Hint, the display is 16 rows tall. To scroll the whole display, run:
|
||||
// display.scrollright(0x00, 0x0F)
|
||||
void Adafruit_SSD1306::startscrolldiagleft(uint8_t start, uint8_t stop){
|
||||
ssd1306_command(SSD1306_SET_VERTICAL_SCROLL_AREA);
|
||||
ssd1306_command(0X00);
|
||||
ssd1306_command(SSD1306_LCDHEIGHT);
|
||||
ssd1306_command(SSD1306_VERTICAL_AND_LEFT_HORIZONTAL_SCROLL);
|
||||
ssd1306_command(0X00);
|
||||
ssd1306_command(start);
|
||||
ssd1306_command(0X00);
|
||||
ssd1306_command(stop);
|
||||
ssd1306_command(0X01);
|
||||
ssd1306_command(SSD1306_ACTIVATE_SCROLL);
|
||||
}
|
||||
|
||||
void Adafruit_SSD1306::stopscroll(void){
|
||||
ssd1306_command(SSD1306_DEACTIVATE_SCROLL);
|
||||
}
|
||||
|
||||
// Dim the display
|
||||
// dim = true: display is dimmed
|
||||
// dim = false: display is normal
|
||||
void Adafruit_SSD1306::dim(boolean dim) {
|
||||
uint8_t contrast;
|
||||
|
||||
if (dim) {
|
||||
contrast = 0; // Dimmed display
|
||||
} else {
|
||||
if (_vccstate == SSD1306_EXTERNALVCC) {
|
||||
contrast = 0x9F;
|
||||
} else {
|
||||
contrast = 0xCF;
|
||||
}
|
||||
}
|
||||
// the range of contrast to too small to be really useful
|
||||
// it is useful to dim the display
|
||||
ssd1306_command(SSD1306_SETCONTRAST);
|
||||
ssd1306_command(contrast);
|
||||
}
|
||||
|
||||
void Adafruit_SSD1306::ssd1306_data(uint8_t c) {
|
||||
if (sid != -1)
|
||||
{
|
||||
// SPI
|
||||
//digitalWrite(cs, HIGH);
|
||||
*csport |= cspinmask;
|
||||
//digitalWrite(dc, HIGH);
|
||||
*dcport |= dcpinmask;
|
||||
//digitalWrite(cs, LOW);
|
||||
*csport &= ~cspinmask;
|
||||
fastSPIwrite(c);
|
||||
//digitalWrite(cs, HIGH);
|
||||
*csport |= cspinmask;
|
||||
}
|
||||
else
|
||||
{
|
||||
// I2C
|
||||
uint8_t control = 0x40; // Co = 0, D/C = 1
|
||||
Wire.beginTransmission(_i2caddr);
|
||||
WIRE_WRITE(control);
|
||||
WIRE_WRITE(c);
|
||||
Wire.endTransmission();
|
||||
}
|
||||
}
|
||||
|
||||
void Adafruit_SSD1306::display(void) {
|
||||
ssd1306_command(SSD1306_COLUMNADDR);
|
||||
ssd1306_command(0); // Column start address (0 = reset)
|
||||
ssd1306_command(SSD1306_LCDWIDTH-1); // Column end address (127 = reset)
|
||||
|
||||
ssd1306_command(SSD1306_PAGEADDR);
|
||||
ssd1306_command(0); // Page start address (0 = reset)
|
||||
#if SSD1306_LCDHEIGHT == 64
|
||||
ssd1306_command(7); // Page end address
|
||||
#endif
|
||||
#if SSD1306_LCDHEIGHT == 32
|
||||
ssd1306_command(3); // Page end address
|
||||
#endif
|
||||
#if SSD1306_LCDHEIGHT == 16
|
||||
ssd1306_command(1); // Page end address
|
||||
#endif
|
||||
|
||||
if (sid != -1)
|
||||
{
|
||||
// SPI
|
||||
*csport |= cspinmask;
|
||||
*dcport |= dcpinmask;
|
||||
*csport &= ~cspinmask;
|
||||
|
||||
for (uint16_t i=0; i<(SSD1306_LCDWIDTH*SSD1306_LCDHEIGHT/8); i++) {
|
||||
fastSPIwrite(buffer[i]);
|
||||
//ssd1306_data(buffer[i]);
|
||||
}
|
||||
*csport |= cspinmask;
|
||||
}
|
||||
else
|
||||
{
|
||||
// save I2C bitrate
|
||||
#ifndef __SAM3X8E__
|
||||
uint8_t twbrbackup = TWBR;
|
||||
TWBR = 12; // upgrade to 400KHz!
|
||||
#endif
|
||||
|
||||
//Serial.println(TWBR, DEC);
|
||||
//Serial.println(TWSR & 0x3, DEC);
|
||||
|
||||
// I2C
|
||||
for (uint16_t i=0; i<(SSD1306_LCDWIDTH*SSD1306_LCDHEIGHT/8); i++) {
|
||||
// send a bunch of data in one xmission
|
||||
Wire.beginTransmission(_i2caddr);
|
||||
WIRE_WRITE(0x40);
|
||||
for (uint8_t x=0; x<16; x++) {
|
||||
WIRE_WRITE(buffer[i]);
|
||||
i++;
|
||||
}
|
||||
i--;
|
||||
Wire.endTransmission();
|
||||
}
|
||||
#ifndef __SAM3X8E__
|
||||
TWBR = twbrbackup;
|
||||
#endif
|
||||
}
|
||||
}
|
||||
|
||||
// clear everything
|
||||
void Adafruit_SSD1306::clearDisplay(void) {
|
||||
memset(buffer, 0, (SSD1306_LCDWIDTH*SSD1306_LCDHEIGHT/8));
|
||||
}
|
||||
|
||||
|
||||
inline void Adafruit_SSD1306::fastSPIwrite(uint8_t d) {
|
||||
|
||||
if(hwSPI) {
|
||||
(void)SPI.transfer(d);
|
||||
} else {
|
||||
for(uint8_t bit = 0x80; bit; bit >>= 1) {
|
||||
*clkport &= ~clkpinmask;
|
||||
if(d & bit) *mosiport |= mosipinmask;
|
||||
else *mosiport &= ~mosipinmask;
|
||||
*clkport |= clkpinmask;
|
||||
}
|
||||
}
|
||||
//*csport |= cspinmask;
|
||||
}
|
||||
|
||||
void Adafruit_SSD1306::drawFastHLine(int16_t x, int16_t y, int16_t w, uint16_t color) {
|
||||
boolean bSwap = false;
|
||||
switch(rotation) {
|
||||
case 0:
|
||||
// 0 degree rotation, do nothing
|
||||
break;
|
||||
case 1:
|
||||
// 90 degree rotation, swap x & y for rotation, then invert x
|
||||
bSwap = true;
|
||||
swap(x, y);
|
||||
x = WIDTH - x - 1;
|
||||
break;
|
||||
case 2:
|
||||
// 180 degree rotation, invert x and y - then shift y around for height.
|
||||
x = WIDTH - x - 1;
|
||||
y = HEIGHT - y - 1;
|
||||
x -= (w-1);
|
||||
break;
|
||||
case 3:
|
||||
// 270 degree rotation, swap x & y for rotation, then invert y and adjust y for w (not to become h)
|
||||
bSwap = true;
|
||||
swap(x, y);
|
||||
y = HEIGHT - y - 1;
|
||||
y -= (w-1);
|
||||
break;
|
||||
}
|
||||
|
||||
if(bSwap) {
|
||||
drawFastVLineInternal(x, y, w, color);
|
||||
} else {
|
||||
drawFastHLineInternal(x, y, w, color);
|
||||
}
|
||||
}
|
||||
|
||||
void Adafruit_SSD1306::drawFastHLineInternal(int16_t x, int16_t y, int16_t w, uint16_t color) {
|
||||
// Do bounds/limit checks
|
||||
if(y < 0 || y >= HEIGHT) { return; }
|
||||
|
||||
// make sure we don't try to draw below 0
|
||||
if(x < 0) {
|
||||
w += x;
|
||||
x = 0;
|
||||
}
|
||||
|
||||
// make sure we don't go off the edge of the display
|
||||
if( (x + w) > WIDTH) {
|
||||
w = (WIDTH - x);
|
||||
}
|
||||
|
||||
// if our width is now negative, punt
|
||||
if(w <= 0) { return; }
|
||||
|
||||
// set up the pointer for movement through the buffer
|
||||
register uint8_t *pBuf = buffer;
|
||||
// adjust the buffer pointer for the current row
|
||||
pBuf += ((y/8) * SSD1306_LCDWIDTH);
|
||||
// and offset x columns in
|
||||
pBuf += x;
|
||||
|
||||
register uint8_t mask = 1 << (y&7);
|
||||
|
||||
switch (color)
|
||||
{
|
||||
case WHITE: while(w--) { *pBuf++ |= mask; }; break;
|
||||
case BLACK: mask = ~mask; while(w--) { *pBuf++ &= mask; }; break;
|
||||
case INVERSE: while(w--) { *pBuf++ ^= mask; }; break;
|
||||
}
|
||||
}
|
||||
|
||||
void Adafruit_SSD1306::drawFastVLine(int16_t x, int16_t y, int16_t h, uint16_t color) {
|
||||
bool bSwap = false;
|
||||
switch(rotation) {
|
||||
case 0:
|
||||
break;
|
||||
case 1:
|
||||
// 90 degree rotation, swap x & y for rotation, then invert x and adjust x for h (now to become w)
|
||||
bSwap = true;
|
||||
swap(x, y);
|
||||
x = WIDTH - x - 1;
|
||||
x -= (h-1);
|
||||
break;
|
||||
case 2:
|
||||
// 180 degree rotation, invert x and y - then shift y around for height.
|
||||
x = WIDTH - x - 1;
|
||||
y = HEIGHT - y - 1;
|
||||
y -= (h-1);
|
||||
break;
|
||||
case 3:
|
||||
// 270 degree rotation, swap x & y for rotation, then invert y
|
||||
bSwap = true;
|
||||
swap(x, y);
|
||||
y = HEIGHT - y - 1;
|
||||
break;
|
||||
}
|
||||
|
||||
if(bSwap) {
|
||||
drawFastHLineInternal(x, y, h, color);
|
||||
} else {
|
||||
drawFastVLineInternal(x, y, h, color);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
void Adafruit_SSD1306::drawFastVLineInternal(int16_t x, int16_t __y, int16_t __h, uint16_t color) {
|
||||
|
||||
// do nothing if we're off the left or right side of the screen
|
||||
if(x < 0 || x >= WIDTH) { return; }
|
||||
|
||||
// make sure we don't try to draw below 0
|
||||
if(__y < 0) {
|
||||
// __y is negative, this will subtract enough from __h to account for __y being 0
|
||||
__h += __y;
|
||||
__y = 0;
|
||||
|
||||
}
|
||||
|
||||
// make sure we don't go past the height of the display
|
||||
if( (__y + __h) > HEIGHT) {
|
||||
__h = (HEIGHT - __y);
|
||||
}
|
||||
|
||||
// if our height is now negative, punt
|
||||
if(__h <= 0) {
|
||||
return;
|
||||
}
|
||||
|
||||
// this display doesn't need ints for coordinates, use local byte registers for faster juggling
|
||||
register uint8_t y = __y;
|
||||
register uint8_t h = __h;
|
||||
|
||||
|
||||
// set up the pointer for fast movement through the buffer
|
||||
register uint8_t *pBuf = buffer;
|
||||
// adjust the buffer pointer for the current row
|
||||
pBuf += ((y/8) * SSD1306_LCDWIDTH);
|
||||
// and offset x columns in
|
||||
pBuf += x;
|
||||
|
||||
// do the first partial byte, if necessary - this requires some masking
|
||||
register uint8_t mod = (y&7);
|
||||
if(mod) {
|
||||
// mask off the high n bits we want to set
|
||||
mod = 8-mod;
|
||||
|
||||
// note - lookup table results in a nearly 10% performance improvement in fill* functions
|
||||
// register uint8_t mask = ~(0xFF >> (mod));
|
||||
static uint8_t premask[8] = {0x00, 0x80, 0xC0, 0xE0, 0xF0, 0xF8, 0xFC, 0xFE };
|
||||
register uint8_t mask = premask[mod];
|
||||
|
||||
// adjust the mask if we're not going to reach the end of this byte
|
||||
if( h < mod) {
|
||||
mask &= (0XFF >> (mod-h));
|
||||
}
|
||||
|
||||
switch (color)
|
||||
{
|
||||
case WHITE: *pBuf |= mask; break;
|
||||
case BLACK: *pBuf &= ~mask; break;
|
||||
case INVERSE: *pBuf ^= mask; break;
|
||||
}
|
||||
|
||||
// fast exit if we're done here!
|
||||
if(h<mod) { return; }
|
||||
|
||||
h -= mod;
|
||||
|
||||
pBuf += SSD1306_LCDWIDTH;
|
||||
}
|
||||
|
||||
|
||||
// write solid bytes while we can - effectively doing 8 rows at a time
|
||||
if(h >= 8) {
|
||||
if (color == INVERSE) { // separate copy of the code so we don't impact performance of the black/white write version with an extra comparison per loop
|
||||
do {
|
||||
*pBuf=~(*pBuf);
|
||||
|
||||
// adjust the buffer forward 8 rows worth of data
|
||||
pBuf += SSD1306_LCDWIDTH;
|
||||
|
||||
// adjust h & y (there's got to be a faster way for me to do this, but this should still help a fair bit for now)
|
||||
h -= 8;
|
||||
} while(h >= 8);
|
||||
}
|
||||
else {
|
||||
// store a local value to work with
|
||||
register uint8_t val = (color == WHITE) ? 255 : 0;
|
||||
|
||||
do {
|
||||
// write our value in
|
||||
*pBuf = val;
|
||||
|
||||
// adjust the buffer forward 8 rows worth of data
|
||||
pBuf += SSD1306_LCDWIDTH;
|
||||
|
||||
// adjust h & y (there's got to be a faster way for me to do this, but this should still help a fair bit for now)
|
||||
h -= 8;
|
||||
} while(h >= 8);
|
||||
}
|
||||
}
|
||||
|
||||
// now do the final partial byte, if necessary
|
||||
if(h) {
|
||||
mod = h & 7;
|
||||
// this time we want to mask the low bits of the byte, vs the high bits we did above
|
||||
// register uint8_t mask = (1 << mod) - 1;
|
||||
// note - lookup table results in a nearly 10% performance improvement in fill* functions
|
||||
static uint8_t postmask[8] = {0x00, 0x01, 0x03, 0x07, 0x0F, 0x1F, 0x3F, 0x7F };
|
||||
register uint8_t mask = postmask[mod];
|
||||
switch (color)
|
||||
{
|
||||
case WHITE: *pBuf |= mask; break;
|
||||
case BLACK: *pBuf &= ~mask; break;
|
||||
case INVERSE: *pBuf ^= mask; break;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -1,172 +0,0 @@
|
|||
/*********************************************************************
|
||||
This is a library for our Monochrome OLEDs based on SSD1306 drivers
|
||||
|
||||
Pick one up today in the adafruit shop!
|
||||
------> http://www.adafruit.com/category/63_98
|
||||
|
||||
These displays use SPI to communicate, 4 or 5 pins are required to
|
||||
interface
|
||||
|
||||
Adafruit invests time and resources providing this open source code,
|
||||
please support Adafruit and open-source hardware by purchasing
|
||||
products from Adafruit!
|
||||
|
||||
Written by Limor Fried/Ladyada for Adafruit Industries.
|
||||
BSD license, check license.txt for more information
|
||||
All text above, and the splash screen must be included in any redistribution
|
||||
*********************************************************************/
|
||||
|
||||
#if ARDUINO >= 100
|
||||
#include "Arduino.h"
|
||||
#define WIRE_WRITE Wire.write
|
||||
#else
|
||||
#include "WProgram.h"
|
||||
#define WIRE_WRITE Wire.send
|
||||
#endif
|
||||
|
||||
#ifdef __SAM3X8E__
|
||||
typedef volatile RwReg PortReg;
|
||||
typedef uint32_t PortMask;
|
||||
#else
|
||||
typedef volatile uint8_t PortReg;
|
||||
typedef uint8_t PortMask;
|
||||
#endif
|
||||
|
||||
#include <SPI.h>
|
||||
#include "Adafruit_GFX.h"
|
||||
|
||||
#define BLACK 0
|
||||
#define WHITE 1
|
||||
#define INVERSE 2
|
||||
|
||||
#define SSD1306_I2C_ADDRESS 0x3C // 011110+SA0+RW - 0x3C or 0x3D
|
||||
// Address for 128x32 is 0x3C
|
||||
// Address for 128x64 is 0x3D (default) or 0x3C (if SA0 is grounded)
|
||||
|
||||
/*=========================================================================
|
||||
SSD1306 Displays
|
||||
-----------------------------------------------------------------------
|
||||
The driver is used in multiple displays (128x64, 128x32, etc.).
|
||||
Select the appropriate display below to create an appropriately
|
||||
sized framebuffer, etc.
|
||||
|
||||
SSD1306_128_64 128x64 pixel display
|
||||
|
||||
SSD1306_128_32 128x32 pixel display
|
||||
|
||||
SSD1306_96_16
|
||||
|
||||
-----------------------------------------------------------------------*/
|
||||
// #define SSD1306_128_64
|
||||
#define SSD1306_128_32
|
||||
// #define SSD1306_96_16
|
||||
/*=========================================================================*/
|
||||
|
||||
#if defined SSD1306_128_64 && defined SSD1306_128_32
|
||||
#error "Only one SSD1306 display can be specified at once in SSD1306.h"
|
||||
#endif
|
||||
#if !defined SSD1306_128_64 && !defined SSD1306_128_32 && !defined SSD1306_96_16
|
||||
#error "At least one SSD1306 display must be specified in SSD1306.h"
|
||||
#endif
|
||||
|
||||
#if defined SSD1306_128_64
|
||||
#define SSD1306_LCDWIDTH 128
|
||||
#define SSD1306_LCDHEIGHT 64
|
||||
#endif
|
||||
#if defined SSD1306_128_32
|
||||
#define SSD1306_LCDWIDTH 128
|
||||
#define SSD1306_LCDHEIGHT 32
|
||||
#endif
|
||||
#if defined SSD1306_96_16
|
||||
#define SSD1306_LCDWIDTH 96
|
||||
#define SSD1306_LCDHEIGHT 16
|
||||
#endif
|
||||
|
||||
#define SSD1306_SETCONTRAST 0x81
|
||||
#define SSD1306_DISPLAYALLON_RESUME 0xA4
|
||||
#define SSD1306_DISPLAYALLON 0xA5
|
||||
#define SSD1306_NORMALDISPLAY 0xA6
|
||||
#define SSD1306_INVERTDISPLAY 0xA7
|
||||
#define SSD1306_DISPLAYOFF 0xAE
|
||||
#define SSD1306_DISPLAYON 0xAF
|
||||
|
||||
#define SSD1306_SETDISPLAYOFFSET 0xD3
|
||||
#define SSD1306_SETCOMPINS 0xDA
|
||||
|
||||
#define SSD1306_SETVCOMDETECT 0xDB
|
||||
|
||||
#define SSD1306_SETDISPLAYCLOCKDIV 0xD5
|
||||
#define SSD1306_SETPRECHARGE 0xD9
|
||||
|
||||
#define SSD1306_SETMULTIPLEX 0xA8
|
||||
|
||||
#define SSD1306_SETLOWCOLUMN 0x00
|
||||
#define SSD1306_SETHIGHCOLUMN 0x10
|
||||
|
||||
#define SSD1306_SETSTARTLINE 0x40
|
||||
|
||||
#define SSD1306_MEMORYMODE 0x20
|
||||
#define SSD1306_COLUMNADDR 0x21
|
||||
#define SSD1306_PAGEADDR 0x22
|
||||
|
||||
#define SSD1306_COMSCANINC 0xC0
|
||||
#define SSD1306_COMSCANDEC 0xC8
|
||||
|
||||
#define SSD1306_SEGREMAP 0xA0
|
||||
|
||||
#define SSD1306_CHARGEPUMP 0x8D
|
||||
|
||||
#define SSD1306_EXTERNALVCC 0x1
|
||||
#define SSD1306_SWITCHCAPVCC 0x2
|
||||
|
||||
// Scrolling #defines
|
||||
#define SSD1306_ACTIVATE_SCROLL 0x2F
|
||||
#define SSD1306_DEACTIVATE_SCROLL 0x2E
|
||||
#define SSD1306_SET_VERTICAL_SCROLL_AREA 0xA3
|
||||
#define SSD1306_RIGHT_HORIZONTAL_SCROLL 0x26
|
||||
#define SSD1306_LEFT_HORIZONTAL_SCROLL 0x27
|
||||
#define SSD1306_VERTICAL_AND_RIGHT_HORIZONTAL_SCROLL 0x29
|
||||
#define SSD1306_VERTICAL_AND_LEFT_HORIZONTAL_SCROLL 0x2A
|
||||
|
||||
class Adafruit_SSD1306 : public Adafruit_GFX {
|
||||
public:
|
||||
Adafruit_SSD1306(int8_t SID, int8_t SCLK, int8_t DC, int8_t RST, int8_t CS);
|
||||
Adafruit_SSD1306(int8_t DC, int8_t RST, int8_t CS);
|
||||
Adafruit_SSD1306(int8_t RST);
|
||||
|
||||
void begin(uint8_t switchvcc = SSD1306_SWITCHCAPVCC, uint8_t i2caddr = SSD1306_I2C_ADDRESS, bool reset=true);
|
||||
void ssd1306_command(uint8_t c);
|
||||
void ssd1306_data(uint8_t c);
|
||||
|
||||
void clearDisplay(void);
|
||||
void invertDisplay(uint8_t i);
|
||||
void display();
|
||||
|
||||
void startscrollright(uint8_t start, uint8_t stop);
|
||||
void startscrollleft(uint8_t start, uint8_t stop);
|
||||
|
||||
void startscrolldiagright(uint8_t start, uint8_t stop);
|
||||
void startscrolldiagleft(uint8_t start, uint8_t stop);
|
||||
void stopscroll(void);
|
||||
|
||||
void dim(boolean dim);
|
||||
|
||||
void drawPixel(int16_t x, int16_t y, uint16_t color);
|
||||
|
||||
virtual void drawFastVLine(int16_t x, int16_t y, int16_t h, uint16_t color);
|
||||
virtual void drawFastHLine(int16_t x, int16_t y, int16_t w, uint16_t color);
|
||||
|
||||
byte SSD1306_SETCOMPINS_V;
|
||||
|
||||
private:
|
||||
int8_t _i2caddr, _vccstate, sid, sclk, dc, rst, cs;
|
||||
void fastSPIwrite(uint8_t c);
|
||||
|
||||
boolean hwSPI;
|
||||
PortReg *mosiport, *clkport, *csport, *dcport;
|
||||
PortMask mosipinmask, clkpinmask, cspinmask, dcpinmask;
|
||||
|
||||
inline void drawFastVLineInternal(int16_t x, int16_t y, int16_t h, uint16_t color) __attribute__((always_inline));
|
||||
inline void drawFastHLineInternal(int16_t x, int16_t y, int16_t w, uint16_t color) __attribute__((always_inline));
|
||||
|
||||
};
|
||||
|
|
@ -1,24 +0,0 @@
|
|||
This is a library for our Monochrome OLEDs based on SSD1306 drivers
|
||||
|
||||
Pick one up today in the adafruit shop!
|
||||
------> http://www.adafruit.com/category/63_98
|
||||
|
||||
These displays use SPI to communicate, 4 or 5 pins are required to
|
||||
interface
|
||||
|
||||
Adafruit invests time and resources providing this open source code,
|
||||
please support Adafruit and open-source hardware by purchasing
|
||||
products from Adafruit!
|
||||
|
||||
Written by Limor Fried/Ladyada for Adafruit Industries.
|
||||
Scrolling code contributed by Michael Gregg
|
||||
BSD license, check license.txt for more information
|
||||
All text above must be included in any redistribution
|
||||
|
||||
To download. click the DOWNLOADS button in the top right corner, rename the uncompressed folder Adafruit_SSD1306. Check that the Adafruit_SSD1306 folder contains Adafruit_SSD1306.cpp and Adafruit_SSD1306.h
|
||||
|
||||
Place the Adafruit_SSD1306 library folder your <arduinosketchfolder>/libraries/ folder. You may need to create the libraries subfolder if its your first library. Restart the IDE.
|
||||
|
||||
You will also have to download the Adafruit GFX Graphics core which does all the circles, text, rectangles, etc. You can get it from
|
||||
https://github.com/adafruit/Adafruit-GFX-Library
|
||||
and download/install that library as well
|
||||
|
|
@ -1,357 +0,0 @@
|
|||
/*********************************************************************
|
||||
This is an example for our Monochrome OLEDs based on SSD1306 drivers
|
||||
|
||||
Pick one up today in the adafruit shop!
|
||||
------> http://www.adafruit.com/category/63_98
|
||||
|
||||
This example is for a 128x32 size display using I2C to communicate
|
||||
3 pins are required to interface (2 I2C and one reset)
|
||||
|
||||
Adafruit invests time and resources providing this open source code,
|
||||
please support Adafruit and open-source hardware by purchasing
|
||||
products from Adafruit!
|
||||
|
||||
Written by Limor Fried/Ladyada for Adafruit Industries.
|
||||
BSD license, check license.txt for more information
|
||||
All text above, and the splash screen must be included in any redistribution
|
||||
*********************************************************************/
|
||||
|
||||
#include <SPI.h>
|
||||
#include <Wire.h>
|
||||
#include <Adafruit_GFX.h>
|
||||
#include <Adafruit_SSD1306.h>
|
||||
|
||||
#define OLED_RESET 4
|
||||
Adafruit_SSD1306 display(OLED_RESET);
|
||||
|
||||
#define NUMFLAKES 10
|
||||
#define XPOS 0
|
||||
#define YPOS 1
|
||||
#define DELTAY 2
|
||||
|
||||
|
||||
#define LOGO16_GLCD_HEIGHT 16
|
||||
#define LOGO16_GLCD_WIDTH 16
|
||||
static const unsigned char PROGMEM logo16_glcd_bmp[] =
|
||||
{ B00000000, B11000000,
|
||||
B00000001, B11000000,
|
||||
B00000001, B11000000,
|
||||
B00000011, B11100000,
|
||||
B11110011, B11100000,
|
||||
B11111110, B11111000,
|
||||
B01111110, B11111111,
|
||||
B00110011, B10011111,
|
||||
B00011111, B11111100,
|
||||
B00001101, B01110000,
|
||||
B00011011, B10100000,
|
||||
B00111111, B11100000,
|
||||
B00111111, B11110000,
|
||||
B01111100, B11110000,
|
||||
B01110000, B01110000,
|
||||
B00000000, B00110000 };
|
||||
|
||||
#if (SSD1306_LCDHEIGHT != 32)
|
||||
#error("Height incorrect, please fix Adafruit_SSD1306.h!");
|
||||
#endif
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
// by default, we'll generate the high voltage from the 3.3v line internally! (neat!)
|
||||
display.begin(SSD1306_SWITCHCAPVCC, 0x3C); // initialize with the I2C addr 0x3C (for the 128x32)
|
||||
// init done
|
||||
|
||||
// Show image buffer on the display hardware.
|
||||
// Since the buffer is intialized with an Adafruit splashscreen
|
||||
// internally, this will display the splashscreen.
|
||||
display.display();
|
||||
delay(2000);
|
||||
|
||||
// Clear the buffer.
|
||||
display.clearDisplay();
|
||||
|
||||
// draw a single pixel
|
||||
display.drawPixel(10, 10, WHITE);
|
||||
// Show the display buffer on the hardware.
|
||||
// NOTE: You _must_ call display after making any drawing commands
|
||||
// to make them visible on the display hardware!
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw many lines
|
||||
testdrawline();
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw rectangles
|
||||
testdrawrect();
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw multiple rectangles
|
||||
testfillrect();
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw mulitple circles
|
||||
testdrawcircle();
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw a white circle, 10 pixel radius
|
||||
display.fillCircle(display.width()/2, display.height()/2, 10, WHITE);
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
testdrawroundrect();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
testfillroundrect();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
testdrawtriangle();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
testfilltriangle();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw the first ~12 characters in the font
|
||||
testdrawchar();
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw scrolling text
|
||||
testscrolltext();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// text display tests
|
||||
display.setTextSize(1);
|
||||
display.setTextColor(WHITE);
|
||||
display.setCursor(0,0);
|
||||
display.println("Hello, world!");
|
||||
display.setTextColor(BLACK, WHITE); // 'inverted' text
|
||||
display.println(3.141592);
|
||||
display.setTextSize(2);
|
||||
display.setTextColor(WHITE);
|
||||
display.print("0x"); display.println(0xDEADBEEF, HEX);
|
||||
display.display();
|
||||
delay(2000);
|
||||
|
||||
// miniature bitmap display
|
||||
display.clearDisplay();
|
||||
display.drawBitmap(30, 16, logo16_glcd_bmp, 16, 16, 1);
|
||||
display.display();
|
||||
|
||||
// invert the display
|
||||
display.invertDisplay(true);
|
||||
delay(1000);
|
||||
display.invertDisplay(false);
|
||||
delay(1000);
|
||||
|
||||
// draw a bitmap icon and 'animate' movement
|
||||
testdrawbitmap(logo16_glcd_bmp, LOGO16_GLCD_HEIGHT, LOGO16_GLCD_WIDTH);
|
||||
}
|
||||
|
||||
|
||||
void loop() {
|
||||
|
||||
}
|
||||
|
||||
|
||||
void testdrawbitmap(const uint8_t *bitmap, uint8_t w, uint8_t h) {
|
||||
uint8_t icons[NUMFLAKES][3];
|
||||
|
||||
// initialize
|
||||
for (uint8_t f=0; f< NUMFLAKES; f++) {
|
||||
icons[f][XPOS] = random(display.width());
|
||||
icons[f][YPOS] = 0;
|
||||
icons[f][DELTAY] = random(5) + 1;
|
||||
|
||||
Serial.print("x: ");
|
||||
Serial.print(icons[f][XPOS], DEC);
|
||||
Serial.print(" y: ");
|
||||
Serial.print(icons[f][YPOS], DEC);
|
||||
Serial.print(" dy: ");
|
||||
Serial.println(icons[f][DELTAY], DEC);
|
||||
}
|
||||
|
||||
while (1) {
|
||||
// draw each icon
|
||||
for (uint8_t f=0; f< NUMFLAKES; f++) {
|
||||
display.drawBitmap(icons[f][XPOS], icons[f][YPOS], logo16_glcd_bmp, w, h, WHITE);
|
||||
}
|
||||
display.display();
|
||||
delay(200);
|
||||
|
||||
// then erase it + move it
|
||||
for (uint8_t f=0; f< NUMFLAKES; f++) {
|
||||
display.drawBitmap(icons[f][XPOS], icons[f][YPOS], logo16_glcd_bmp, w, h, BLACK);
|
||||
// move it
|
||||
icons[f][YPOS] += icons[f][DELTAY];
|
||||
// if its gone, reinit
|
||||
if (icons[f][YPOS] > display.height()) {
|
||||
icons[f][XPOS] = random(display.width());
|
||||
icons[f][YPOS] = 0;
|
||||
icons[f][DELTAY] = random(5) + 1;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
void testdrawchar(void) {
|
||||
display.setTextSize(1);
|
||||
display.setTextColor(WHITE);
|
||||
display.setCursor(0,0);
|
||||
|
||||
for (uint8_t i=0; i < 168; i++) {
|
||||
if (i == '\n') continue;
|
||||
display.write(i);
|
||||
if ((i > 0) && (i % 21 == 0))
|
||||
display.println();
|
||||
}
|
||||
display.display();
|
||||
}
|
||||
|
||||
void testdrawcircle(void) {
|
||||
for (int16_t i=0; i<display.height(); i+=2) {
|
||||
display.drawCircle(display.width()/2, display.height()/2, i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
}
|
||||
|
||||
void testfillrect(void) {
|
||||
uint8_t color = 1;
|
||||
for (int16_t i=0; i<display.height()/2; i+=3) {
|
||||
// alternate colors
|
||||
display.fillRect(i, i, display.width()-i*2, display.height()-i*2, color%2);
|
||||
display.display();
|
||||
color++;
|
||||
}
|
||||
}
|
||||
|
||||
void testdrawtriangle(void) {
|
||||
for (int16_t i=0; i<min(display.width(),display.height())/2; i+=5) {
|
||||
display.drawTriangle(display.width()/2, display.height()/2-i,
|
||||
display.width()/2-i, display.height()/2+i,
|
||||
display.width()/2+i, display.height()/2+i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
}
|
||||
|
||||
void testfilltriangle(void) {
|
||||
uint8_t color = WHITE;
|
||||
for (int16_t i=min(display.width(),display.height())/2; i>0; i-=5) {
|
||||
display.fillTriangle(display.width()/2, display.height()/2-i,
|
||||
display.width()/2-i, display.height()/2+i,
|
||||
display.width()/2+i, display.height()/2+i, WHITE);
|
||||
if (color == WHITE) color = BLACK;
|
||||
else color = WHITE;
|
||||
display.display();
|
||||
}
|
||||
}
|
||||
|
||||
void testdrawroundrect(void) {
|
||||
for (int16_t i=0; i<display.height()/2-2; i+=2) {
|
||||
display.drawRoundRect(i, i, display.width()-2*i, display.height()-2*i, display.height()/4, WHITE);
|
||||
display.display();
|
||||
}
|
||||
}
|
||||
|
||||
void testfillroundrect(void) {
|
||||
uint8_t color = WHITE;
|
||||
for (int16_t i=0; i<display.height()/2-2; i+=2) {
|
||||
display.fillRoundRect(i, i, display.width()-2*i, display.height()-2*i, display.height()/4, color);
|
||||
if (color == WHITE) color = BLACK;
|
||||
else color = WHITE;
|
||||
display.display();
|
||||
}
|
||||
}
|
||||
|
||||
void testdrawrect(void) {
|
||||
for (int16_t i=0; i<display.height()/2; i+=2) {
|
||||
display.drawRect(i, i, display.width()-2*i, display.height()-2*i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
}
|
||||
|
||||
void testdrawline() {
|
||||
for (int16_t i=0; i<display.width(); i+=4) {
|
||||
display.drawLine(0, 0, i, display.height()-1, WHITE);
|
||||
display.display();
|
||||
}
|
||||
for (int16_t i=0; i<display.height(); i+=4) {
|
||||
display.drawLine(0, 0, display.width()-1, i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
delay(250);
|
||||
|
||||
display.clearDisplay();
|
||||
for (int16_t i=0; i<display.width(); i+=4) {
|
||||
display.drawLine(0, display.height()-1, i, 0, WHITE);
|
||||
display.display();
|
||||
}
|
||||
for (int16_t i=display.height()-1; i>=0; i-=4) {
|
||||
display.drawLine(0, display.height()-1, display.width()-1, i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
delay(250);
|
||||
|
||||
display.clearDisplay();
|
||||
for (int16_t i=display.width()-1; i>=0; i-=4) {
|
||||
display.drawLine(display.width()-1, display.height()-1, i, 0, WHITE);
|
||||
display.display();
|
||||
}
|
||||
for (int16_t i=display.height()-1; i>=0; i-=4) {
|
||||
display.drawLine(display.width()-1, display.height()-1, 0, i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
delay(250);
|
||||
|
||||
display.clearDisplay();
|
||||
for (int16_t i=0; i<display.height(); i+=4) {
|
||||
display.drawLine(display.width()-1, 0, 0, i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
for (int16_t i=0; i<display.width(); i+=4) {
|
||||
display.drawLine(display.width()-1, 0, i, display.height()-1, WHITE);
|
||||
display.display();
|
||||
}
|
||||
delay(250);
|
||||
}
|
||||
|
||||
void testscrolltext(void) {
|
||||
display.setTextSize(2);
|
||||
display.setTextColor(WHITE);
|
||||
display.setCursor(10,0);
|
||||
display.clearDisplay();
|
||||
display.println("scroll");
|
||||
display.display();
|
||||
|
||||
display.startscrollright(0x00, 0x0F);
|
||||
delay(2000);
|
||||
display.stopscroll();
|
||||
delay(1000);
|
||||
display.startscrollleft(0x00, 0x0F);
|
||||
delay(2000);
|
||||
display.stopscroll();
|
||||
delay(1000);
|
||||
display.startscrolldiagright(0x00, 0x07);
|
||||
delay(2000);
|
||||
display.startscrolldiagleft(0x00, 0x07);
|
||||
delay(2000);
|
||||
display.stopscroll();
|
||||
}
|
||||
|
||||
|
|
@ -1,368 +0,0 @@
|
|||
/*********************************************************************
|
||||
This is an example for our Monochrome OLEDs based on SSD1306 drivers
|
||||
|
||||
Pick one up today in the adafruit shop!
|
||||
------> http://www.adafruit.com/category/63_98
|
||||
|
||||
This example is for a 128x32 size display using SPI to communicate
|
||||
4 or 5 pins are required to interface
|
||||
|
||||
Adafruit invests time and resources providing this open source code,
|
||||
please support Adafruit and open-source hardware by purchasing
|
||||
products from Adafruit!
|
||||
|
||||
Written by Limor Fried/Ladyada for Adafruit Industries.
|
||||
BSD license, check license.txt for more information
|
||||
All text above, and the splash screen must be included in any redistribution
|
||||
*********************************************************************/
|
||||
|
||||
#include <SPI.h>
|
||||
#include <Wire.h>
|
||||
#include <Adafruit_GFX.h>
|
||||
#include <Adafruit_SSD1306.h>
|
||||
|
||||
// If using software SPI (the default case):
|
||||
#define OLED_MOSI 9
|
||||
#define OLED_CLK 10
|
||||
#define OLED_DC 11
|
||||
#define OLED_CS 12
|
||||
#define OLED_RESET 13
|
||||
Adafruit_SSD1306 display(OLED_MOSI, OLED_CLK, OLED_DC, OLED_RESET, OLED_CS);
|
||||
|
||||
/* Uncomment this block to use hardware SPI
|
||||
#define OLED_DC 6
|
||||
#define OLED_CS 7
|
||||
#define OLED_RESET 8
|
||||
Adafruit_SSD1306 display(OLED_DC, OLED_RESET, OLED_CS);
|
||||
*/
|
||||
|
||||
#define NUMFLAKES 10
|
||||
#define XPOS 0
|
||||
#define YPOS 1
|
||||
#define DELTAY 2
|
||||
|
||||
#define LOGO16_GLCD_HEIGHT 16
|
||||
#define LOGO16_GLCD_WIDTH 16
|
||||
static const unsigned char PROGMEM logo16_glcd_bmp[] =
|
||||
{ B00000000, B11000000,
|
||||
B00000001, B11000000,
|
||||
B00000001, B11000000,
|
||||
B00000011, B11100000,
|
||||
B11110011, B11100000,
|
||||
B11111110, B11111000,
|
||||
B01111110, B11111111,
|
||||
B00110011, B10011111,
|
||||
B00011111, B11111100,
|
||||
B00001101, B01110000,
|
||||
B00011011, B10100000,
|
||||
B00111111, B11100000,
|
||||
B00111111, B11110000,
|
||||
B01111100, B11110000,
|
||||
B01110000, B01110000,
|
||||
B00000000, B00110000 };
|
||||
|
||||
#if (SSD1306_LCDHEIGHT != 32)
|
||||
#error("Height incorrect, please fix Adafruit_SSD1306.h!");
|
||||
#endif
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
// by default, we'll generate the high voltage from the 3.3v line internally! (neat!)
|
||||
display.begin(SSD1306_SWITCHCAPVCC);
|
||||
// init done
|
||||
|
||||
// Show image buffer on the display hardware.
|
||||
// Since the buffer is intialized with an Adafruit splashscreen
|
||||
// internally, this will display the splashscreen.
|
||||
display.display();
|
||||
delay(2000);
|
||||
|
||||
// Clear the buffer.
|
||||
display.clearDisplay();
|
||||
|
||||
// draw a single pixel
|
||||
display.drawPixel(10, 10, WHITE);
|
||||
// Show the display buffer on the hardware.
|
||||
// NOTE: You _must_ call display after making any drawing commands
|
||||
// to make them visible on the display hardware!
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw many lines
|
||||
testdrawline();
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw rectangles
|
||||
testdrawrect();
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw multiple rectangles
|
||||
testfillrect();
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw mulitple circles
|
||||
testdrawcircle();
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw a white circle, 10 pixel radius
|
||||
display.fillCircle(display.width()/2, display.height()/2, 10, WHITE);
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
testdrawroundrect();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
testfillroundrect();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
testdrawtriangle();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
testfilltriangle();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw the first ~12 characters in the font
|
||||
testdrawchar();
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw scrolling text
|
||||
testscrolltext();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// text display tests
|
||||
display.setTextSize(1);
|
||||
display.setTextColor(WHITE);
|
||||
display.setCursor(0,0);
|
||||
display.println("Hello, world!");
|
||||
display.setTextColor(BLACK, WHITE); // 'inverted' text
|
||||
display.println(3.141592);
|
||||
display.setTextSize(2);
|
||||
display.setTextColor(WHITE);
|
||||
display.print("0x"); display.println(0xDEADBEEF, HEX);
|
||||
display.display();
|
||||
delay(2000);
|
||||
|
||||
// miniature bitmap display
|
||||
display.clearDisplay();
|
||||
display.drawBitmap(30, 16, logo16_glcd_bmp, 16, 16, 1);
|
||||
display.display();
|
||||
|
||||
// invert the display
|
||||
display.invertDisplay(true);
|
||||
delay(1000);
|
||||
display.invertDisplay(false);
|
||||
delay(1000);
|
||||
|
||||
// draw a bitmap icon and 'animate' movement
|
||||
testdrawbitmap(logo16_glcd_bmp, LOGO16_GLCD_HEIGHT, LOGO16_GLCD_WIDTH);
|
||||
}
|
||||
|
||||
|
||||
void loop() {
|
||||
|
||||
}
|
||||
|
||||
|
||||
void testdrawbitmap(const uint8_t *bitmap, uint8_t w, uint8_t h) {
|
||||
uint8_t icons[NUMFLAKES][3];
|
||||
|
||||
// initialize
|
||||
for (uint8_t f=0; f< NUMFLAKES; f++) {
|
||||
icons[f][XPOS] = random(display.width());
|
||||
icons[f][YPOS] = 0;
|
||||
icons[f][DELTAY] = random(5) + 1;
|
||||
|
||||
Serial.print("x: ");
|
||||
Serial.print(icons[f][XPOS], DEC);
|
||||
Serial.print(" y: ");
|
||||
Serial.print(icons[f][YPOS], DEC);
|
||||
Serial.print(" dy: ");
|
||||
Serial.println(icons[f][DELTAY], DEC);
|
||||
}
|
||||
|
||||
while (1) {
|
||||
// draw each icon
|
||||
for (uint8_t f=0; f< NUMFLAKES; f++) {
|
||||
display.drawBitmap(icons[f][XPOS], icons[f][YPOS], logo16_glcd_bmp, w, h, WHITE);
|
||||
}
|
||||
display.display();
|
||||
delay(200);
|
||||
|
||||
// then erase it + move it
|
||||
for (uint8_t f=0; f< NUMFLAKES; f++) {
|
||||
display.drawBitmap(icons[f][XPOS], icons[f][YPOS], logo16_glcd_bmp, w, h, BLACK);
|
||||
// move it
|
||||
icons[f][YPOS] += icons[f][DELTAY];
|
||||
// if its gone, reinit
|
||||
if (icons[f][YPOS] > display.height()) {
|
||||
icons[f][XPOS] = random(display.width());
|
||||
icons[f][YPOS] = 0;
|
||||
icons[f][DELTAY] = random(5) + 1;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
void testdrawchar(void) {
|
||||
display.setTextSize(1);
|
||||
display.setTextColor(WHITE);
|
||||
display.setCursor(0,0);
|
||||
|
||||
for (uint8_t i=0; i < 168; i++) {
|
||||
if (i == '\n') continue;
|
||||
display.write(i);
|
||||
if ((i > 0) && (i % 21 == 0))
|
||||
display.println();
|
||||
}
|
||||
display.display();
|
||||
}
|
||||
|
||||
void testdrawcircle(void) {
|
||||
for (int16_t i=0; i<display.height(); i+=2) {
|
||||
display.drawCircle(display.width()/2, display.height()/2, i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
}
|
||||
|
||||
void testfillrect(void) {
|
||||
uint8_t color = 1;
|
||||
for (int16_t i=0; i<display.height()/2; i+=3) {
|
||||
// alternate colors
|
||||
display.fillRect(i, i, display.width()-i*2, display.height()-i*2, color%2);
|
||||
display.display();
|
||||
color++;
|
||||
}
|
||||
}
|
||||
|
||||
void testdrawtriangle(void) {
|
||||
for (int16_t i=0; i<min(display.width(),display.height())/2; i+=5) {
|
||||
display.drawTriangle(display.width()/2, display.height()/2-i,
|
||||
display.width()/2-i, display.height()/2+i,
|
||||
display.width()/2+i, display.height()/2+i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
}
|
||||
|
||||
void testfilltriangle(void) {
|
||||
uint8_t color = WHITE;
|
||||
for (int16_t i=min(display.width(),display.height())/2; i>0; i-=5) {
|
||||
display.fillTriangle(display.width()/2, display.height()/2-i,
|
||||
display.width()/2-i, display.height()/2+i,
|
||||
display.width()/2+i, display.height()/2+i, WHITE);
|
||||
if (color == WHITE) color = BLACK;
|
||||
else color = WHITE;
|
||||
display.display();
|
||||
}
|
||||
}
|
||||
|
||||
void testdrawroundrect(void) {
|
||||
for (int16_t i=0; i<display.height()/2-2; i+=2) {
|
||||
display.drawRoundRect(i, i, display.width()-2*i, display.height()-2*i, display.height()/4, WHITE);
|
||||
display.display();
|
||||
}
|
||||
}
|
||||
|
||||
void testfillroundrect(void) {
|
||||
uint8_t color = WHITE;
|
||||
for (int16_t i=0; i<display.height()/2-2; i+=2) {
|
||||
display.fillRoundRect(i, i, display.width()-2*i, display.height()-2*i, display.height()/4, color);
|
||||
if (color == WHITE) color = BLACK;
|
||||
else color = WHITE;
|
||||
display.display();
|
||||
}
|
||||
}
|
||||
|
||||
void testdrawrect(void) {
|
||||
for (int16_t i=0; i<display.height()/2; i+=2) {
|
||||
display.drawRect(i, i, display.width()-2*i, display.height()-2*i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
}
|
||||
|
||||
void testdrawline() {
|
||||
for (int16_t i=0; i<display.width(); i+=4) {
|
||||
display.drawLine(0, 0, i, display.height()-1, WHITE);
|
||||
display.display();
|
||||
}
|
||||
for (int16_t i=0; i<display.height(); i+=4) {
|
||||
display.drawLine(0, 0, display.width()-1, i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
delay(250);
|
||||
|
||||
display.clearDisplay();
|
||||
for (int16_t i=0; i<display.width(); i+=4) {
|
||||
display.drawLine(0, display.height()-1, i, 0, WHITE);
|
||||
display.display();
|
||||
}
|
||||
for (int16_t i=display.height()-1; i>=0; i-=4) {
|
||||
display.drawLine(0, display.height()-1, display.width()-1, i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
delay(250);
|
||||
|
||||
display.clearDisplay();
|
||||
for (int16_t i=display.width()-1; i>=0; i-=4) {
|
||||
display.drawLine(display.width()-1, display.height()-1, i, 0, WHITE);
|
||||
display.display();
|
||||
}
|
||||
for (int16_t i=display.height()-1; i>=0; i-=4) {
|
||||
display.drawLine(display.width()-1, display.height()-1, 0, i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
delay(250);
|
||||
|
||||
display.clearDisplay();
|
||||
for (int16_t i=0; i<display.height(); i+=4) {
|
||||
display.drawLine(display.width()-1, 0, 0, i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
for (int16_t i=0; i<display.width(); i+=4) {
|
||||
display.drawLine(display.width()-1, 0, i, display.height()-1, WHITE);
|
||||
display.display();
|
||||
}
|
||||
delay(250);
|
||||
}
|
||||
|
||||
void testscrolltext(void) {
|
||||
display.setTextSize(2);
|
||||
display.setTextColor(WHITE);
|
||||
display.setCursor(10,0);
|
||||
display.clearDisplay();
|
||||
display.println("scroll");
|
||||
display.display();
|
||||
|
||||
display.startscrollright(0x00, 0x0F);
|
||||
delay(2000);
|
||||
display.stopscroll();
|
||||
delay(1000);
|
||||
display.startscrollleft(0x00, 0x0F);
|
||||
delay(2000);
|
||||
display.stopscroll();
|
||||
delay(1000);
|
||||
display.startscrolldiagright(0x00, 0x07);
|
||||
delay(2000);
|
||||
display.startscrolldiagleft(0x00, 0x07);
|
||||
delay(2000);
|
||||
display.stopscroll();
|
||||
}
|
||||
|
||||
|
|
@ -1,356 +0,0 @@
|
|||
/*********************************************************************
|
||||
This is an example for our Monochrome OLEDs based on SSD1306 drivers
|
||||
|
||||
Pick one up today in the adafruit shop!
|
||||
------> http://www.adafruit.com/category/63_98
|
||||
|
||||
This example is for a 128x64 size display using I2C to communicate
|
||||
3 pins are required to interface (2 I2C and one reset)
|
||||
|
||||
Adafruit invests time and resources providing this open source code,
|
||||
please support Adafruit and open-source hardware by purchasing
|
||||
products from Adafruit!
|
||||
|
||||
Written by Limor Fried/Ladyada for Adafruit Industries.
|
||||
BSD license, check license.txt for more information
|
||||
All text above, and the splash screen must be included in any redistribution
|
||||
*********************************************************************/
|
||||
|
||||
#include <SPI.h>
|
||||
#include <Wire.h>
|
||||
#include <Adafruit_GFX.h>
|
||||
#include <Adafruit_SSD1306.h>
|
||||
|
||||
#define OLED_RESET 4
|
||||
Adafruit_SSD1306 display(OLED_RESET);
|
||||
|
||||
#define NUMFLAKES 10
|
||||
#define XPOS 0
|
||||
#define YPOS 1
|
||||
#define DELTAY 2
|
||||
|
||||
|
||||
#define LOGO16_GLCD_HEIGHT 16
|
||||
#define LOGO16_GLCD_WIDTH 16
|
||||
static const unsigned char PROGMEM logo16_glcd_bmp[] =
|
||||
{ B00000000, B11000000,
|
||||
B00000001, B11000000,
|
||||
B00000001, B11000000,
|
||||
B00000011, B11100000,
|
||||
B11110011, B11100000,
|
||||
B11111110, B11111000,
|
||||
B01111110, B11111111,
|
||||
B00110011, B10011111,
|
||||
B00011111, B11111100,
|
||||
B00001101, B01110000,
|
||||
B00011011, B10100000,
|
||||
B00111111, B11100000,
|
||||
B00111111, B11110000,
|
||||
B01111100, B11110000,
|
||||
B01110000, B01110000,
|
||||
B00000000, B00110000 };
|
||||
|
||||
#if (SSD1306_LCDHEIGHT != 64)
|
||||
#error("Height incorrect, please fix Adafruit_SSD1306.h!");
|
||||
#endif
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
// by default, we'll generate the high voltage from the 3.3v line internally! (neat!)
|
||||
display.begin(SSD1306_SWITCHCAPVCC, 0x3D); // initialize with the I2C addr 0x3D (for the 128x64)
|
||||
// init done
|
||||
|
||||
// Show image buffer on the display hardware.
|
||||
// Since the buffer is intialized with an Adafruit splashscreen
|
||||
// internally, this will display the splashscreen.
|
||||
display.display();
|
||||
delay(2000);
|
||||
|
||||
// Clear the buffer.
|
||||
display.clearDisplay();
|
||||
|
||||
// draw a single pixel
|
||||
display.drawPixel(10, 10, WHITE);
|
||||
// Show the display buffer on the hardware.
|
||||
// NOTE: You _must_ call display after making any drawing commands
|
||||
// to make them visible on the display hardware!
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw many lines
|
||||
testdrawline();
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw rectangles
|
||||
testdrawrect();
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw multiple rectangles
|
||||
testfillrect();
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw mulitple circles
|
||||
testdrawcircle();
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw a white circle, 10 pixel radius
|
||||
display.fillCircle(display.width()/2, display.height()/2, 10, WHITE);
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
testdrawroundrect();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
testfillroundrect();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
testdrawtriangle();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
testfilltriangle();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw the first ~12 characters in the font
|
||||
testdrawchar();
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw scrolling text
|
||||
testscrolltext();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// text display tests
|
||||
display.setTextSize(1);
|
||||
display.setTextColor(WHITE);
|
||||
display.setCursor(0,0);
|
||||
display.println("Hello, world!");
|
||||
display.setTextColor(BLACK, WHITE); // 'inverted' text
|
||||
display.println(3.141592);
|
||||
display.setTextSize(2);
|
||||
display.setTextColor(WHITE);
|
||||
display.print("0x"); display.println(0xDEADBEEF, HEX);
|
||||
display.display();
|
||||
delay(2000);
|
||||
|
||||
// miniature bitmap display
|
||||
display.clearDisplay();
|
||||
display.drawBitmap(30, 16, logo16_glcd_bmp, 16, 16, 1);
|
||||
display.display();
|
||||
|
||||
// invert the display
|
||||
display.invertDisplay(true);
|
||||
delay(1000);
|
||||
display.invertDisplay(false);
|
||||
delay(1000);
|
||||
|
||||
// draw a bitmap icon and 'animate' movement
|
||||
testdrawbitmap(logo16_glcd_bmp, LOGO16_GLCD_HEIGHT, LOGO16_GLCD_WIDTH);
|
||||
}
|
||||
|
||||
|
||||
void loop() {
|
||||
|
||||
}
|
||||
|
||||
|
||||
void testdrawbitmap(const uint8_t *bitmap, uint8_t w, uint8_t h) {
|
||||
uint8_t icons[NUMFLAKES][3];
|
||||
|
||||
// initialize
|
||||
for (uint8_t f=0; f< NUMFLAKES; f++) {
|
||||
icons[f][XPOS] = random(display.width());
|
||||
icons[f][YPOS] = 0;
|
||||
icons[f][DELTAY] = random(5) + 1;
|
||||
|
||||
Serial.print("x: ");
|
||||
Serial.print(icons[f][XPOS], DEC);
|
||||
Serial.print(" y: ");
|
||||
Serial.print(icons[f][YPOS], DEC);
|
||||
Serial.print(" dy: ");
|
||||
Serial.println(icons[f][DELTAY], DEC);
|
||||
}
|
||||
|
||||
while (1) {
|
||||
// draw each icon
|
||||
for (uint8_t f=0; f< NUMFLAKES; f++) {
|
||||
display.drawBitmap(icons[f][XPOS], icons[f][YPOS], logo16_glcd_bmp, w, h, WHITE);
|
||||
}
|
||||
display.display();
|
||||
delay(200);
|
||||
|
||||
// then erase it + move it
|
||||
for (uint8_t f=0; f< NUMFLAKES; f++) {
|
||||
display.drawBitmap(icons[f][XPOS], icons[f][YPOS], logo16_glcd_bmp, w, h, BLACK);
|
||||
// move it
|
||||
icons[f][YPOS] += icons[f][DELTAY];
|
||||
// if its gone, reinit
|
||||
if (icons[f][YPOS] > display.height()) {
|
||||
icons[f][XPOS] = random(display.width());
|
||||
icons[f][YPOS] = 0;
|
||||
icons[f][DELTAY] = random(5) + 1;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
void testdrawchar(void) {
|
||||
display.setTextSize(1);
|
||||
display.setTextColor(WHITE);
|
||||
display.setCursor(0,0);
|
||||
|
||||
for (uint8_t i=0; i < 168; i++) {
|
||||
if (i == '\n') continue;
|
||||
display.write(i);
|
||||
if ((i > 0) && (i % 21 == 0))
|
||||
display.println();
|
||||
}
|
||||
display.display();
|
||||
}
|
||||
|
||||
void testdrawcircle(void) {
|
||||
for (int16_t i=0; i<display.height(); i+=2) {
|
||||
display.drawCircle(display.width()/2, display.height()/2, i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
}
|
||||
|
||||
void testfillrect(void) {
|
||||
uint8_t color = 1;
|
||||
for (int16_t i=0; i<display.height()/2; i+=3) {
|
||||
// alternate colors
|
||||
display.fillRect(i, i, display.width()-i*2, display.height()-i*2, color%2);
|
||||
display.display();
|
||||
color++;
|
||||
}
|
||||
}
|
||||
|
||||
void testdrawtriangle(void) {
|
||||
for (int16_t i=0; i<min(display.width(),display.height())/2; i+=5) {
|
||||
display.drawTriangle(display.width()/2, display.height()/2-i,
|
||||
display.width()/2-i, display.height()/2+i,
|
||||
display.width()/2+i, display.height()/2+i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
}
|
||||
|
||||
void testfilltriangle(void) {
|
||||
uint8_t color = WHITE;
|
||||
for (int16_t i=min(display.width(),display.height())/2; i>0; i-=5) {
|
||||
display.fillTriangle(display.width()/2, display.height()/2-i,
|
||||
display.width()/2-i, display.height()/2+i,
|
||||
display.width()/2+i, display.height()/2+i, WHITE);
|
||||
if (color == WHITE) color = BLACK;
|
||||
else color = WHITE;
|
||||
display.display();
|
||||
}
|
||||
}
|
||||
|
||||
void testdrawroundrect(void) {
|
||||
for (int16_t i=0; i<display.height()/2-2; i+=2) {
|
||||
display.drawRoundRect(i, i, display.width()-2*i, display.height()-2*i, display.height()/4, WHITE);
|
||||
display.display();
|
||||
}
|
||||
}
|
||||
|
||||
void testfillroundrect(void) {
|
||||
uint8_t color = WHITE;
|
||||
for (int16_t i=0; i<display.height()/2-2; i+=2) {
|
||||
display.fillRoundRect(i, i, display.width()-2*i, display.height()-2*i, display.height()/4, color);
|
||||
if (color == WHITE) color = BLACK;
|
||||
else color = WHITE;
|
||||
display.display();
|
||||
}
|
||||
}
|
||||
|
||||
void testdrawrect(void) {
|
||||
for (int16_t i=0; i<display.height()/2; i+=2) {
|
||||
display.drawRect(i, i, display.width()-2*i, display.height()-2*i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
}
|
||||
|
||||
void testdrawline() {
|
||||
for (int16_t i=0; i<display.width(); i+=4) {
|
||||
display.drawLine(0, 0, i, display.height()-1, WHITE);
|
||||
display.display();
|
||||
}
|
||||
for (int16_t i=0; i<display.height(); i+=4) {
|
||||
display.drawLine(0, 0, display.width()-1, i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
delay(250);
|
||||
|
||||
display.clearDisplay();
|
||||
for (int16_t i=0; i<display.width(); i+=4) {
|
||||
display.drawLine(0, display.height()-1, i, 0, WHITE);
|
||||
display.display();
|
||||
}
|
||||
for (int16_t i=display.height()-1; i>=0; i-=4) {
|
||||
display.drawLine(0, display.height()-1, display.width()-1, i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
delay(250);
|
||||
|
||||
display.clearDisplay();
|
||||
for (int16_t i=display.width()-1; i>=0; i-=4) {
|
||||
display.drawLine(display.width()-1, display.height()-1, i, 0, WHITE);
|
||||
display.display();
|
||||
}
|
||||
for (int16_t i=display.height()-1; i>=0; i-=4) {
|
||||
display.drawLine(display.width()-1, display.height()-1, 0, i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
delay(250);
|
||||
|
||||
display.clearDisplay();
|
||||
for (int16_t i=0; i<display.height(); i+=4) {
|
||||
display.drawLine(display.width()-1, 0, 0, i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
for (int16_t i=0; i<display.width(); i+=4) {
|
||||
display.drawLine(display.width()-1, 0, i, display.height()-1, WHITE);
|
||||
display.display();
|
||||
}
|
||||
delay(250);
|
||||
}
|
||||
|
||||
void testscrolltext(void) {
|
||||
display.setTextSize(2);
|
||||
display.setTextColor(WHITE);
|
||||
display.setCursor(10,0);
|
||||
display.clearDisplay();
|
||||
display.println("scroll");
|
||||
display.display();
|
||||
|
||||
display.startscrollright(0x00, 0x0F);
|
||||
delay(2000);
|
||||
display.stopscroll();
|
||||
delay(1000);
|
||||
display.startscrollleft(0x00, 0x0F);
|
||||
delay(2000);
|
||||
display.stopscroll();
|
||||
delay(1000);
|
||||
display.startscrolldiagright(0x00, 0x07);
|
||||
delay(2000);
|
||||
display.startscrolldiagleft(0x00, 0x07);
|
||||
delay(2000);
|
||||
display.stopscroll();
|
||||
}
|
||||
|
|
@ -1,368 +0,0 @@
|
|||
/*********************************************************************
|
||||
This is an example for our Monochrome OLEDs based on SSD1306 drivers
|
||||
|
||||
Pick one up today in the adafruit shop!
|
||||
------> http://www.adafruit.com/category/63_98
|
||||
|
||||
This example is for a 128x64 size display using SPI to communicate
|
||||
4 or 5 pins are required to interface
|
||||
|
||||
Adafruit invests time and resources providing this open source code,
|
||||
please support Adafruit and open-source hardware by purchasing
|
||||
products from Adafruit!
|
||||
|
||||
Written by Limor Fried/Ladyada for Adafruit Industries.
|
||||
BSD license, check license.txt for more information
|
||||
All text above, and the splash screen must be included in any redistribution
|
||||
*********************************************************************/
|
||||
|
||||
#include <SPI.h>
|
||||
#include <Wire.h>
|
||||
#include <Adafruit_GFX.h>
|
||||
#include <Adafruit_SSD1306.h>
|
||||
|
||||
// If using software SPI (the default case):
|
||||
#define OLED_MOSI 9
|
||||
#define OLED_CLK 10
|
||||
#define OLED_DC 11
|
||||
#define OLED_CS 12
|
||||
#define OLED_RESET 13
|
||||
Adafruit_SSD1306 display(OLED_MOSI, OLED_CLK, OLED_DC, OLED_RESET, OLED_CS);
|
||||
|
||||
/* Uncomment this block to use hardware SPI
|
||||
#define OLED_DC 6
|
||||
#define OLED_CS 7
|
||||
#define OLED_RESET 8
|
||||
Adafruit_SSD1306 display(OLED_DC, OLED_RESET, OLED_CS);
|
||||
*/
|
||||
|
||||
#define NUMFLAKES 10
|
||||
#define XPOS 0
|
||||
#define YPOS 1
|
||||
#define DELTAY 2
|
||||
|
||||
#define LOGO16_GLCD_HEIGHT 16
|
||||
#define LOGO16_GLCD_WIDTH 16
|
||||
static const unsigned char PROGMEM logo16_glcd_bmp[] =
|
||||
{ B00000000, B11000000,
|
||||
B00000001, B11000000,
|
||||
B00000001, B11000000,
|
||||
B00000011, B11100000,
|
||||
B11110011, B11100000,
|
||||
B11111110, B11111000,
|
||||
B01111110, B11111111,
|
||||
B00110011, B10011111,
|
||||
B00011111, B11111100,
|
||||
B00001101, B01110000,
|
||||
B00011011, B10100000,
|
||||
B00111111, B11100000,
|
||||
B00111111, B11110000,
|
||||
B01111100, B11110000,
|
||||
B01110000, B01110000,
|
||||
B00000000, B00110000 };
|
||||
|
||||
#if (SSD1306_LCDHEIGHT != 64)
|
||||
#error("Height incorrect, please fix Adafruit_SSD1306.h!");
|
||||
#endif
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
// by default, we'll generate the high voltage from the 3.3v line internally! (neat!)
|
||||
display.begin(SSD1306_SWITCHCAPVCC);
|
||||
// init done
|
||||
|
||||
// Show image buffer on the display hardware.
|
||||
// Since the buffer is intialized with an Adafruit splashscreen
|
||||
// internally, this will display the splashscreen.
|
||||
display.display();
|
||||
delay(2000);
|
||||
|
||||
// Clear the buffer.
|
||||
display.clearDisplay();
|
||||
|
||||
// draw a single pixel
|
||||
display.drawPixel(10, 10, WHITE);
|
||||
// Show the display buffer on the hardware.
|
||||
// NOTE: You _must_ call display after making any drawing commands
|
||||
// to make them visible on the display hardware!
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw many lines
|
||||
testdrawline();
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw rectangles
|
||||
testdrawrect();
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw multiple rectangles
|
||||
testfillrect();
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw mulitple circles
|
||||
testdrawcircle();
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw a white circle, 10 pixel radius
|
||||
display.fillCircle(display.width()/2, display.height()/2, 10, WHITE);
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
testdrawroundrect();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
testfillroundrect();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
testdrawtriangle();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
testfilltriangle();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw the first ~12 characters in the font
|
||||
testdrawchar();
|
||||
display.display();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// draw scrolling text
|
||||
testscrolltext();
|
||||
delay(2000);
|
||||
display.clearDisplay();
|
||||
|
||||
// text display tests
|
||||
display.setTextSize(1);
|
||||
display.setTextColor(WHITE);
|
||||
display.setCursor(0,0);
|
||||
display.println("Hello, world!");
|
||||
display.setTextColor(BLACK, WHITE); // 'inverted' text
|
||||
display.println(3.141592);
|
||||
display.setTextSize(2);
|
||||
display.setTextColor(WHITE);
|
||||
display.print("0x"); display.println(0xDEADBEEF, HEX);
|
||||
display.display();
|
||||
delay(2000);
|
||||
|
||||
// miniature bitmap display
|
||||
display.clearDisplay();
|
||||
display.drawBitmap(30, 16, logo16_glcd_bmp, 16, 16, 1);
|
||||
display.display();
|
||||
|
||||
// invert the display
|
||||
display.invertDisplay(true);
|
||||
delay(1000);
|
||||
display.invertDisplay(false);
|
||||
delay(1000);
|
||||
|
||||
// draw a bitmap icon and 'animate' movement
|
||||
testdrawbitmap(logo16_glcd_bmp, LOGO16_GLCD_HEIGHT, LOGO16_GLCD_WIDTH);
|
||||
}
|
||||
|
||||
|
||||
void loop() {
|
||||
|
||||
}
|
||||
|
||||
|
||||
void testdrawbitmap(const uint8_t *bitmap, uint8_t w, uint8_t h) {
|
||||
uint8_t icons[NUMFLAKES][3];
|
||||
|
||||
// initialize
|
||||
for (uint8_t f=0; f< NUMFLAKES; f++) {
|
||||
icons[f][XPOS] = random(display.width());
|
||||
icons[f][YPOS] = 0;
|
||||
icons[f][DELTAY] = random(5) + 1;
|
||||
|
||||
Serial.print("x: ");
|
||||
Serial.print(icons[f][XPOS], DEC);
|
||||
Serial.print(" y: ");
|
||||
Serial.print(icons[f][YPOS], DEC);
|
||||
Serial.print(" dy: ");
|
||||
Serial.println(icons[f][DELTAY], DEC);
|
||||
}
|
||||
|
||||
while (1) {
|
||||
// draw each icon
|
||||
for (uint8_t f=0; f< NUMFLAKES; f++) {
|
||||
display.drawBitmap(icons[f][XPOS], icons[f][YPOS], logo16_glcd_bmp, w, h, WHITE);
|
||||
}
|
||||
display.display();
|
||||
delay(200);
|
||||
|
||||
// then erase it + move it
|
||||
for (uint8_t f=0; f< NUMFLAKES; f++) {
|
||||
display.drawBitmap(icons[f][XPOS], icons[f][YPOS], logo16_glcd_bmp, w, h, BLACK);
|
||||
// move it
|
||||
icons[f][YPOS] += icons[f][DELTAY];
|
||||
// if its gone, reinit
|
||||
if (icons[f][YPOS] > display.height()) {
|
||||
icons[f][XPOS] = random(display.width());
|
||||
icons[f][YPOS] = 0;
|
||||
icons[f][DELTAY] = random(5) + 1;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
void testdrawchar(void) {
|
||||
display.setTextSize(1);
|
||||
display.setTextColor(WHITE);
|
||||
display.setCursor(0,0);
|
||||
|
||||
for (uint8_t i=0; i < 168; i++) {
|
||||
if (i == '\n') continue;
|
||||
display.write(i);
|
||||
if ((i > 0) && (i % 21 == 0))
|
||||
display.println();
|
||||
}
|
||||
display.display();
|
||||
}
|
||||
|
||||
void testdrawcircle(void) {
|
||||
for (int16_t i=0; i<display.height(); i+=2) {
|
||||
display.drawCircle(display.width()/2, display.height()/2, i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
}
|
||||
|
||||
void testfillrect(void) {
|
||||
uint8_t color = 1;
|
||||
for (int16_t i=0; i<display.height()/2; i+=3) {
|
||||
// alternate colors
|
||||
display.fillRect(i, i, display.width()-i*2, display.height()-i*2, color%2);
|
||||
display.display();
|
||||
color++;
|
||||
}
|
||||
}
|
||||
|
||||
void testdrawtriangle(void) {
|
||||
for (int16_t i=0; i<min(display.width(),display.height())/2; i+=5) {
|
||||
display.drawTriangle(display.width()/2, display.height()/2-i,
|
||||
display.width()/2-i, display.height()/2+i,
|
||||
display.width()/2+i, display.height()/2+i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
}
|
||||
|
||||
void testfilltriangle(void) {
|
||||
uint8_t color = WHITE;
|
||||
for (int16_t i=min(display.width(),display.height())/2; i>0; i-=5) {
|
||||
display.fillTriangle(display.width()/2, display.height()/2-i,
|
||||
display.width()/2-i, display.height()/2+i,
|
||||
display.width()/2+i, display.height()/2+i, WHITE);
|
||||
if (color == WHITE) color = BLACK;
|
||||
else color = WHITE;
|
||||
display.display();
|
||||
}
|
||||
}
|
||||
|
||||
void testdrawroundrect(void) {
|
||||
for (int16_t i=0; i<display.height()/2-2; i+=2) {
|
||||
display.drawRoundRect(i, i, display.width()-2*i, display.height()-2*i, display.height()/4, WHITE);
|
||||
display.display();
|
||||
}
|
||||
}
|
||||
|
||||
void testfillroundrect(void) {
|
||||
uint8_t color = WHITE;
|
||||
for (int16_t i=0; i<display.height()/2-2; i+=2) {
|
||||
display.fillRoundRect(i, i, display.width()-2*i, display.height()-2*i, display.height()/4, color);
|
||||
if (color == WHITE) color = BLACK;
|
||||
else color = WHITE;
|
||||
display.display();
|
||||
}
|
||||
}
|
||||
|
||||
void testdrawrect(void) {
|
||||
for (int16_t i=0; i<display.height()/2; i+=2) {
|
||||
display.drawRect(i, i, display.width()-2*i, display.height()-2*i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
}
|
||||
|
||||
void testdrawline() {
|
||||
for (int16_t i=0; i<display.width(); i+=4) {
|
||||
display.drawLine(0, 0, i, display.height()-1, WHITE);
|
||||
display.display();
|
||||
}
|
||||
for (int16_t i=0; i<display.height(); i+=4) {
|
||||
display.drawLine(0, 0, display.width()-1, i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
delay(250);
|
||||
|
||||
display.clearDisplay();
|
||||
for (int16_t i=0; i<display.width(); i+=4) {
|
||||
display.drawLine(0, display.height()-1, i, 0, WHITE);
|
||||
display.display();
|
||||
}
|
||||
for (int16_t i=display.height()-1; i>=0; i-=4) {
|
||||
display.drawLine(0, display.height()-1, display.width()-1, i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
delay(250);
|
||||
|
||||
display.clearDisplay();
|
||||
for (int16_t i=display.width()-1; i>=0; i-=4) {
|
||||
display.drawLine(display.width()-1, display.height()-1, i, 0, WHITE);
|
||||
display.display();
|
||||
}
|
||||
for (int16_t i=display.height()-1; i>=0; i-=4) {
|
||||
display.drawLine(display.width()-1, display.height()-1, 0, i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
delay(250);
|
||||
|
||||
display.clearDisplay();
|
||||
for (int16_t i=0; i<display.height(); i+=4) {
|
||||
display.drawLine(display.width()-1, 0, 0, i, WHITE);
|
||||
display.display();
|
||||
}
|
||||
for (int16_t i=0; i<display.width(); i+=4) {
|
||||
display.drawLine(display.width()-1, 0, i, display.height()-1, WHITE);
|
||||
display.display();
|
||||
}
|
||||
delay(250);
|
||||
}
|
||||
|
||||
void testscrolltext(void) {
|
||||
display.setTextSize(2);
|
||||
display.setTextColor(WHITE);
|
||||
display.setCursor(10,0);
|
||||
display.clearDisplay();
|
||||
display.println("scroll");
|
||||
display.display();
|
||||
|
||||
display.startscrollright(0x00, 0x0F);
|
||||
delay(2000);
|
||||
display.stopscroll();
|
||||
delay(1000);
|
||||
display.startscrollleft(0x00, 0x0F);
|
||||
delay(2000);
|
||||
display.stopscroll();
|
||||
delay(1000);
|
||||
display.startscrolldiagright(0x00, 0x07);
|
||||
delay(2000);
|
||||
display.startscrolldiagleft(0x00, 0x07);
|
||||
delay(2000);
|
||||
display.stopscroll();
|
||||
}
|
||||
|
||||
|
|
@ -1,270 +0,0 @@
|
|||
#ifndef FONT5X7_H
|
||||
#define FONT5X7_H
|
||||
|
||||
#ifdef __AVR__
|
||||
#include <avr/io.h>
|
||||
#include <avr/pgmspace.h>
|
||||
#else
|
||||
#define PROGMEM
|
||||
#endif
|
||||
|
||||
// Standard ASCII 5x7 font
|
||||
|
||||
static const unsigned char font[] PROGMEM = {
|
||||
0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x3E, 0x5B, 0x4F, 0x5B, 0x3E,
|
||||
0x3E, 0x6B, 0x4F, 0x6B, 0x3E,
|
||||
0x1C, 0x3E, 0x7C, 0x3E, 0x1C,
|
||||
0x18, 0x3C, 0x7E, 0x3C, 0x18,
|
||||
0x1C, 0x57, 0x7D, 0x57, 0x1C,
|
||||
0x1C, 0x5E, 0x7F, 0x5E, 0x1C,
|
||||
0x00, 0x18, 0x3C, 0x18, 0x00,
|
||||
0xFF, 0xE7, 0xC3, 0xE7, 0xFF,
|
||||
0x00, 0x18, 0x24, 0x18, 0x00,
|
||||
0xFF, 0xE7, 0xDB, 0xE7, 0xFF,
|
||||
0x30, 0x48, 0x3A, 0x06, 0x0E,
|
||||
0x26, 0x29, 0x79, 0x29, 0x26,
|
||||
0x40, 0x7F, 0x05, 0x05, 0x07,
|
||||
0x40, 0x7F, 0x05, 0x25, 0x3F,
|
||||
0x5A, 0x3C, 0xE7, 0x3C, 0x5A,
|
||||
0x7F, 0x3E, 0x1C, 0x1C, 0x08,
|
||||
0x08, 0x1C, 0x1C, 0x3E, 0x7F,
|
||||
0x14, 0x22, 0x7F, 0x22, 0x14,
|
||||
0x5F, 0x5F, 0x00, 0x5F, 0x5F,
|
||||
0x06, 0x09, 0x7F, 0x01, 0x7F,
|
||||
0x00, 0x66, 0x89, 0x95, 0x6A,
|
||||
0x60, 0x60, 0x60, 0x60, 0x60,
|
||||
0x94, 0xA2, 0xFF, 0xA2, 0x94,
|
||||
0x08, 0x04, 0x7E, 0x04, 0x08,
|
||||
0x10, 0x20, 0x7E, 0x20, 0x10,
|
||||
0x08, 0x08, 0x2A, 0x1C, 0x08,
|
||||
0x08, 0x1C, 0x2A, 0x08, 0x08,
|
||||
0x1E, 0x10, 0x10, 0x10, 0x10,
|
||||
0x0C, 0x1E, 0x0C, 0x1E, 0x0C,
|
||||
0x30, 0x38, 0x3E, 0x38, 0x30,
|
||||
0x06, 0x0E, 0x3E, 0x0E, 0x06,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x5F, 0x00, 0x00,
|
||||
0x00, 0x07, 0x00, 0x07, 0x00,
|
||||
0x14, 0x7F, 0x14, 0x7F, 0x14,
|
||||
0x24, 0x2A, 0x7F, 0x2A, 0x12,
|
||||
0x23, 0x13, 0x08, 0x64, 0x62,
|
||||
0x36, 0x49, 0x56, 0x20, 0x50,
|
||||
0x00, 0x08, 0x07, 0x03, 0x00,
|
||||
0x00, 0x1C, 0x22, 0x41, 0x00,
|
||||
0x00, 0x41, 0x22, 0x1C, 0x00,
|
||||
0x2A, 0x1C, 0x7F, 0x1C, 0x2A,
|
||||
0x08, 0x08, 0x3E, 0x08, 0x08,
|
||||
0x00, 0x80, 0x70, 0x30, 0x00,
|
||||
0x08, 0x08, 0x08, 0x08, 0x08,
|
||||
0x00, 0x00, 0x60, 0x60, 0x00,
|
||||
0x20, 0x10, 0x08, 0x04, 0x02,
|
||||
0x3E, 0x51, 0x49, 0x45, 0x3E,
|
||||
0x00, 0x42, 0x7F, 0x40, 0x00,
|
||||
0x72, 0x49, 0x49, 0x49, 0x46,
|
||||
0x21, 0x41, 0x49, 0x4D, 0x33,
|
||||
0x18, 0x14, 0x12, 0x7F, 0x10,
|
||||
0x27, 0x45, 0x45, 0x45, 0x39,
|
||||
0x3C, 0x4A, 0x49, 0x49, 0x31,
|
||||
0x41, 0x21, 0x11, 0x09, 0x07,
|
||||
0x36, 0x49, 0x49, 0x49, 0x36,
|
||||
0x46, 0x49, 0x49, 0x29, 0x1E,
|
||||
0x00, 0x00, 0x14, 0x00, 0x00,
|
||||
0x00, 0x40, 0x34, 0x00, 0x00,
|
||||
0x00, 0x08, 0x14, 0x22, 0x41,
|
||||
0x14, 0x14, 0x14, 0x14, 0x14,
|
||||
0x00, 0x41, 0x22, 0x14, 0x08,
|
||||
0x02, 0x01, 0x59, 0x09, 0x06,
|
||||
0x3E, 0x41, 0x5D, 0x59, 0x4E,
|
||||
0x7C, 0x12, 0x11, 0x12, 0x7C,
|
||||
0x7F, 0x49, 0x49, 0x49, 0x36,
|
||||
0x3E, 0x41, 0x41, 0x41, 0x22,
|
||||
0x7F, 0x41, 0x41, 0x41, 0x3E,
|
||||
0x7F, 0x49, 0x49, 0x49, 0x41,
|
||||
0x7F, 0x09, 0x09, 0x09, 0x01,
|
||||
0x3E, 0x41, 0x41, 0x51, 0x73,
|
||||
0x7F, 0x08, 0x08, 0x08, 0x7F,
|
||||
0x00, 0x41, 0x7F, 0x41, 0x00,
|
||||
0x20, 0x40, 0x41, 0x3F, 0x01,
|
||||
0x7F, 0x08, 0x14, 0x22, 0x41,
|
||||
0x7F, 0x40, 0x40, 0x40, 0x40,
|
||||
0x7F, 0x02, 0x1C, 0x02, 0x7F,
|
||||
0x7F, 0x04, 0x08, 0x10, 0x7F,
|
||||
0x3E, 0x41, 0x41, 0x41, 0x3E,
|
||||
0x7F, 0x09, 0x09, 0x09, 0x06,
|
||||
0x3E, 0x41, 0x51, 0x21, 0x5E,
|
||||
0x7F, 0x09, 0x19, 0x29, 0x46,
|
||||
0x26, 0x49, 0x49, 0x49, 0x32,
|
||||
0x03, 0x01, 0x7F, 0x01, 0x03,
|
||||
0x3F, 0x40, 0x40, 0x40, 0x3F,
|
||||
0x1F, 0x20, 0x40, 0x20, 0x1F,
|
||||
0x3F, 0x40, 0x38, 0x40, 0x3F,
|
||||
0x63, 0x14, 0x08, 0x14, 0x63,
|
||||
0x03, 0x04, 0x78, 0x04, 0x03,
|
||||
0x61, 0x59, 0x49, 0x4D, 0x43,
|
||||
0x00, 0x7F, 0x41, 0x41, 0x41,
|
||||
0x02, 0x04, 0x08, 0x10, 0x20,
|
||||
0x00, 0x41, 0x41, 0x41, 0x7F,
|
||||
0x04, 0x02, 0x01, 0x02, 0x04,
|
||||
0x40, 0x40, 0x40, 0x40, 0x40,
|
||||
0x00, 0x03, 0x07, 0x08, 0x00,
|
||||
0x20, 0x54, 0x54, 0x78, 0x40,
|
||||
0x7F, 0x28, 0x44, 0x44, 0x38,
|
||||
0x38, 0x44, 0x44, 0x44, 0x28,
|
||||
0x38, 0x44, 0x44, 0x28, 0x7F,
|
||||
0x38, 0x54, 0x54, 0x54, 0x18,
|
||||
0x00, 0x08, 0x7E, 0x09, 0x02,
|
||||
0x18, 0xA4, 0xA4, 0x9C, 0x78,
|
||||
0x7F, 0x08, 0x04, 0x04, 0x78,
|
||||
0x00, 0x44, 0x7D, 0x40, 0x00,
|
||||
0x20, 0x40, 0x40, 0x3D, 0x00,
|
||||
0x7F, 0x10, 0x28, 0x44, 0x00,
|
||||
0x00, 0x41, 0x7F, 0x40, 0x00,
|
||||
0x7C, 0x04, 0x78, 0x04, 0x78,
|
||||
0x7C, 0x08, 0x04, 0x04, 0x78,
|
||||
0x38, 0x44, 0x44, 0x44, 0x38,
|
||||
0xFC, 0x18, 0x24, 0x24, 0x18,
|
||||
0x18, 0x24, 0x24, 0x18, 0xFC,
|
||||
0x7C, 0x08, 0x04, 0x04, 0x08,
|
||||
0x48, 0x54, 0x54, 0x54, 0x24,
|
||||
0x04, 0x04, 0x3F, 0x44, 0x24,
|
||||
0x3C, 0x40, 0x40, 0x20, 0x7C,
|
||||
0x1C, 0x20, 0x40, 0x20, 0x1C,
|
||||
0x3C, 0x40, 0x30, 0x40, 0x3C,
|
||||
0x44, 0x28, 0x10, 0x28, 0x44,
|
||||
0x4C, 0x90, 0x90, 0x90, 0x7C,
|
||||
0x44, 0x64, 0x54, 0x4C, 0x44,
|
||||
0x00, 0x08, 0x36, 0x41, 0x00,
|
||||
0x00, 0x00, 0x77, 0x00, 0x00,
|
||||
0x00, 0x41, 0x36, 0x08, 0x00,
|
||||
0x02, 0x01, 0x02, 0x04, 0x02,
|
||||
0x3C, 0x26, 0x23, 0x26, 0x3C,
|
||||
0x1E, 0xA1, 0xA1, 0x61, 0x12,
|
||||
0x3A, 0x40, 0x40, 0x20, 0x7A,
|
||||
0x38, 0x54, 0x54, 0x55, 0x59,
|
||||
0x21, 0x55, 0x55, 0x79, 0x41,
|
||||
0x22, 0x54, 0x54, 0x78, 0x42, // a-umlaut
|
||||
0x21, 0x55, 0x54, 0x78, 0x40,
|
||||
0x20, 0x54, 0x55, 0x79, 0x40,
|
||||
0x0C, 0x1E, 0x52, 0x72, 0x12,
|
||||
0x39, 0x55, 0x55, 0x55, 0x59,
|
||||
0x39, 0x54, 0x54, 0x54, 0x59,
|
||||
0x39, 0x55, 0x54, 0x54, 0x58,
|
||||
0x00, 0x00, 0x45, 0x7C, 0x41,
|
||||
0x00, 0x02, 0x45, 0x7D, 0x42,
|
||||
0x00, 0x01, 0x45, 0x7C, 0x40,
|
||||
0x7D, 0x12, 0x11, 0x12, 0x7D, // A-umlaut
|
||||
0xF0, 0x28, 0x25, 0x28, 0xF0,
|
||||
0x7C, 0x54, 0x55, 0x45, 0x00,
|
||||
0x20, 0x54, 0x54, 0x7C, 0x54,
|
||||
0x7C, 0x0A, 0x09, 0x7F, 0x49,
|
||||
0x32, 0x49, 0x49, 0x49, 0x32,
|
||||
0x3A, 0x44, 0x44, 0x44, 0x3A, // o-umlaut
|
||||
0x32, 0x4A, 0x48, 0x48, 0x30,
|
||||
0x3A, 0x41, 0x41, 0x21, 0x7A,
|
||||
0x3A, 0x42, 0x40, 0x20, 0x78,
|
||||
0x00, 0x9D, 0xA0, 0xA0, 0x7D,
|
||||
0x3D, 0x42, 0x42, 0x42, 0x3D, // O-umlaut
|
||||
0x3D, 0x40, 0x40, 0x40, 0x3D,
|
||||
0x3C, 0x24, 0xFF, 0x24, 0x24,
|
||||
0x48, 0x7E, 0x49, 0x43, 0x66,
|
||||
0x2B, 0x2F, 0xFC, 0x2F, 0x2B,
|
||||
0xFF, 0x09, 0x29, 0xF6, 0x20,
|
||||
0xC0, 0x88, 0x7E, 0x09, 0x03,
|
||||
0x20, 0x54, 0x54, 0x79, 0x41,
|
||||
0x00, 0x00, 0x44, 0x7D, 0x41,
|
||||
0x30, 0x48, 0x48, 0x4A, 0x32,
|
||||
0x38, 0x40, 0x40, 0x22, 0x7A,
|
||||
0x00, 0x7A, 0x0A, 0x0A, 0x72,
|
||||
0x7D, 0x0D, 0x19, 0x31, 0x7D,
|
||||
0x26, 0x29, 0x29, 0x2F, 0x28,
|
||||
0x26, 0x29, 0x29, 0x29, 0x26,
|
||||
0x30, 0x48, 0x4D, 0x40, 0x20,
|
||||
0x38, 0x08, 0x08, 0x08, 0x08,
|
||||
0x08, 0x08, 0x08, 0x08, 0x38,
|
||||
0x2F, 0x10, 0xC8, 0xAC, 0xBA,
|
||||
0x2F, 0x10, 0x28, 0x34, 0xFA,
|
||||
0x00, 0x00, 0x7B, 0x00, 0x00,
|
||||
0x08, 0x14, 0x2A, 0x14, 0x22,
|
||||
0x22, 0x14, 0x2A, 0x14, 0x08,
|
||||
0xAA, 0x00, 0x55, 0x00, 0xAA,
|
||||
0xAA, 0x55, 0xAA, 0x55, 0xAA,
|
||||
0x00, 0x00, 0x00, 0xFF, 0x00,
|
||||
0x10, 0x10, 0x10, 0xFF, 0x00,
|
||||
0x14, 0x14, 0x14, 0xFF, 0x00,
|
||||
0x10, 0x10, 0xFF, 0x00, 0xFF,
|
||||
0x10, 0x10, 0xF0, 0x10, 0xF0,
|
||||
0x14, 0x14, 0x14, 0xFC, 0x00,
|
||||
0x14, 0x14, 0xF7, 0x00, 0xFF,
|
||||
0x00, 0x00, 0xFF, 0x00, 0xFF,
|
||||
0x14, 0x14, 0xF4, 0x04, 0xFC,
|
||||
0x14, 0x14, 0x17, 0x10, 0x1F,
|
||||
0x10, 0x10, 0x1F, 0x10, 0x1F,
|
||||
0x14, 0x14, 0x14, 0x1F, 0x00,
|
||||
0x10, 0x10, 0x10, 0xF0, 0x00,
|
||||
0x00, 0x00, 0x00, 0x1F, 0x10,
|
||||
0x10, 0x10, 0x10, 0x1F, 0x10,
|
||||
0x10, 0x10, 0x10, 0xF0, 0x10,
|
||||
0x00, 0x00, 0x00, 0xFF, 0x10,
|
||||
0x10, 0x10, 0x10, 0x10, 0x10,
|
||||
0x10, 0x10, 0x10, 0xFF, 0x10,
|
||||
0x00, 0x00, 0x00, 0xFF, 0x14,
|
||||
0x00, 0x00, 0xFF, 0x00, 0xFF,
|
||||
0x00, 0x00, 0x1F, 0x10, 0x17,
|
||||
0x00, 0x00, 0xFC, 0x04, 0xF4,
|
||||
0x14, 0x14, 0x17, 0x10, 0x17,
|
||||
0x14, 0x14, 0xF4, 0x04, 0xF4,
|
||||
0x00, 0x00, 0xFF, 0x00, 0xF7,
|
||||
0x14, 0x14, 0x14, 0x14, 0x14,
|
||||
0x14, 0x14, 0xF7, 0x00, 0xF7,
|
||||
0x14, 0x14, 0x14, 0x17, 0x14,
|
||||
0x10, 0x10, 0x1F, 0x10, 0x1F,
|
||||
0x14, 0x14, 0x14, 0xF4, 0x14,
|
||||
0x10, 0x10, 0xF0, 0x10, 0xF0,
|
||||
0x00, 0x00, 0x1F, 0x10, 0x1F,
|
||||
0x00, 0x00, 0x00, 0x1F, 0x14,
|
||||
0x00, 0x00, 0x00, 0xFC, 0x14,
|
||||
0x00, 0x00, 0xF0, 0x10, 0xF0,
|
||||
0x10, 0x10, 0xFF, 0x10, 0xFF,
|
||||
0x14, 0x14, 0x14, 0xFF, 0x14,
|
||||
0x10, 0x10, 0x10, 0x1F, 0x00,
|
||||
0x00, 0x00, 0x00, 0xF0, 0x10,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
|
||||
0xFF, 0xFF, 0xFF, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0xFF, 0xFF,
|
||||
0x0F, 0x0F, 0x0F, 0x0F, 0x0F,
|
||||
0x38, 0x44, 0x44, 0x38, 0x44,
|
||||
0xFC, 0x4A, 0x4A, 0x4A, 0x34, // sharp-s or beta
|
||||
0x7E, 0x02, 0x02, 0x06, 0x06,
|
||||
0x02, 0x7E, 0x02, 0x7E, 0x02,
|
||||
0x63, 0x55, 0x49, 0x41, 0x63,
|
||||
0x38, 0x44, 0x44, 0x3C, 0x04,
|
||||
0x40, 0x7E, 0x20, 0x1E, 0x20,
|
||||
0x06, 0x02, 0x7E, 0x02, 0x02,
|
||||
0x99, 0xA5, 0xE7, 0xA5, 0x99,
|
||||
0x1C, 0x2A, 0x49, 0x2A, 0x1C,
|
||||
0x4C, 0x72, 0x01, 0x72, 0x4C,
|
||||
0x30, 0x4A, 0x4D, 0x4D, 0x30,
|
||||
0x30, 0x48, 0x78, 0x48, 0x30,
|
||||
0xBC, 0x62, 0x5A, 0x46, 0x3D,
|
||||
0x3E, 0x49, 0x49, 0x49, 0x00,
|
||||
0x7E, 0x01, 0x01, 0x01, 0x7E,
|
||||
0x2A, 0x2A, 0x2A, 0x2A, 0x2A,
|
||||
0x44, 0x44, 0x5F, 0x44, 0x44,
|
||||
0x40, 0x51, 0x4A, 0x44, 0x40,
|
||||
0x40, 0x44, 0x4A, 0x51, 0x40,
|
||||
0x00, 0x00, 0xFF, 0x01, 0x03,
|
||||
0xE0, 0x80, 0xFF, 0x00, 0x00,
|
||||
0x08, 0x08, 0x6B, 0x6B, 0x08,
|
||||
0x36, 0x12, 0x36, 0x24, 0x36,
|
||||
0x06, 0x0F, 0x09, 0x0F, 0x06,
|
||||
0x00, 0x00, 0x18, 0x18, 0x00,
|
||||
0x00, 0x00, 0x10, 0x10, 0x00,
|
||||
0x30, 0x40, 0xFF, 0x01, 0x01,
|
||||
0x00, 0x1F, 0x01, 0x01, 0x1E,
|
||||
0x00, 0x19, 0x1D, 0x17, 0x12,
|
||||
0x00, 0x3C, 0x3C, 0x3C, 0x3C,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00
|
||||
};
|
||||
#endif // FONT5X7_H
|
||||
|
|
@ -1,26 +0,0 @@
|
|||
Software License Agreement (BSD License)
|
||||
|
||||
Copyright (c) 2012, Adafruit Industries
|
||||
All rights reserved.
|
||||
|
||||
Redistribution and use in source and binary forms, with or without
|
||||
modification, are permitted provided that the following conditions are met:
|
||||
1. Redistributions of source code must retain the above copyright
|
||||
notice, this list of conditions and the following disclaimer.
|
||||
2. Redistributions in binary form must reproduce the above copyright
|
||||
notice, this list of conditions and the following disclaimer in the
|
||||
documentation and/or other materials provided with the distribution.
|
||||
3. Neither the name of the copyright holders nor the
|
||||
names of its contributors may be used to endorse or promote products
|
||||
derived from this software without specific prior written permission.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
|
||||
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
|
||||
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
Loading…
Reference in New Issue