1.9 KiB
[
A low cost, DIY friendly Engine Management System (ECU) based on the Arduino framework
Speeduino
The Speeduino project is a flexible, fully featured Engine Management Systems (EMS aka ECU) based on the low cost and open source Arduino platform. It provides the hardware, firmware and software components that make up an engine management system, all provided under open licenses. With over 1000 installations, Speeduino has matured into a product that meets the needs of the hobbyist and enthusiast community without driving prices to the levels of traditional aftermarket ECUs.
Overview
This board is a shield designed to add an automotive connector to the v0.4 series of Speeduino ECUs. It also includes a VR conditioner on board and allows for 12v Hall effect signals (Such as on some GM engines) to be used directly.
The connector used is a Delphi Sicma 39 pin
License
These designs are release under the TAPR Open Hardware License v1.0.
Support
In addition the manual referenced above, Speeduino has a large and very vibrant community of people to help out with your setup or any questions you might add.
Contributors
This project exists thanks to all the people who contribute, both in terms of code and testing provided. If you'd like to get involved, please have a read through Contributing and then jump on Discord to discuss things further