speeduino
/
Hardware
mirror of https://github.com/speeduino/Hardware.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Hardware/VR Conditioner/Latest
History
Josh Stewart 25dfc952c7 Add most of the remaining boards 2021-06-05 23:25:53 +10:00
..
Gerbers Add most of the remaining boards 2021-06-05 23:25:53 +10:00
2021-02-17_17-37-40.lib Add most of the remaining boards 2021-06-05 23:25:53 +10:00
BOM-VR-Conditioner-MAX9926+reg.csv Add most of the remaining boards 2021-06-05 23:25:53 +10:00
BOM-VR-Conditioner-MAX9926+reg.ods Add most of the remaining boards 2021-06-05 23:25:53 +10:00
BOM-octopart-20210223_vr_conditioner_max9926_reg.csv Add most of the remaining boards 2021-06-05 23:25:53 +10:00
MAX9926UAEE&plus_.kicad_mod Add most of the remaining boards 2021-06-05 23:25:53 +10:00
README.md Add most of the remaining boards 2021-06-05 23:25:53 +10:00
VR-Conditioner-MAX9926+reg-B.jpg Add most of the remaining boards 2021-06-05 23:25:53 +10:00
VR-Conditioner-MAX9926+reg-F.jpg Add most of the remaining boards 2021-06-05 23:25:53 +10:00
VR-Conditioner-MAX9926+reg-Schematic.png Add most of the remaining boards 2021-06-05 23:25:53 +10:00
VR-Conditioner-MAX9926+reg-cache.lib Add most of the remaining boards 2021-06-05 23:25:53 +10:00
VR-Conditioner-MAX9926+reg-job.gbrjob Add most of the remaining boards 2021-06-05 23:25:53 +10:00
VR-Conditioner-MAX9926+reg.kicad_pcb Add most of the remaining boards 2021-06-05 23:25:53 +10:00
VR-Conditioner-MAX9926+reg.pro Add most of the remaining boards 2021-06-05 23:25:53 +10:00
VR-Conditioner-MAX9926+reg.sch Add most of the remaining boards 2021-06-05 23:25:53 +10:00
fp-lib-table Add most of the remaining boards 2021-06-05 23:25:53 +10:00
sym-lib-table Add most of the remaining boards 2021-06-05 23:25:53 +10:00

README.md

I hope this helps anyone interested. Anyway, I've done what I can & it's now ready for many eye-balls.

Phill

2021-02-23 I have not made & tested this design but it is barely changed from the manufacrurers data sheets or other designs. If you make & test it then please advise.

I'm new to KiCAD so I don't know how to do some things. Such as how to have an 8-pin set of holes without a 3D chip sitting in it. Or how to do an 8-pin header in the shape & pin count order of a chip.

2021-02-24 Changed version number to 3.5 so that it reflects relative cronology from previous design. Renamed this from Notes.txt to README.md & corrected the date above. Added Comments to schematic, inc. single-sided design allowing 'Letter' postage! Updated BOM in schematic to reflect readily available parts found on OctoPart.

2021-04-22 Goal: give the left 6 passive components some space from the edge. Re-route COUT1 from DIP.8 to SIL.4 in green so no signal traces are by the edge. Shift right 5 components slightly right Shift DIP, chip & hidden cap slightly right Shift left 6 components slightly right Re-route left 6 components to avoid side swapping, keeping the larger SMTs. Ensure GNG plane encircles everything with a via in each corner. Ensure all 'thin' traces are 0.20mm (up from 0.16) Tidy with some symetry.