1.3 KiB
Executable File
I hope this helps anyone interested. Anyway, I've done what I can & it's now ready for many eye-balls.
Phill
2021-02-23 I have not made & tested this design but it is barely changed from the manufacrurers data sheets or other designs. If you make & test it then please advise.
I'm new to KiCAD so I don't know how to do some things. Such as how to have an 8-pin set of holes without a 3D chip sitting in it. Or how to do an 8-pin header in the shape & pin count order of a chip.
2021-02-24 Changed version number to 3.5 so that it reflects relative cronology from previous design. Renamed this from Notes.txt to README.md & corrected the date above. Added Comments to schematic, inc. single-sided design allowing 'Letter' postage! Updated BOM in schematic to reflect readily available parts found on OctoPart.
2021-04-22 Goal: give the left 6 passive components some space from the edge. Re-route COUT1 from DIP.8 to SIL.4 in green so no signal traces are by the edge. Shift right 5 components slightly right Shift DIP, chip & hidden cap slightly right Shift left 6 components slightly right Re-route left 6 components to avoid side swapping, keeping the larger SMTs. Ensure GNG plane encircles everything with a via in each corner. Ensure all 'thin' traces are 0.20mm (up from 0.16) Tidy with some symetry.