docs: update configuration/Nitrous_Control

This commit is contained in:
Administrator 2020-03-19 03:56:06 +00:00 committed by Josh Stewart
parent 30b030258f
commit a61463222a
1 changed files with 4 additions and 2 deletions

View File

@ -2,7 +2,7 @@
title: Nitrous Control
description:
published: true
date: 2020-03-19T02:44:21.875Z
date: 2020-03-19T03:56:03.494Z
tags: n2o, nitrous, tuning
---
@ -10,8 +10,8 @@ tags: n2o, nitrous, tuning
Speeduino contains a 2 step nitrous control system for controlling valves and making fueling adjustments for dry setups.
The 2 stages operate independantly and can overlap (ie both run at the same time) if needed.
![nitrous_settings.png](/img/accessories/nitrous_settings.png){.align-center width=450}
## Activation Settings
- **Nitrous Mode:** Whether 1 or 2 stages will be used
- **Arming Pin:** The Arduino Pin to be used for arming the nitrous control.
@ -20,7 +20,9 @@ The 2 stages operate independantly and can overlap (ie both run at the same time
- **Minimum TPS:** The minimum TPS that the stage will activate at
- **Maximum MAP:** A protection to ensure that the nitrous will not activate above a certain level of boost
- **Leanest AFR:** Nitrous will only activate if the AFR is (And remains) below this value
## Stage Settings
The settings for each stage are identical and allow for the 2 stages to run individually or joinly overlapping during a given RPM window.
- **Nitrous output Pin:** The (Arduino) pin that will be driven high when the stage is active.