mirror of https://github.com/speeduino/wiki.js.git
1.1 KiB
1.1 KiB
| title | description | published | date | tags | editor | dateCreated |
|---|---|---|---|---|---|---|
| Chrysler NGC | Decoder for engines with the Chrysler NGC pattern | true | 2021-10-12T16:19:05.254Z | markdown | 2021-10-12T16:19:05.254Z |
Chrysler NGC (untested)
Overview
Decoder for 4-cylinder engines equipped with the Chrysler NGC pattern. Seems to be used on some Chrysler/Jeep/Dodge vehicles from 2002 onward.
This decoder has only been tested on a simulator, please notify speeduino maintainers if you have success or issues with it.
Tuner Studio Configuration
- Trigger Pattern: Chrysler NGC
- Trigger Angle: Should be set to 30 +- a few degrees for a stock setup. If both crank and cam sensors have reversed polarity -330 should work (for sequential).
- New ignition mode: On is recommended as it gives a more accurate spark angle.
Trigger Signal
This a 36+2-2 tooth wheel paired with a 7 tooth cam.
The crank wheel has 2 normal LOW missing teeth where the opposite side has two HIGH missing teeth.
The cam wheel teeth are mirrored. One side has a long HIGH tooth and the other has a long LOW tooth.
