mirror of https://github.com/speeduino/wiki.js.git
1.2 KiB
1.2 KiB
Overview
Speeduino has an on board closed loop boost controller than can be used to regulate standard single turbo setups.
Most 3 or 4 port boost solenoids can be used, with frequencies between 15Hz and 500Hz supported. Any of the on board high current outputs can be directly connected to the solenoid and is controlled via a boost target table and PID tuning. Over boost limiting is also available.
Settings
Speeduino's boost control uses a PID algorithm with 2 modes of operation, Simple and Full. Each has their own advantages and disadvantages, as outlined below
Target table
![](https://raw.githubusercontent.com/speeduino/wiki/master/accessories/boost_map.png)