speeduino
/
wiki.js
mirror of https://github.com/speeduino/wiki.js.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
wiki.js/configuration/Thermo_fan.md

1.1 KiB
Raw Blame History

title description published date tags editor dateCreated
Thermo fan Control of a cooling fan relay true 2020-04-08T02:08:38.313Z undefined 2020-01-14T02:17:03.743Z

Thermo fan

Control of a cooling (thermo) fan is available through the Thermo fan dialog.

Note that only On/Off fan control is currently possible (Not fan speed control using PWM). {.is-info}

Settings

fan.png{.align-center width=450}

  • Fan mode - Currently only On/Off mode is supported
  • Output pin - The arduino pin that the fan control will use. In most cases this should be left as Board Default
  • Output inverted - Most setups will use No for this setting, but if you have a fan circuit that flips the output, the On/Off polarity can be reversed with this setting
  • Fan temperature - The temperature above which the fan will be turned on.
  • Fan hysteresis - The number of degrees below the fan set point that fan will be turned off. This is used to avoid oscillation around the set point resulting in the fan turning on and off rapidly.