mirror of https://github.com/speeduino/wiki.js.git
16 lines
887 B
Markdown
16 lines
887 B
Markdown
---
|
|
title: Fuel pump
|
|
description: Setting the on/off conditions of the fuel pump
|
|
published: true
|
|
date: 2020-01-16T14:17:07.764Z
|
|
tags: aux outputs, tuning
|
|
---
|
|
|
|
# Fuel pump
|
|
Fuel pump control is a simple but important function performed by the ECU. Currently Speeduino does not perform variable (PWM) pump control, but
|
|
|
|
## Settings
|
|
![fuel_pump.png](/img/accessories/fuel_pump.png){.align-center width=480}
|
|
|
|
* **Fuel pump pin** - The Arduino pin that the fuel pump output is on. In most cases this should be left to `Board Default` unless you have a specific reason to change this.
|
|
* **Prime duration** - How long (In seconds) the fuel pump should run when the system is first powered up. Note that this is triggered **when the ECU is powered on**, which will not always be the same as when the ignition is turned out. If you have a USB cable connected then the ECU is already powered up. |