zec
/
zcash-docs
mirror of https://github.com/zcash/zcash-docs.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
zcash-docs/en/Sprout_User_Guide.md

12 KiB
Raw Blame History

Zcash 1.0 "Sprout" Guide

Welcome! This guide is intended to get you running on the official Zcash network. Zcash currently has some limitations: it only officially supports Linux, requires 64-bit, and in some situations requires heavy memory and CPU consumption to create transactions.

Please let us know if you run into snags. We plan to make it less memory/CPU intensive and support more architectures and operating systems in the future.

Upgrading?

If you were playing with our alpha/beta/rc testnets, ensure that your ~/.zcash/zcash.conf does not contain testnet=1 or addnode=testnet.z.cash. If you're on a Debian-based distribution, you can follow the Debian instructions to install zcash on your system. Otherwise, you can update your local snapshot of our code:

git fetch origin
git checkout v1.0.8-1
./zcutil/fetch-params.sh
./zcutil/build.sh --disable-rust -j$(nproc)

Note: if you don't have nproc, then substitute the number of cores on your system. If the build runs out of memory, try again without the -j argument, i.e. just ./zcutil/build.sh --disable-rust.

If you are upgrading from testnet, make sure that your ~/.zcash directory contains only zcash.conf to start with.

If the build fails, move aside your zcash directory and try again by following the instructions in the Compile it yourself section below.

A quick note about terminology

Zcash supports two different kinds of addresses, a z-addr (which begins with a z) is an address that uses zero-knowledge proofs and other cryptography to protect user privacy. There are also t-addrs (which begin with a t) that are similar to Bitcoin's addresses.

Requirements

Currently, you will need:

  • Linux (easiest with a Debian-based distribution)
  • 64-bit
  • 4GB of free memory

The interfaces are a commandline client (zcash-cli) and a Remote Procedure Call (RPC) interface, which is documented here:

https://github.com/zcash/zcash/blob/v1.0.8-1/doc/payment-api.md

Security

Before installing, upgrading, or running zcash, ensure you have checked for any security issues. Please See our Security page:

https://z.cash/support/security.html

Get started

Binary packages for Debian-based operating systems

Follow the instructions here: https://github.com/zcash/zcash/wiki/Debian-binary-packages

Or, Compile it yourself

Install dependencies

On Ubuntu/Debian-based systems:

$ sudo apt-get install \
      build-essential pkg-config libc6-dev m4 g++-multilib \
      autoconf libtool ncurses-dev unzip git python python-zmq \
      zlib1g-dev wget bsdmainutils automake

On Fedora-based systems:

$ sudo dnf install \
      git pkgconfig automake autoconf ncurses-devel python \
      python-zmq wget gtest-devel gcc gcc-c++ libtool patch

On RHEL-based systems (including Scientific Linux):

  • Install devtoolset-3 and autotools-latest (if not previously installed).
  • Run scl enable devtoolset-3 'scl enable autotools-latest bash' and do the remainder of the build in the shell that this starts.

Check gcc version

gcc/g++ 4.9 or later is required. Use g++ --version to check which version you have.

On Ubuntu Trusty, you can install gcc/g++ 4.9 as follows:

$ sudo add-apt-repository ppa:ubuntu-toolchain-r/test
$ sudo apt-get update
$ sudo apt-get install g++-4.9

Fetch the software and parameter files

Fetch our repository with git and run fetch-params.sh like so:

$ git clone https://github.com/zcash/zcash.git
$ cd zcash/
$ git checkout v1.0.8-1
$ ./zcutil/fetch-params.sh

This will fetch our Sprout proving and verifying keys (the final ones created in the Parameter Generation Ceremony), and place them into ~/.zcash-params/. These keys are just under 911MB in size, so it may take some time to download them.

The message printed by git checkout about a "detached head" is normal and does not indicate a problem.

Build

Ensure you have successfully installed all system package dependencies as described above. Then run the build, e.g.:

$ ./zcutil/build.sh --disable-rust -j$(nproc)

This should compile our dependencies and build zcashd. (Note: if you don't have nproc, then substitute the number of cores on your system. If the build runs out of memory, try again without the -j argument, i.e. just ./zcutil/build.sh --disable-rust. )

Note (25 April 2017): if you experience build issues with recent master (after 1.0.8 and v1.0.8-1), try passing the flag --disable-proton to ./zcutil/build.sh.

Testing

The tests take a while to run and may require up to 8GB of RAM. If you would rather get started right away, you can skip to the next section. If you want to run the tests to make sure Zcash is working, run:

$ ./qa/zcash/full-test-suite.sh

You can also run the RPC tests, which take much longer:

$ ./qa/pull-tester/rpc-tests.sh

The tests need a lot of memory to run successfully. An out-of-memory error will usually cause a FAIL or ERROR outcome with "std::bad_alloc" somewhere in the output.

Configuration

Create the ~/.zcash directory and place a configuration file at ~/.zcash/zcash.conf using the following commands:

mkdir -p ~/.zcash
echo "addnode=mainnet.z.cash" >~/.zcash/zcash.conf
echo "rpcuser=username" >>~/.zcash/zcash.conf
echo "rpcpassword=`head -c 32 /dev/urandom | base64`" >>~/.zcash/zcash.conf

Note that this will overwrite any zcash.conf settings you may have added from testnet. (If you want to run on testnet, you can retain a zcash.conf from testnet.) To run on mainnet, make sure that the testnet=1 and addnode=betatestnet.z.cash settings are removed; use addnode=mainnet.z.cash instead. We strongly recommend that you use a random password to avoid potential security issues with access to the RPC interface.

If you wish to run zcashd on testnet, change the lines in zcash.conf indicating the network and node discovery: testnet=1 instead of mainnet=1 and addnode=testnet.z.cash instead of addnode=mainnet.z.cash.

Enabling CPU mining:

If you want to enable CPU mining, run these commands:

$ echo 'gen=1' >> ~/.zcash/zcash.conf
$ echo "genproclimit=-1" >> ~/.zcash/zcash.conf

Setting genproclimit=-1 mines on the maximum number of threads possible on your CPU. If you want to mine with a lower number of threads, set genproclimit equal to the number of threads you would like to mine on.

The default miner is not efficient, but has been well reviewed. To use a much more efficient but unreviewed solver, you can run this command:

$ echo 'equihashsolver=tromp' >> ~/.zcash/zcash.conf

Note, you probably want to read the Mining-Guide to learn more mining details.

Running Zcash:

Now, run zcashd!

$ ./src/zcashd

To run it in the background (without the node metrics screen that is normally displayed) use ./src/zcashd --daemon.

You should be able to use the RPC after it finishes loading. Here's a quick way to test:

$ ./src/zcash-cli getinfo

NOTE: If you are familiar with bitcoind's RPC interface, you can use many of those calls to send ZEC between t-addr addresses. We do not support the 'Accounts' feature (which has also been deprecated in bitcoind) — only the empty string "" can be used as an account name.

NOTE: The main network node at mainnet.z.cash is also accessible via Tor hidden service at zcmaintvsivr7pcn.onion.

To see the peers you are connected to:

$ ./src/zcash-cli getpeerinfo

Using Zcash

First, you want to obtain Zcash. You can purchase them from an exchange, from other users, or sell goods and services for them! Exactly how to obtain Zcash (safely) is not in scope for this document, but you should be careful. Avoid scams!

Generating a t-addr

Let's generate a t-addr first.

$ ./src/zcash-cli getnewaddress
t14oHp2v54vfmdgQ3v3SNuQga8JKHTNi2a1

Receiving Zcash with a z-addr

Now let's generate a z-addr.

$ ./src/zcash-cli z_getnewaddress
zcBqWB8VDjVER7uLKb4oHp2v54v2a1jKd9o4FY7mdgQ3gDfG8MiZLvdQga8JK3t58yjXGjQHzMzkGUxSguSs6ZzqpgTNiZG

This creates a private address and stores its key in your local wallet file. Give this address to the sender!

A z-addr is pretty large, so it's easy to make mistakes with them. Let's put it in an environment variable to avoid mistakes:

$ ZADDR='zcBqWB8VDjVER7uLKb4oHp2v54v2a1jKd9o4FY7mdgQ3gDfG8MiZLvdQga8JK3t58yjXGjQHzMzkGUxSguSs6ZzqpgTNiZG'

To get a list of all addresses in your wallet for which you have a spending key, run this command:

$ ./src/zcash-cli z_listaddresses

You should see something like:

[
    "zcA6qngiR3U7HxYopyTWkaDLwYBd83D5MT7Jb9gpgTzPLMZytzRbtdPP1Syv4RvRgHeoZrJWSask3DyfwXG9DGPMWMvX7aC",
    "zcBqWB8VDjVER7uLKb4oHp2v54v2a1jKd9o4FY7mdgQ3gDfG8MiZLvdQga8JK3t58yjXGjQHzMzkGUxSguSs6ZzqpgTNiZG"
]

Great! Now, send your z-addr to the sender. You should eventually see their transaction when checking:

$ ./src/zcash-cli z_listreceivedbyaddress "$ZADDR"

[
    {
        "txid" : "af1665b317abe538148114a45322f28151925501c081949cc7a5207ef21cb750",
        "amount" : 1.23,
        "memo" : "48656c6c6f20ceb2210000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000"
    }
]

Sending coins with your z-addr

If someone gives you their z-addr...

$ FRIEND='zcCDe8krwEt1ozWmGZhBDWrcUfmK3Ue5D5z1f6u2EZLLCjQq7mBRkaAPb45FUH4Tca91rF4R1vf983ukR71kHyXeED4quGV'

You can send 0.8 ZEC by doing...

$ ./src/zcash-cli z_sendmany "$ZADDR" "[{\"amount\": 0.8, \"address\": \"$FRIEND\"}]"

After waiting about a minute, you can check to see if the operation has finished and produced a result:

$ ./src/zcash-cli z_getoperationresult

[
    {
        "id" : "opid-4eafcaf3-b028-40e0-9c29-137da5612f63",
        "status" : "success",
        "creation_time" : 1473439760,
        "result" : {
            "txid" : "3b85cab48629713cc0caae99a49557d7b906c52a4ade97b944f57b81d9b0852d"
        },
        "execution_secs" : 51.64785629
    }
]

Additional operations for zcash-cli

As Zcash is an extension of bitcoin, zcash-cli supports all commands that are part of the Bitcoin Core API (as of version 0.11.2), https://en.bitcoin.it/wiki/Original_Bitcoin_client/API_calls_list

For a full list of new commands that are not part of bitcoin API (mostly addressing operations on z-addrs) see https://github.com/zcash/zcash/blob/master/doc/payment-api.md

To list all zcash commands, use ./src/zcash-cli help.

To get help with a particular command, use ./src/zcash-cli help <command>.

Known Security Issues

Each release contains a ./doc/security-warnings.md document describing security issues known to affect that release. You can find the most recent version of this document here:

https://github.com/zcash/zcash/blob/master/doc/security-warnings.md

Please also see our security page for recent notifications and other resources:

https://z.cash/support/security.html