This way you can use the console/TunerStudio with the ST-Link
In the process, combine TS_PRIMARY_UART and TS_PRIMARY_SERIAL into TS_PRIMARY_PORT, to make UART vs
SERIAL selection more robus. Ditto for TS_SECONDARY_*. Also change use of TS_NO_PRIMARY to be #if
not #ifdef, so that it can be properly set as a compile flag and not be overwritten by various
header files.
* Makefile: define BOOTLOADER=1 for linker in case of OpenBLT too
This will reserve first 32K of flash for bootloader.
* OpenBLT: include into build
* board: subaru eg33: add OpenBLT board code
* board: subaru eg33: use OpenBLT
* Board: Subaru EG33: OpenBLT: reuse HAL and CMSIS from OpenBLT submodule
* Board: Subaru EG33: OpenBLT: reuse linker file from OpenBLT too
* OpenBLT for MRE
* OpenBLT: MRE: adjust LD memory map for smallest variat of MCU on MRE
* OpenBLT: enable for MRE
* OpenBLT: disable CRC check of user application
This allows us to use DFU tool to flash main application too.
* hex2dfu: fresh binary for linux
* OpenBLT: extract common part of OpenBLT makefiles to openblt.mk
* OpenBLT: enable CRC check of user application for MRE and EG33
CRC (actually just a summ) of few first vectors is stored at 0x1c
offset. This is reserved vector for Cortex-M3, M4 and M7
* common_make: append OpenBLT CRC to dfu files
This should allow to use DFU to do main application update when
when OpenBLT is used as bootloader. hex2dfu will store same
styled CRC as OpenBLT expects to see in user app.
* OpenBLT reorganization
Move common stuff to hw_layer/ports/
* OpenBLT: proteus
* Proteus: enable OpenBLT for F4 and F7
Compilation tested only
* big pch energy
* put back ramdisk stub
* tests are happy
* h743 nucleo
* kinetis
* I love deleting code!
* make stepper happy
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* ignore
* set up precompiled header
* makefile
* fixes
* cleanup
* only depend cpp on pch
* efifeatures in pch
* f7 efifeatures
* consolidate
* simulator
* proteus build
* error handling is a good one
* bootloader pch
* don't auto include pch
* dirs
* delete on clean
* bootloader cleans
* clean.sh deletes pch
* disable in bl for now
* there was a typo so maybe it'll work now
* remove todo
* don't need that any more
* don't need these parts
* don't need this part
* undo changes
* use a different cpp as example
* s
* Revert "cleanup"
This reverts commit 8de8698490f5d09c2df753f00a89751aa898be9a.
* also unnecessary now
* buh
* comment
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* new function
* hellen
* MRE
* proteus
* put those function declarations in a reasonable place
* put the comment back
* weak
* move that to a reasonable place
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* rusefi_halconf
* h7 gpt
* don't redefine that
* maybe this was necessary
* format
* no usb in cypress
* flags for bl
* cypress
* maybe bootloader
* no smart build for cypress/kinetis
* no smart build
* no really, disable smart build
* don't need to clean that env var
* cypress
* format
* move f4 config files
* don't need this
* f7
* f7
* h7
* this was duplicated
* turn off smart build
* loader too
* update prometheus paths
* bootloader should include confdir
* fix the flash size while we're at it
* move chconf_common
* use wait
* normalize board.mk
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* set mcu type in hw_ports
* move f4 linker script
* move f7 linker script
* don't set default linker file in makefiles
* extra line
* prometheus actually didn't depend on anything special for f469
* dead line
* h7
* dead
* move board.c
* set explicit cpu type for simulator
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* set mcu type in hw_ports
* move f4 linker script
* move f7 linker script
* don't set default linker file in makefiles
* extra line
* prometheus actually didn't depend on anything special for f469
* dead line
* h7
* dead
* frankenso config
* Revert "frankenso config"
This reverts commit 5bb2375ba2d33ae487273eaa5b7a4f12e8a9cecc.
* add hardware CI flag for proteus
* rename ci job
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* Proper way to add lis302 driver
* Proper way to add license directory to includes
* Makefile: simplify
All ChibiOS stuff is accumulated in ALLCSRC, ALLINC and so on.
* board.mk: append sources and includes to ALLSRC, ALLCPPSRC, ALLINC
* Cypress: fix CANv2 includence into build
rusefillc
Matthew Kennedy
GitHub build-firmware Action
David Holdeman
NMSTEC
Andrey G
Andrey
Scott Smith