2208bcbc5b
Add define for ARDUINO_ARCH_STM32 to correspond with the official STM core and also with Adadfuit STM32 products
2018-05-23 19:37:08 +10:00
6548456957
Change Wire.write() return types from void to size_t to be compatible with the Arduino API
2018-05-23 18:03:38 +10:00
6a551bd9ab
Ranemed FreeRTOS to FreeRTOS701 to prevent name clashes. see https://github.com/rogerclarkmelbourne/Arduino_STM32/issues/500
2018-05-22 09:29:23 +10:00
8fa6bb4596
Remove redundant #if'ed out code from maple hardware_serial.cpp
2018-05-11 09:03:04 +10:00
4ec1b0f0cd
Removed references to robotis bootloader, and also redundant usb reset code that used the wdt (possibly used by the robotis bootloader)
2018-05-10 20:25:02 +10:00
6c33d73f63
Add SDIO pin definitions to the Maple RET6 variant
...
It was missing, but needed since that variant (RET6) includes the SDIO peripheral, so the files are included in the compilation.
2018-05-03 11:39:17 -05:00
6345cd6e6e
Merge branch 'Allow-IRQ-overriding' of https://github.com/edogaldo/Arduino_STM32 into edogaldo-Allow-IRQ-overriding
2018-04-29 10:37:19 +10:00
e1ae43c826
Fixed missing return value.
2018-04-27 14:48:41 +01:00
1abb3f1ca5
Update Wire.cpp
...
bugfix hw I2C unrecognized addresses 0x76, 0x77
2018-04-25 23:22:17 +02:00
cb8b30bd6f
add partial support for the new USB HID bootloader
2018-04-22 17:06:22 +10:00
5664dbc7aa
Add hold in bootloader using bkp register 10
2018-04-22 14:31:56 +10:00
b2858b8c27
Merge branch 'shorten_path' of https://github.com/fpistm/Arduino_STM32 into fpistm-shorten_path
2018-04-19 17:46:35 +10:00
b16686a06a
Allow IRQ overriding
2018-04-17 11:19:36 +02:00
d33e50ab0d
Update BluePill-RTClock-test.ino
...
fix weekday, see #498 .
2018-04-13 23:42:46 +02:00
479cfc1fb4
Removed unused ErrorStatus enum from usb_type.h as its redundant and the definition of SUCCESS clashed with other definitions
2018-04-13 16:47:15 +10:00
4f691b9eeb
Add support for boards with 16MHz HSE crystal. Note to use this feature users must add -D XTAL16M to the appropriate build options in boards.txt, as there are too few boards with 16MHz crystals to warrant adding this as a separate menu to each board in boards.txt
2018-04-13 16:32:56 +10:00
b1a4fda793
Merge branch 'master' of https://github.com/KenWillmott/Arduino_STM32 into KenWillmott-master
2018-04-13 16:03:29 +10:00
1f85ecb3b9
Added PLL Mulplier setting for 16MHz. Note this change does not add 16Mhz menu options to any boards, it simply supports them if they were added
2018-04-13 15:03:03 +10:00
7ef6e71a78
Add flash wait state optimisation from @tomtor
2018-04-13 14:52:55 +10:00
44f617bc9c
Merge pull request #485 from f6fvy/patch-1
...
Frequency unit typo (was Mhz instead of MHz)
2018-04-13 14:18:15 +10:00
df96076900
Added missing F103V linker file, included in https://github.com/rogerclarkmelbourne/Arduino_STM32/pull/489
2018-04-13 14:10:49 +10:00
314ce02bd0
Merge branch 'sdio-updates' of https://github.com/victorpv/Arduino_STM32 into victorpv-sdio-updates
2018-04-13 13:48:10 +10:00
0197d63dc0
Multiple updates to SDIO library
...
Changes __io for __IO
Increase the time for some delays
Adds compatibility with SdSdioEX class while using DMA
Implement a retry mechanism (needs further testing)
Implement command ACMD42 to disconnect the sd internal pullup in D3 in
4bit mode
2018-04-12 22:30:37 -05:00
18d1654195
usbcomposite library
2018-04-12 20:45:59 -05:00
f56c37e97e
Fix for https://github.com/rogerclarkmelbourne/Arduino_STM32/issues/486
2018-04-12 18:17:45 +10:00
c9a694b779
Revert #491
2018-04-12 17:59:03 +10:00
407df21dfb
Update timer.h
...
fix for dfb5bd4c30#412 [https://github.com/rogerclarkmelbourne/Arduino_STM32/issues/412 ]
2018-04-12 08:29:49 +02:00
7374108bd4
fix PR#487 and #488
2018-04-10 10:37:26 -04:00
463db9b0bf
fix PR #487
...
Implements the needed correction in PR #487 , modifies get method with no change to set method. Exor comparison changed to equality comparison for readability.
2018-04-10 09:55:04 -04:00
307a0e2472
Frequency unit typo (was Mhz instead of MHz)
2018-04-09 19:16:56 +02:00
596dc0d78e
Merge pull request #461 from tfry-git/work/gfx_as
...
Base Adafruit_GFX_AS on Adafruit_GFX, keeping only the additions in a derived class.
2018-04-08 13:39:50 +10:00
0e17c642a0
Merge pull request #480 from edogaldo/Fix-SCB_AIRCR_PRIGROUP
...
Fix SCB_AIRCR_PRIGROUP
2018-04-08 13:35:13 +10:00
ef2f5b53d7
Need to define STM32_HAVE_FSMC as 0
...
Forgot to include that.
2018-04-05 22:04:28 -05:00
21bdc4ad13
Update to fix FSMC inclusion in Rx devices
...
The FSMC is only available in high density and XL density devices with more than 4 ports.
Basically excluded in the RC/D/E/F/G models, since they dont have enough pins.
Page 11 in the Datasheet references this. The table shows what is present, and shows the FSMC is NOT present in Rx MCUs:
http://www.st.com/content/ccc/resource/technical/document/datasheet/59/f6/fa/84/20/4e/4c/59/CD00191185.pdf/files/CD00191185.pdf/jcr:content/translations/en.CD00191185.pdf
Recent changes to other files highlight this issue during compilation time. The issue was already there, but GPIO E and GPIO F were declared and defined, while they don't actually exist in Rx MCUs, so FSMC was being included for those MCU even though they don't actually have an FSMC device, or at least no external ports to use it.
With the recent changes GPIO E and F and correctly excluded from the build, but since FSMC was still included and needs GPIO E and F, it was failing to compile. I.e.:
C:/Users/Victor/Documents/Arduino/Hardware/Arduino_STM32/STM32F1/cores/maple/libmaple/fsmc_f1.c:51:19: error: 'GPIOE' undeclared (first use in this function)
Since the FSMC is not available (I suspect the silicon is there, but there is no IO pins to use it), the correct solution is to include FSMC only when using an MCU with more than 4 GPIO ports, which is what matches the datasheet.
2018-04-05 21:54:05 -05:00
f660163a6f
Fix SCB_AIRCR_PRIGROUP
...
As per Issue #479
2018-04-04 16:04:42 +02:00
17248cd803
Merge branch 'master' of https://github.com/MackPI/Arduino_STM32 into MackPI-master
2018-04-01 16:29:21 +10:00
9128a78265
Merge branch 'KenWillmott-patch-1' of https://github.com/KenWillmott/Arduino_STM32 into KenWillmott-KenWillmott-patch-1
2018-04-01 16:27:26 +10:00
7aeb8ccefe
Merge branch 'work/xpt2046' of https://github.com/tfry-git/Arduino_STM32 into tfry-git-work/xpt2046
2018-04-01 16:14:17 +10:00
9fcd06e879
Merge branch 'stevstrong-patch-7'
2018-04-01 15:48:28 +10:00
a05944eda8
Merge branch 'patch-7' of https://github.com/stevstrong/Arduino_STM32
2018-04-01 15:30:59 +10:00
d94f864979
Merge branch 'SDIO_patch' of https://github.com/victorpv/Arduino_STM32 into victorpv-SDIO_patch
2018-04-01 15:26:04 +10:00
b2bd7b9872
Merge branch 'STM_FFT' of https://github.com/victorpv/Arduino_STM32 into victorpv-STM_FFT
2018-04-01 15:16:52 +10:00
845508ee19
Merge branch 'aster94-master'
2018-04-01 15:03:36 +10:00
59a216ba66
Help file describing the fft functions.
2018-03-29 22:19:06 -05:00
178cd5529e
Merge pull request #468 from stevstrong/patch-13
...
Update platform.txt - Reduces line length of build output message
2018-03-29 18:34:26 +11:00
d5399c3e02
Revert "Hardware serial corrections"
...
This reverts commit 771be821c2
2018-03-28 22:27:50 -05:00
e3510b76eb
Revert "SDIO updates"
...
This reverts commit 7dce451ebc
2018-03-28 22:27:39 -05:00
5c3c9af241
Revert "Hardware serial corrections"
...
This reverts commit 771be821c2
2018-03-28 22:23:41 -05:00
c693d0038e
Some more SDIO corrections and improvements
2018-03-28 22:19:47 -05:00
58ccf76c2a
stm_fft library
...
With extra fft 16 bins function
2018-03-28 22:01:48 -05:00
Roger Clark
victorpv
André
stevstrong
edogaldo
arpruss
Ken Willmott
Laurent Haas - F6FVY