ac27993d10
Added makeWord macro and functions to fix #316
2017-07-31 13:33:00 +10:00
7d1119ee34
Removed Debug with LTO optimisation option, to fix issue #320
2017-07-31 10:56:31 +10:00
14ddcfd97d
Changed text on 128Mhz CPU speed option - to add warning that there is No USB and also Manual reset needed to upload
2017-07-31 10:51:52 +10:00
375a8f84b5
Fixed typo in F1 boards.txt for STM32F103CB RAM size
2017-07-30 20:08:20 +10:00
cb901b4e4f
Added CPU Speed menu to all boards except Nucleo RB, with additional entry for 128Mhz Turbo - NO USB. Note only tested on the Blue Pill
2017-07-30 17:43:40 +10:00
7aae010eae
Fixed yet another of my typos in the optimisation menu
2017-07-30 17:05:57 +10:00
86d823a3b5
Fixed typo in optimisation menu
2017-07-30 16:21:26 +10:00
0aae3d31f1
Changed order of optimisation options, so that current settings (-Os) are the default, and reverted F4 and F3 boards.txt to current master to remove these changes from those boards, as they will need to be updated in the same way I did for the F1, and I don't have time to do it now
2017-07-30 16:07:30 +10:00
0696f70148
Merge branch 'mtiutiu/compiler_opts_menus' of https://github.com/mtiutiu/Arduino_STM32 into mtiutiu-mtiutiu/compiler_opts_menus
2017-07-30 10:26:52 +10:00
0db43ae36f
SPI clean up + add 16 bit access functions in 8 bit mode
2017-07-28 17:51:54 +02:00
6b85615221
Change Wire endTransmission to have bool instead of unit8 argument - to match with the Arduino API
2017-07-20 17:43:13 +10:00
4bfb444447
added teensy like ide compiler opts menus
2017-07-17 10:35:23 +03:00
43299e4544
Merge pull request #236 from Testato/patch-1
...
Update F1 boards.txt to address memory size display issues
2017-07-16 17:18:53 +10:00
b5eadb8409
Merge pull request #312 from victorpv/SPI-Callbacks
...
Added Spi callbacks from @victorpv
2017-07-16 08:54:18 +10:00
0f3c6e5854
Merge pull request #278 from syfre/master
...
Enhancements and fixes to use ADC in continuous mode triggered by an internal timer
2017-07-16 08:45:38 +10:00
0393be3400
Added setClock() to Wire and Hardware - only 100000Hz and 400000Hz are supported
2017-07-15 18:31:02 +10:00
910072c7db
Changes tabs for spaces.
2017-07-10 12:08:59 -05:00
b892004cc2
Add files via upload
2017-07-10 12:00:29 -05:00
fd95b99914
Added readBytes function to usbSerial
...
Add Arduino USB implementation of Arduino Stream class readBytes, which reads bytes in blocks with a timeout.
Increases the speed from 300KB/s to 500KB/s over the Stream class readBytes function.
2017-07-08 10:52:50 -05:00
1c07e25bd7
Update usb_serial.h
2017-07-08 10:49:14 -05:00
8683035cb7
Update usb_serial.h
2017-07-08 10:46:49 -05:00
8b2699bdba
Merge branch 'master' of https://github.com/rogerclarkmelbourne/Arduino_STM32
2017-07-06 10:57:55 +10:00
54dd788f2b
Fix warning caused by commit #f7a576f2e0efcee958bdfd737d9af7a2f6c76051
2017-07-06 10:57:20 +10:00
385dfbf29c
Merge pull request #270 from SukkoPera/Fix-ifSerial
...
Added "if serial" and deprecated isConnected()
2017-07-06 08:36:20 +10:00
1189a3569c
Merge pull request #276 from lacklustrlabs/Adafruit_SSD1306_STM32_swap
...
Add swap() function to ssd1306_128x64_i2c_STM32 as example would not build…
2017-07-04 08:39:56 +10:00
d4103b8cd1
Merge pull request #294 from tomtor/fix-doc
...
Fix documentation for usart_putc()
2017-07-03 15:36:23 +10:00
6891e40546
Merge pull request #288 from MicroBahner/pinmodeTimer
...
Added Pinmode timer fix by @MicroBahner
2017-07-03 15:35:30 +10:00
bd8ef73bef
Merge pull request #302 from bmarquismarkail/rcmclone
...
Adding i2C repeated start condition from @bmarquismarkail
2017-07-03 15:31:45 +10:00
e4f598683c
Merge pull request #262 from victorpv/timer_dma
...
Timer dma from @victorpv
2017-07-03 15:30:14 +10:00
2dbf8b72c3
Merge pull request #261 from victorpv/FreeRTOS900
...
Added Free rtos900 from @victorpv
2017-07-03 15:29:23 +10:00
54044592fb
changing comment
2017-06-26 18:59:33 -05:00
80339e6073
checking out work from master
2017-06-26 18:57:49 -05:00
f7a576f2e0
Fixed issue with PB10 being set to OUTPUT for use as a USB Disconnect control on boards which do not have the additional USB disconnect hardware e.g. the Blue Pill. Note. Some variants seem to have the disconnect control on another pin, so I did not change those in case they were actually used
2017-06-25 13:08:30 +10:00
aef93f74cd
Moved encoderLookup LUT from flash to RAM to give 30% speed increase of setPixelColor() - at the expense of 768 bytes of RAM
2017-06-13 10:39:42 +10:00
ca484b4fdd
Add WS2812B library again, but this time without the .git folder in it
2017-06-13 10:38:05 +10:00
40dd7c6fe1
Removed WS2812B lib as it had a .git folder in it which was causing problems
2017-06-13 10:37:16 +10:00
7487d96f70
Fix typo in Hardware end()
2017-06-13 08:32:56 +10:00
cc355255ac
Added WS2812B (aka Neopixel) library using SPI DMA asynchronous transfers and double buffering
2017-06-12 16:42:49 +10:00
953aa8b88e
Added end() to HardWire (I2C)
2017-06-11 15:55:08 +10:00
f47846662d
Added Wire.end() for bit banged version (TwoWire.cpp)
2017-06-11 15:42:05 +10:00
0444a36527
Added an additional SPI API function dmaSendAsync which will start the a DMA send of a buffer and return immediately. The next time dmaSendAsync is called it waits if the previous transfer is not complete. Note the buffer is not copied, so ddouble buffering is needed to use this function
2017-06-11 15:35:14 +10:00
ef60992e20
Merge remote-tracking branch 'upstream/master' into Fix-ifSerial
2017-06-09 22:11:52 +02:00
c4643b265e
Remove isConnected() usage and binary zeros from StringEx_Parsinge xample
2017-06-09 22:07:33 +02:00
bf138eb389
Remove isConnected() usage from examples
2017-06-09 22:07:05 +02:00
3c4307ebac
Fix issue where USB Serial begin(xx) begin(xx,yy) did nothing, when they should ahave called begin()
2017-06-07 14:00:24 +10:00
1e88fcfc61
Merge branch 'Avoid_USB_init_twice' of https://github.com/hanyazou/Arduino_STM32 into hanyazou-Avoid_USB_init_twice
2017-06-07 08:19:07 +10:00
ed8c7a186f
Merge branch 'F1_SPI_development' of https://github.com/stevstrong/Arduino_STM32 into stevstrong-F1_SPI_development
2017-06-06 20:54:53 +10:00
8477fba5d5
Merge branch 'master' into stevstrong-F1_SPI_development
2017-06-06 20:54:17 +10:00
df78777e98
Add yield() call in delay() to support the Arduino Scheduler library. Ref issue #299
2017-06-06 20:45:50 +10:00
9ae2f6fa78
Avoid initializing USB serial twice
2017-06-03 08:27:33 +09:00
Roger Clark
stevstrong
Cristi Marius Tiutiu
victorpv
U-MarquisSeven\Brandon
SukkoPera
Zou Hanya