7e6f102a5a
Code compiles cleanly for Teensy 3.5/3.6 (Is NOT functional though)
2016-10-10 16:58:19 +11:00
621e963c9a
Launch control pull resistor implementation.
2016-09-26 12:01:52 -05:00
57f2a08e26
Added support for both NO and NC clutch switch on launch
...
In many car designs a NC clutch switch acts as NO switch because the pressure plate is forcing the switch open when clutch is released and vise versa for a NO clutch switch. But in almost all designs I've seen they are always grounding. A hot switching option may be added later for exceptions to that design standard.
2016-09-25 13:32:12 -05:00
fabd318e52
Correct usage of MAP value with the Multiply MAP option.
2016-09-25 11:19:40 +10:00
98cc410492
Add pin mapping for MX5 PNP
2016-09-18 21:40:14 +10:00
2b0445b4b9
Allow for custom taco output pin
2016-08-25 08:05:58 +10:00
a33548bc70
Add missing pinFan mode setting
2016-08-24 21:34:02 +10:00
1a54b0d294
Prevent (extremely unlikely) overflow in the PW calc
2016-08-18 19:43:00 +10:00
02340fab53
Only use Include AFR when a wideband sensor is used
2016-08-12 01:44:14 +10:00
01d9578523
Initial groundwork for 5 cylinder support
2016-07-24 19:32:26 +10:00
5847ee5330
Initial Flex sensor reading (Currently untested)
2016-06-24 18:02:53 +10:00
3ee640e4e2
Fix for mistake in previous includeAFR commit
2016-06-21 17:33:53 +10:00
1fefada496
IncludeAFR option added
2016-06-21 17:26:05 +10:00
4cc3c9e8d2
Multiply MAP option
2016-06-01 14:57:53 +10:00
726645d376
Minor performance improvements
2016-05-28 22:06:48 +10:00
97570a294e
Testing commit of the ignition bypass system
2016-04-25 09:09:04 +10:00
be0ccf6a5f
Much improved launch control
2016-04-05 20:44:11 +10:00
e85de746b0
Allow launch to be triggered on high or low signal
2016-03-26 08:45:48 +11:00
c6bbfc72ec
Add some missing pin mappings
2016-03-23 22:08:19 +11:00
c312b749fc
Complete some of the pin mappings for older boards
2016-01-22 12:43:34 +11:00
0830e6d834
Experimental 3 wire idle support
2016-01-13 17:06:55 +11:00
3b3541698e
Fix for missing ignition signals on channels 3 and 4
2015-12-31 16:25:57 +11:00
e00de31a37
Allow for 0ms injector pulse if VE lookup is 0
2015-12-15 21:05:29 +11:00
77ae044b98
Correctly use launchPin setting
2015-11-25 15:39:52 +11:00
7ea2757c95
Code optimisations, mostly small
2015-10-30 20:11:16 +11:00
fe1d58cd38
Basics of launch control in place
2015-10-18 23:20:16 +11:00
57607b8ac0
Experimental fast digital IO work
2015-09-30 14:47:48 +10:00
12f11cc1a3
added second o2 support
2015-09-14 00:16:46 +01:00
f4968d8791
Minor fixes
2015-08-22 16:24:58 +10:00
995eb80eef
ini updates for idle curves
2015-08-21 17:20:56 +10:00
c63c581e61
Complete but untested idle control
2015-08-21 14:14:47 +10:00
406071d81f
Set mode correctly for battery voltage input
2015-08-17 22:33:29 +10:00
96a5c95168
Definitions for v0.4 board
2015-08-16 18:00:24 +10:00
bb5d797187
Same fix on v0.3 pin mapping
2015-08-12 16:12:14 +10:00
f4d98b8115
Correct v0.4 pin mapping
2015-08-12 14:15:39 +10:00
d7e9823770
Fix turtana board mapping
2015-07-12 20:34:19 +10:00
48f426317d
Add explicit license information
2015-05-29 09:49:44 +10:00
e51968fe04
Minor pin mapping revisions and updated base tune
2015-05-22 07:22:22 +10:00
0db28fab18
Add fuel pump and idle pin mappings
2015-05-16 21:06:23 +10:00
2f46e6306f
Cleanup and remove some old, unused code
2015-04-22 00:06:42 +10:00
ffce6ad81c
Add tacho output pulse
2015-04-14 14:41:44 +10:00
d662611710
Add Plazomat 0.1 mapping
2015-03-24 13:11:34 +11:00
bc8c9ed441
Add pin mapping for Turtana board
2015-03-20 00:35:41 +11:00
f97a60eb35
Add config option to set the board layout being used
2015-03-15 22:54:47 +11:00
b743b2d1d0
Make the code compileable with eclipseArduino
2015-02-14 18:04:00 +01:00
39cdb0a316
High resolution RPM logging
2015-02-07 13:50:23 +11:00
Josh Stewart
ConnerMcLaughlin
darren siepka
Fredrik Johansson