Commit Graph

60 Commits

Author SHA1 Message Date
Fabien Poussin 2da018e0e7
Merge pull request #220 from twadleigh/twadleigh/pal-with-events
Added sync & callback interface to KINETIS/GPIOv1.
2020-08-18 20:13:21 +02:00
Michael Stapelberg f339189b11 hal_lld: make HSRUN mode work for e.g. 180 MHz Teensy 3.6 2020-06-03 22:02:34 +02:00
Michael Stapelberg 571691aeab fix a couple of forgotten SET calls 2020-06-03 22:02:29 +02:00
Tracy Wadleigh 317f69356c More compilation guards. 2020-05-26 08:12:21 -07:00
Tracy Wadleigh e8cc54e995 Extra compilation guards. 2020-05-26 08:06:03 -07:00
Tracy Wadleigh 47b1725a7d Modified the ISR. 2020-05-26 07:28:06 -07:00
Tracy Wadleigh a263688c5e Added sync & callback interface to KINETIS/GPIOv1. 2020-05-25 21:19:24 -07:00
Tracy Wadleigh c995b9c141
fix address assignment 2020-05-17 15:16:38 -07:00
Tracy Wadleigh 17f45e24a3
Fix up SD1 initialization for KL2x
In the case of KINETIS_SERIAL0_IS_UARTLP:
* the argument to `sd_lld_init_driver` needs to be explicitly coerced to a pointer of type `UART_TypeDef`;
* the initialization of `c4_p` needs to be patched, as its position is different in the underlying `UARTLP_TypeDef`.
2020-05-04 10:10:24 -07:00
Fabien Poussin bc65ee4513 Kinetis SPI driver 2019-10-02 13:54:24 +02:00
Fabien Poussin 2e17d54017 Kinetis ADC 2019-10-02 13:09:49 +02:00
Konstantin Oblaukhov d921781a45 KINETIS platform update for ChibiOS 18.2.x. 2018-11-20 09:53:30 +07:00
Konstantin Oblaukhov d200007a29 Reorganize KINETIS driver files 2018-11-20 09:53:22 +07:00
Michael Walker 8f974a83a5 Adding missing interrupt vector for SDHC on MK66F18 MCU 2018-05-08 07:39:53 -07:00
Fabien Poussin 6cc0927c06
Merge pull request #158 from walkerstop/mike
Kinetis MK66F18 and PJRC Teensy 3.6 support
2018-05-07 16:58:30 +02:00
Michael Walker 619d45c0ff Fix MK66F18 compilation for the following HALs: Serial, I2C, EXT, ADC, GPT, PWM, SPI 2018-05-07 07:45:08 -07:00
Fabien Poussin dfd4708dbc
Merge pull request #156 from wiml/k64_support
Kinetis K64 and PJRC Teensy3.5 support
2018-05-05 19:23:19 +02:00
Michael Walker f4b640014d Correct register definitions for MK66F18 for LPTMR and FlexRAM 2018-05-03 15:17:52 -07:00
Michael Walker 8f7e1d18b9 Always use IRC48M clock for USB on MK66F18 2018-05-02 07:53:01 -07:00
Michael Walker 5bec0d7abc Always use IRC48M clock for USB on MK66F18 2018-05-02 06:49:29 -07:00
Michael Walker 0f3af19758 Disable MPU by default 2018-05-02 05:15:22 -07:00
Michael Walker 72b22c7f67 Merge branch 'master' into mike 2018-05-02 03:48:09 -07:00
Michael Walker 1fefdf78fe Remove duplicate code already in upstream master and add include dir 2018-05-02 03:47:26 -07:00
Michael Walker cd7559268d Merge branch 'master' into mike 2018-05-02 03:37:31 -07:00
Michael Walker 457afa6202 Remove duplication 2018-05-02 03:36:12 -07:00
Michael Walker 6d879f58f5 Merge remote-tracking branch 'upstream/master' 2018-05-02 03:33:23 -07:00
Michael Walker 0fbddccd80 disable voltage inrush regulator 2018-05-01 03:26:28 -07:00
Michael Walker 46233064c5 iasdfa 2018-05-01 01:07:46 -07:00
Michael Walker 7506c2a2c1 support Teensy 3.6 2018-05-01 00:46:42 -07:00
Michael Walker c7e0258666 Merge branch 'master' into mike 2018-05-01 00:37:57 -07:00
Michael Walker 4e9f077fb1 Enable Kinesis on newer ChibiOS 2018-05-01 00:26:06 -07:00
Michael Walker b0a7581067 Attempt at Teensy 3.6 support 2018-04-30 16:34:26 -07:00
Fabien Poussin 424c7a2717 Fixed most testhal examples for STM32, updated configs using script. Fixed deprecated MS2ST calls. 2018-03-14 20:15:13 +01:00
Fabien Poussin 32f792087a
Merge pull request #139 from wiml/kinetis_sdhc
Add support for the Kinetis SDHC peripheral
2018-03-08 17:13:30 +01:00
Fabien Poussin 6927538038
Merge pull request #136 from wiml/k64_uarts
Added support for additional UARTs (up to six on the K64F).
2018-03-08 17:11:14 +01:00
Fabien Poussin 11066ebbd3
Merge pull request #143 from qmk/fix_kinesis_usb_data_sync
Fix Kinetis usb databank synchronization problems
2018-03-08 17:09:26 +01:00
Fred Sundvik b7f761313c Fix data usb data toggle sync problem
USB control transfers are structured as the following.
For incoming transfers
Setup (Data0 out)
Data (Data1/Data0 in) - starting with data 1
Status (Data1 out)

For outgoing transfers
Setup (Data0 out)
Data (Data1/Data0 out) - starting with data 1
Status (Data1 in)

The in buffers (device to host) are always correctly synchronized, since
they can always be reset to Data1 each setup packet without any
synchronization problems.

The problem occured for outgoing transfers (host to device). For
incoming transfers the data banks always alternates, and will
automatically stay in sync. Outgoing transfers also stays in sync when
there's an odd number of data packets. However when the number is even,
including zero, then the last packet received by the device will be
data0 and the next setup packet also has to be data0, so there's a
synchronization problem.

This itself is not a problem since data toggle synchronization(DTS) is
ignored for setup packets, however if the follwoing packet after that
is also an out packet, then the data bank will be wrong and the packet
dropped. In this case the USB spec don't allow sending a nack, so it
will only recover after a timeout, when the host tries to send a new
setup packet.

The old code tried to take care of this situation by reinitializing
both data banks when a setup packet is received. The problem is that the
next packet might already have been received or is in progress of being
received at this point, so the fixup comes to late. The new code does
the fixup when a status packet is about to be sent from the device to
avoid this problem.
2018-02-08 08:34:51 +02:00
Fred Sundvik 432bc1762f Add usb_lld_wakeup_host for Kinetis 2018-02-03 17:25:31 +02:00
Wim Lewis 7e51a3bcfa Use an interrupt instead of polling for simple commands.
Updated some comments and some trace statements.
2018-01-18 18:23:07 -08:00
Wim Lewis 48d924c24b Improved error handling: check the card's state before trying to abort
a failed data transfer; translate card status bits into HLD error
bits. Set BLKATTR_BLKCNT even when it's not being used, which seems to
avoid errors when alternating between multi-block and single-block
transfers. Some comments.
2018-01-18 01:33:04 -08:00
Wim Lewis ee3f7f1b85 Low-level driver for the Kinetis SDHC peripheral as found on the MK64FX512
and other members of the Kinetis family.
2018-01-06 03:17:53 -08:00
Wim Lewis 0df335ce45 Basic support for the (Motorola/Freescale/NXP) Kinetis MK64FX512 chip,
partially copied from the existing K20 support.
2018-01-06 03:09:58 -08:00
Wim Lewis c4eb6b4901 Added support for additional UARTs (up to six on the K64F).
Also moved some code that is duplicated per-UART into
local functions to reduce the amount of duplication.
2017-12-08 19:42:13 -08:00
Fabio Utzig ab3f7c22cc
Merge pull request #133 from belak/k20x-mcg-c2
Fix for K20x startup
2017-11-04 17:32:26 -02:00
Kaleb Elwert 96413f3767 Fix for K20x startup 2017-11-04 10:41:06 -07:00
flabbergast db3057e1fc [KINETIS] Add saved_state to USB driver. 2016-07-17 20:49:48 +01:00
flabbergast 3cde591bd2 [KINETIS] Fixes for kernel-less builds. 2016-05-20 19:16:47 +01:00
flabbergast 7d99206f05 [KINETIS] PAL driver: implement PAL_LINE. 2016-05-08 09:09:43 +01:00
Fabio Utzig 5c02f23706 Merge pull request #62 from flabbergast/i2c
[KINETIS] I2C update (timeouts, KL27Z)
2016-04-27 19:03:01 -03:00
flabbergast 9107b150b0 [KINETIS] Add I2C workaround for KL27Z. 2016-04-25 11:53:55 +01:00