Dominic Clifton
1bac2830aa
Merge pull request #642 from ledvinap/doc-pid-internals
...
Augment/improve PID Internals
2015-03-30 11:37:08 +01:00
Dominic Clifton
6922857db0
Merge pull request #683 from sherlockflight/flash-N25Q064
...
Add support for Micron N25Q064 64Mbit SPI flash
2015-03-30 11:35:42 +01:00
Dominic Clifton
20fd7b8491
Merge pull request #565 from mosh1/new_failsafe_defaults
...
Default failsafe enabled and throttle off when no valid PPM signal is se...
2015-03-30 11:15:25 +01:00
Moshen Chan
d6db3dbf08
Fix grammar
2015-03-29 23:44:12 -07:00
Moshen Chan
e110a30efc
Update docs with incorrect info for rssi_channel and add the renamed functionality.
2015-03-29 23:42:55 -07:00
Nicholas Sherlock
85dc16f96d
Add support for Micron N25Q064 64-mbit SPI flash
2015-03-30 18:17:56 +13:00
Nicholas Sherlock
01b811cd8c
Add support for Winbond 64Mbit SPI flash chip
2015-03-30 12:04:41 +13:00
Dominic Clifton
16fda38eba
Merge pull request #625 from OpCode1300/docs
...
Board recovery documentation.
2015-03-28 20:58:55 +00:00
Dominic Clifton
02d8313437
Additional cleanup of generic Flashing docs.
2015-03-28 20:48:01 +00:00
Dominic Clifton
ab30a208e1
Updating generic flashing instructions.
...
Removing link to docs, doesn't make sense when compiled to PDF and all
documentation links must be relative.
2015-03-28 20:46:14 +00:00
Dominic Clifton
499ca8b203
Merge pull request #656 from cmavr8/docs-installation-additions
...
Docs: Added detailed steps for flashing
2015-03-28 20:40:00 +00:00
Dominic Clifton
b40b35e162
Updating GPS tested hardware list. Closes #627
2015-03-28 20:37:43 +00:00
Dominic Clifton
0c82141472
Use preferred alternative formatting for code blocks in Cli.md docs.
...
See #650
2015-03-28 20:20:53 +00:00
Dominic Clifton
0d221bded9
Merge pull request #650 from mtrl/master
...
Put CLI commands in code blocks so they appear in the markdown correctly
2015-03-28 20:18:36 +00:00
Dominic Clifton
4e07899a06
Move the updated list of user-tested GPS hardware back into Gps.md - no
...
real reason to split it out to a seperate file. Additionally the
seperate file was not listed in build_docs.sh and therefore was not
included in the PDF documentation.
If there was a section of supported hardware as an appendix to the
documentation that we could move it back, but that should be done for
GPS, RX's, LED, Buzzers, etc and all at the same time.
2015-03-25 13:28:32 +00:00
Dominic Clifton
8c5050848d
Update telemetry documentation now that telemetry_provider is gone.
...
Closes #670 .
2015-03-25 13:23:15 +00:00
Dominic Clifton
497929816a
Merge pull request #652 from sherlockflight/docs
...
Add building instructions for Mac OS X
2015-03-22 21:25:27 +00:00
Dominic Clifton
472409e7e0
Merge pull request #659 from digitalentity/patch-1
...
Update GPS tested hardware
2015-03-22 21:23:24 +00:00
Dominic Clifton
1ca00bdb9e
Adding developer docs regarding configuration storage.
2015-03-22 09:41:37 +00:00
Konstantin Sharlaimov
ec6df122cc
Update GPS tested hardware
...
Added a GPS receiver I verified to be working with CF on my quad
2015-03-22 09:19:08 +10:00
Chris Mavrakis
78b8f8908d
Added detailed steps for firmware flashing
2015-03-21 19:03:18 +01:00
Dominic Clifton
31616dd010
Merge pull request #655 from skyflyer/master
...
References cleanflight/cleanflight#631 - revised docs
2015-03-21 14:29:15 +00:00
Nicholas Sherlock
23908f9dd4
Add building instructions for Mac OS X
2015-03-21 19:12:47 +13:00
Mark Williams
8b3a5dbb73
Put CLI commands in code blocks so they appear in the markdown correctly
2015-03-19 21:17:56 +00:00
Mark Williams
a94d73ad3b
Typo fix for rate export commands in cli.md
2015-03-19 20:50:30 +00:00
Miha Valencic
aedb666909
References cleanflight/cleanflight#631 - added feature FAILSAFE and spellchecked
2015-03-19 09:47:50 +01:00
Petr Ledvina
e15322868e
Augment/improve PID Internals
2015-03-18 19:51:25 +01:00
Administrator
934adfc613
Merge remote-tracking branch 'cleanflight/master' into docs
2015-03-15 19:55:13 -04:00
tracernz
0f3c4afcc4
Add note on passthrough mode
2015-03-15 17:11:49 +13:00
Administrator
f6ef4273b4
Markdown touchups
2015-03-14 23:50:32 -04:00
Administrator
4baec3eed2
Wrap ASCII board in code block to correct display formatting
2015-03-14 23:46:51 -04:00
Administrator
1747f621d4
Better formatting and more verbose
2015-03-14 23:31:34 -04:00
Administrator
c38611191d
Add 5V pad warning, and configurator setting.
2015-03-14 23:21:05 -04:00
Administrator
ae83189085
Board recovery documentation.
2015-03-14 21:34:34 -04:00
Dominic Clifton
0e2356bf00
Updating failsafe documentation.
2015-03-14 22:14:39 +01:00
Dominic Clifton
9b092a841b
Merge pull request #621 from OpCode1300/docs
...
GPS support and hardware split
2015-03-14 21:20:51 +01:00
Dominic Clifton
4cf6fe6571
Rename 'frsky_hiprec_vfas' to 'frsky_vfas_precision' and introduce enum
...
for FRSKY_VFAS_PRECISION_LOW and FRSKY_VFAS_PRECISION_HIGH.
Improves naming for humans. 'hiprec' was meaningless and
untranslatable. See
https://cleancoders.com/episode/clean-code-episode-2/show
2015-03-13 23:49:24 +01:00
Dominic Clifton
d82fc6b9be
Merge pull request #477 from projectkk2glider/projectkk2glider/issue_316_frsky_voltages
...
Fixes #316 : better arithmetics for FrSky CELL voltages, VFAS battery vol...
2015-03-13 23:40:24 +01:00
Dominic Clifton
626bd29dae
Merge pull request #592 from sherlockflight/blackbox-serial-baud
...
Support new 230400 baud rate which allows >750Hz Blackbox logging
2015-03-13 23:24:57 +01:00
Dominic Clifton
ecc6645783
CC3D - Adding instructions on how to restore the OpenPilot bootloader
...
via JLink.
2015-03-13 23:06:27 +01:00
Administrator
028d616169
GPS support and hardware split
...
Moved supported hardware to new doc. Added support for Ublox Neo-M8N
2015-03-13 14:06:20 -04:00
Dominic Clifton
764b1ecc18
Merge pull request #576 from tracernz/vcm-doc
...
Fix error in VCM docs
2015-03-11 20:19:09 +01:00
Dominic Clifton
bf95cbcaf4
Merge pull request #602 from dkisselev/patch-1
...
Fix default value on updated pid_at_main_throttle
2015-03-11 20:17:29 +01:00
Dominic Clifton
f62b5c883d
Merge pull request #601 from tricopterY/tricopterY-patch-1
...
Update serial_msp.c
2015-03-11 20:15:24 +01:00
Dominic Clifton
3a0a4e70f9
Merge pull request #608 from icdark/patch-1
...
Fix typo in "PID tuning.md"
2015-03-11 20:11:04 +01:00
Brnadon Miller
036fa9c049
Added custom mixer examples and documentation
2015-03-11 14:20:45 -04:00
Brnadon Miller
eccdca9262
Merge remote-tracking branch 'remotes/cleanflight/master'
2015-03-11 14:04:12 -04:00
icdark
e1be456b3c
Fix typo in "PID tuning.md"
2015-03-11 12:36:54 +01:00
Nicholas Sherlock
cee021706b
Merge remote-tracking branch 'upstream/master' into blackbox-serial-baud
2015-03-11 13:31:30 +13:00
Denis Kisselev
1eae5e3ac3
Fix default value on updated pid_at_main_throttle
...
The code was updated changing the default to 1 with the last commit but that change was not reflected here
2015-03-09 19:25:38 -07:00