rusefi
/
atbetaflight
mirror of https://github.com/rusefi/atbetaflight.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
1,460 Commits 1 Branch 0 Tags 316 MiB
Commit Graph

1460 Commits

Author SHA1 Message Date
Dominic Clifton 91c7407806 Cleanup CC3D softserial - it only has enough pins/timers for one port. 
PR #124 incorrectly re-used the same timer hardware for the second port
which was bad.
 2014-10-20 19:34:10 +01:00
Dominic Clifton b08f51d88c Undo changes from 20c4dae7c2 / hott.c 
until a proper fix is found.
 2014-10-20 18:54:30 +01:00
Dominic Clifton 729b929933 Merge pull request #124 from Pierre-A/cc3d-updates-1 
SoftSerial port for CC3D
 2014-10-20 18:29:19 +01:00
Pierre-A 20c4dae7c2 SoftSerial port for CC3D 2014-10-19 11:20:55 +02:00
Dominic Clifton 63236d5a2a Fixed bug where channel mapping was incorrect when using GPS and RX 
Parallel PWM on STM32F10X targets. Fixes #80.

The check to see if usart2 should always be done.  The PWM mapping code
decides on a per-target base if possible pwm input channels need to be
skipped due to pin usage clashes.
 2014-10-18 18:16:58 +01:00
Dominic Clifton c3c6a90a17 Latest binaries with FrSky telemetry updates and first cut of 
MSP_API_VERSION command.
 2014-10-18 17:17:33 +01:00
Dominic Clifton b03df441f3 Updating serial port details for Naze board. 2014-10-18 16:40:21 +01:00
Dominic Clifton a3aad91f76 Bump EEPROM version (for #108). 2014-10-18 16:38:40 +01:00
Dominic Clifton e0495343de Updating credits for FrSky telemetry. 2014-10-18 16:03:37 +01:00
Dominic Clifton 8fef02fe8d Updating FrSky telemetry docs to match recent code changes. 2014-10-18 15:58:28 +01:00
Dominic Clifton 1b47d3cbae Clean up pull request #108 from @Airmamaf. 2014-10-18 15:52:04 +01:00
Dominic Clifton df5a61b433 Merge branch 'airmamaf-airmamaf' 2014-10-18 15:07:03 +01:00
Dominic Clifton 1c501272ab Merge branch 'airmamaf' of github.com:airmamaf/cleanflight into airmamaf-airmamaf 2014-10-18 15:06:42 +01:00
Dominic Clifton 50971667d9 Fix a couple of typos in MSP guidelines. 2014-10-17 22:46:07 +01:00
Dominic Clifton 596d798732 Add MSP_API_VERSION command. Added MSP development guidelines. Define 
board identifiers for all cleanflight targets.
 2014-10-17 22:34:15 +01:00
Dominic Clifton 4f96e3c20e Disable MPU6500 on EUSTM32F103RC because the driver autodection is not 
implemented yet. See #119.
 2014-10-17 01:35:46 +01:00
Dominic Clifton 6f3aa6fb86 Add extra MSP commands to allow settings to be made via a GUI in 
addition to setting via the CLI.

Note: MSP_CONFIG from baseflight
bc68d89983d762d35cc1cf5e3fa0c2cf03287b70 will not be supported because
more specific commands exist in cleanflight.

MSP_MISC and MSP_CONFIG are good examples of single responsibility
violations.
 2014-10-17 01:33:47 +01:00
dongie afb77484ea cleanup hardware revision detection and get rid of checks for hse_value 
add spi autodetect functionality, actually check for currently used M25P16 flash chip
 2014-10-16 01:16:30 +01:00
Dominic Clifton 38dbe897d9 Reduce RAM usage of mpu6050 initialisation. 2014-10-16 01:10:23 +01:00
Dominic Clifton f5895b762f NAZE32_SP - Enable MPU6500 driver. 2014-10-16 00:57:44 +01:00
Dominic Clifton 8f9a553a9e Use Naze hardware revision when initialising mma845. Cleanup ADXL345 
initialisation.
 2014-10-16 00:56:02 +01:00
Dominic Clifton 50391f2c8e Use Naze hardware revision when initialising beeper. Cleanup inverted 
beeper configuration.
 2014-10-16 00:44:56 +01:00
Dominic Clifton 2ed09b0b2f Use Naze hardware revision when initialising bmp085. Cleanup bmp085 
GPIO configuration for all targets.
 2014-10-16 00:13:09 +01:00
Dominic Clifton 79917da85a Use Naze hardware revision when initialising mpu6050. The driver is not 
not naze specific anymore.
 2014-10-15 23:10:18 +01:00
Dominic Clifton cf643b98c8 Use Naze hardware revision when initialising hmc5883. The driver is not 
not naze specific anymore.
 2014-10-15 22:42:07 +01:00
Dominic Clifton 6162f609ea Use Naze hardware revision when initialising adxl345 - this now allows 
the driver to be used by any target with an hse_value of 12Mhz.
 2014-10-15 21:16:52 +01:00
Dominic Clifton a4879cc2e3 Use Naze hardware revision when initialising ADC. 2014-10-15 21:14:49 +01:00
Dominic Clifton 8ef70abaa0 NAZE32 - Add hardware revision detection. 2014-10-15 20:59:06 +01:00
Dominic Clifton d3fc10fd83 Mode documentation updates. 2014-10-15 19:26:03 +01:00
Dominic Clifton 697152e69a Ensure that binary file changes are ignored when producing a git diff. 2014-10-15 15:23:59 +01:00
Dominic Clifton 83e22cb5ad Updating readme. 2014-10-15 14:33:27 +01:00
Dominic Clifton 30ddd177d9 Removing more profanity from code. See #43. 2014-10-15 14:33:10 +01:00
Dominic Clifton 80989c4bee Update Sonar docs. 2014-10-15 09:32:57 +01:00
Dominic Clifton 71170a40b2 Latest binaries (from 79c2e5648f) to use 
with configurator 0.51.1.
 2014-10-15 09:30:30 +01:00
dongie 53917ef87f Correcting MPU6500 driver multibyte reads - deasserting CS after read register write was a bad idea. 2014-10-14 00:24:56 +01:00
dongie 2c1ffd8f56 Fix initialization period for MPU6500, would cause strange effects if not followed. 2014-10-14 00:24:36 +01:00
dongie 3200e93a4d Slight cleanup of MPU6050 driver to use same constants as MPU6500. Both drivers should probably get merged, the operation is nearly identical with only bus access being different. 2014-10-14 00:24:15 +01:00
dongie 1e769cc1f2 Initial stab at supporting MPU6500. 
Make I2C driver fail gracefully when I2C hardware hasn't been initialized (on boards w/o I2C sensors)
 2014-10-14 00:23:50 +01:00
Dominic Clifton da51b5c479 Add MPU6500 SPI driver. Move sensor initialisation defines into target 
specific headers.
 2014-10-14 00:22:54 +01:00
Dominic Clifton 79c2e5648f Add MSP capability bit so clients can detect Cleanflight and use an 
appropriate API.  Renumber some cleanflight specific MSP commands,
Cleanflight will use the range 32-63 for new MSP commands.
 2014-10-13 22:36:00 +01:00
Dominic Clifton 1257367705 Latest binaries with mode range support. 2014-10-13 20:58:20 +01:00
Dominic Clifton 279f85b151 Bump EEPROM version for mode range support. 2014-10-13 19:57:28 +01:00
Dominic Clifton 59c55b4a19 Use permenant id for MSP_SET_MODE_RANGE. 2014-10-13 01:08:41 +01:00
Dominic Clifton c5280cd9d7 Ensure mode flags are correctly generated after the switch to a bitmask 
for activated modes.
 2014-10-13 00:53:41 +01:00
Dominic Clifton 50ba314116 Fix range check problem for first mode range index. 2014-10-12 23:43:12 +01:00
Dominic Clifton 77e83eef0c Use permenant mode ids in MSP_MODE_RANGES and MSP_SET_MODE_RANGE. 2014-10-12 21:47:39 +01:00
Dominic Clifton 2555858687 Add two new MSP commands to get ALL mode ranges and to set individual 
mode ranges.
 2014-10-12 21:22:05 +01:00
Dominic Clifton ca9f183b83 Cleanup some aux range defines and comments. 2014-10-12 21:05:34 +01:00
Dominic Clifton cfcd4792bb Determine with an aux range is used to arm. 2014-10-12 21:02:45 +01:00
Dominic Clifton 738c807e1d Fix setting of upper limit for mode ranges in cli. 2014-10-12 19:49:31 +01:00