rusefi
/
bldc
mirror of https://github.com/rusefi/bldc.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
943 Commits 2 Branches 0 Tags 84 MiB
Commit Graph

197 Commits

Author SHA1 Message Date
Benjamin Vedder f25144cc30 Removed iterative observer, added p_pid_gain_dec_angle 2021-04-26 23:14:05 +02:00
Benjamin Vedder 36d32ed96d
Merge pull request #291 from Mitchlol/balance_4.2 
Balance 4.2
 2021-04-20 15:53:12 +02:00
Marcos Chaparro d8d2088137 app adc: allow hardwares to override the brake input 
With this hook the brake can be overriden from the hw_*.c file without
polluting the app configuration UI.

Some examples of commanded braking:
* Tilt/crash sensor
* Gear shift sensor
* Emergency stop
* Kill switch

Signed-off-by: Marcos Chaparro <mchaparro@powerdesigns.ca>
 2021-04-19 11:33:57 -03:00
Mitch Lustig c9ed013f13 Fix low speed Full switch faults, Fix Booster, Improve turn/torque tilts 2021-04-17 18:05:24 -07:00
Benjamin Vedder 89d854f4c4 Added Finns app 2021-04-12 19:46:37 +02:00
Benjamin Vedder 998bc17ba7 Cleanup 2021-04-12 09:48:29 +02:00
Benjamin Vedder ca8e7b4f05
Merge pull request #271 from CTSchorsch/dev_05_03 
- Add driver for SX1278 LoRa boards, eg. HopeRF RFM95W (driver by Woj…
 2021-04-12 09:35:38 +02:00
Benjamin Vedder 1f1e1e99fb
Merge pull request #276 from Mitchlol/balance_4.1 
Balance 4.1
 2021-04-08 18:07:54 +02:00
Mitch Lustig 273f067db3 Code Cleanup 2021-04-07 22:42:21 -07:00
Mitch Lustig af941b3182 Little cleanup 2021-04-07 00:30:37 -07:00
Benjamin Vedder a9c2a4fcc9 Added ER application 2021-04-06 14:12:57 +02:00
Mitch Lustig 08f27f433c Add turn tilt 2021-04-06 02:18:32 -07:00
Mitch Lustig 175ed9e21c Merge branch 'dev_fw_5_03' into brc_mod_1 2021-04-01 20:57:44 -07:00
mattbutlar fae1466601 Add comment on value mapping 2021-04-01 14:35:57 -07:00
mattbutlar bb7b049d86 Remove loop timing test 2021-04-01 09:53:03 -07:00
CTSchorsch 4f048442d0 cleanup spaces 2021-03-31 19:46:31 +02:00
Benjamin Vedder fcb7e12158 Made servo output a config option 2021-03-31 16:28:46 +02:00
CTSchorsch 755ff98ec9 fix spaces, delete lines and default config 2021-03-31 14:10:27 +02:00
Benjamin Vedder 69d3a1ba33 Only change UART pin mode when needed 2021-03-31 09:54:59 +02:00
mattbutlar b61049b18e Change roll comp math to avoid external deps 2021-03-30 23:20:35 -07:00
mattbutlar 4f74c179a2 Simplify roll comp math 2021-03-29 14:42:30 -07:00
Mitch Lustig 9f41e4407f Fix compiler warning 2021-03-28 14:41:05 -07:00
Mitch Lustig decdc7e7d6 Add torquetilt 2021-03-27 20:13:22 -07:00
Mitch Lustig 3b9fe6ec67 Add Booster 2021-03-27 14:00:55 -07:00
CTSchorsch 331494291d - move lora files from hwconf/ to lora/ 
- modify Makefile and add lora/lora.mk
- hopefully have all idents fixed
- restore commands.c and add new function again
- fix memory leak bug in gesc.c
- rfm95w.c add delay in while loop
- add gesc to build_all / rebuild all works
 2021-03-27 21:13:24 +01:00
Mitch Lustig 49e624ba3b Remove boring features 2021-03-27 12:17:10 -07:00
CTSchorsch cdb8e82c32 - Add driver for SX1278 LoRa boards, eg. HopeRF RFM95W (driver by Wojciech Domski, https://github.com/wdomski/SX1278) 
- Add a simple bool isInitialized() to commands.c, to check if commands are initialzied
- Add hwconf for GESC, hobby open source ESC (https://github.com/CTSchorsch/gesc) including a simple double pulse test function
- Add app_dpv.c to read out a simple I2C magnetic field sensor and two hall sensors to control a underwater scooter
 2021-03-27 14:15:22 +01:00
Benjamin Vedder 2133d21fbc Avoid numerical instability when utils_map is used over a range that approaches 0 2021-03-27 11:18:47 +01:00
mattbutlar 583e62933d Add roll compensation to the balance app 2021-03-14 22:57:47 -07:00
Benjamin Vedder 703f1ed9a3 Fixed RPM limit bug for curret hyst rev mode 2021-03-13 11:33:29 +01:00
Benjamin Vedder 9a0973cba1 Style fix 2021-01-15 14:01:16 +01:00
Benjamin Vedder ecb43e70bb Cleanup 2021-01-13 21:51:55 +01:00
Jeffrey M. Friesen 57a13ec2da cleanup merge 2021-01-13 09:05:16 -08:00
Jeffrey M. Friesen 6a3dfb8526 Patched bug with gpio AF in uart 2021-01-05 12:30:41 -08:00
Jeffrey M. Friesen e862f29298 Re-wrote uart driver a bit 2021-01-05 09:39:45 -08:00
Marcos Chaparro 33b5d5c1ba Pedal assist support (PAS) 
This commit enables cadence-based pedal assist for ebikes using
quadrature-style pedal speed sensors.

There are 2 operation modes:
* PAS only: Motor current is based only on pedal feedback
* ADC + PAS: The code will use both ADC and pedal feedback and use
the strongest command to provide seamless overlap when the user is
pedalling and requests extra torque with the throttle.

Signed-off-by: Marcos Chaparro <mchaparro@powerdesigns.ca>
 2020-12-07 17:06:36 -03:00
Till Rosenband 82e5bcd845 Verify FLASH integrity of MC and APP config with CRC. 
* Currently the FW code has CRC checks, but configs are also important!
* This helps maintain FLASH integrity when the config pages are occasionally
  re-written due to odometer updates (later commit).
* If the config CRC checks fail, store the fault and fall back to default config.
* New 'crc' terminal command displays CRC values.
 2020-10-04 00:31:31 -04:00
Mitch Lustig 52f8f2cf35 Merge remote-tracking branch 'vedderb/dev_fw_5_02' into balance_3 2020-07-09 01:06:02 -07:00
Mitch Lustig 27e1d11f4a Lil fixes 2020-07-04 03:35:19 -07:00
Mitch Lustig 0f5c6f5379 Add confgen and running states 2020-07-04 00:11:20 -07:00
Mitch Lustig 7db04df582 Add all the variables 2020-07-03 20:33:15 -07:00
Peemouse ca05c36c7f App PPM rework - fix previous commit 
CHANGED : Master keeps the slave(s) running even if a local fault occurs
CHANGED : Master now sends relative value instead (%) instead of absolute value (A) (great for multiple VESC with different currents settings)
FIXED : Timeout current brake feature not working
FIXED : brake command sent over CANbus even if Multiple VESC over CAN disabled
FIXED : delay before switching slave off in case of RX timeout
ADDED : Traction control auto-disabling in case of fault on master, re-enable only if no effect on motors will happen (avoid weird behaviour exiting fault state on master).
 2020-07-03 15:16:46 +02:00
Mitch Lustig 8299445c66 Basic feature set complte 
Fix some bugs
Add D-Term PT1 Filter
Add all the fault delays
Setpoint clamp no longer breaks tiltback
Add configurable constant tiltback erpm
 2020-07-02 01:07:54 -07:00
Peemouse 37e9c2143b CHANGED : Master keeps the slave(s) running even if a local fault occurs 
CHANGED : Master now sends relative value instead (%) instead of absolute value (A) (great for multiple VESC with different currents settings)
FIXED : Timeout current brake feature not working
FIXED : brake command sent over CANbus even if Multiple VESC over CAN disabled
FIXED : delay before switching slave off in case of RX timeout
ADDED : Traction control auto-disabling in case of fault on master, re-enable only if no effect on motors will happen (avoid weird behaviour exiting fault state on master).
 2020-07-01 14:39:31 +02:00
Mitch Lustig b61a0ea7be Add additional timer for switch half state 2020-06-19 01:28:52 -07:00
Mitch Lustig da7b3a0ffb Mix of stuff (Not a working state) 
Organize vars
Hack in dterm PT1
Improve faults
Remove dead state
 2020-06-19 01:00:37 -07:00
Benjamin Vedder 6196805d8c Added CHUK_CTRL_TYPE_CURRENT_BIDIRECTIONAL, some fixes on last PR 2020-05-03 22:35:37 +02:00
Benjamin Vedder 80fffdea73 Fixed PPM bug in previous release 2020-04-27 14:23:49 +02:00
Benjamin Vedder ef4ebfde93 Allow throttle in opposite direction even after passing speed limit for PPM and VESC Remote apps 2020-04-26 11:48:55 +02:00
Benjamin Vedder 84ce74c325
Merge pull request #141 from Mitchlol/Balance_app_sprint_3 
Balance sprint 3
 2020-03-16 20:35:26 +01:00