24c5f06638
Update date
2021-05-09 00:59:39 +00:00
dd46591ad5
hip9011 ( #2658 )
...
* hip9011: isolate debug stuff
* hip9011: renames
* hip9011: start sensing knockDetectionWindowStart degres from fire
* engine: more realistic values for knock window
* hip9011: remove magic CS toggling
* hip9011: EFI_HIP_9011_DEBUG should depend on EFI_HIP_9011
2021-05-08 18:43:55 -04:00
2cba913174
Auto-generated configs and docs
2021-05-08 21:43:56 +00:00
d7f9d42e07
Hook up multi bank fuel trim ( #2532 )
...
* multi bank trim
* cleaning
* output channels
* output channels
2021-05-08 17:41:50 -04:00
ea870c4869
hip9011 ( #2654 )
...
* Move HIP states enum out of rusefi_enums.h
-this is internal driver stuff. No need to have it defined globaly.
* Auto-generated configs and docs
2021-05-08 10:08:18 -04:00
8ad07d087e
Update date
2021-05-08 00:55:53 +00:00
d5472a672f
Auto-generated configs and docs
2021-05-07 23:28:16 +00:00
747ed34b40
Auto-generated configs and docs
2021-05-07 19:43:12 +00:00
37a3de07cf
remove stateChangeCallback from simplepwm ( #2644 )
...
* remove callback parameter from cj125
* remove from ext
* remove stateChangeCallback
* alt doesn't need that
* demorgan
* remove call
* bad cut/paste
* check the actual pin in the test
2021-05-07 09:38:41 -04:00
ea6cb14780
move some stuff in to ccm ( #2645 )
...
* stuff in ccm
* used memory
2021-05-07 09:35:57 -04:00
b12d392343
pack scheduling_s ( #2642 )
...
* pack scheduling_s
* ramz
2021-05-07 08:22:35 -04:00
b92f827c36
Auto-generated configs and docs
2021-05-07 03:16:46 +00:00
477c5f6beb
Update date
2021-05-07 00:57:02 +00:00
eecb0778f0
Auto-generated configs and docs
2021-05-06 19:28:18 +00:00
e6591f0658
code style
2021-05-06 10:43:42 -04:00
aaad9256a3
Auto-generated configs and docs
2021-05-06 14:01:30 +00:00
ec3f5466c8
code style
2021-05-06 09:58:36 -04:00
9705921afd
Update date
2021-05-06 00:54:21 +00:00
b2cf56a5ff
Auto-generated configs and docs
2021-05-05 14:59:17 +00:00
a9b83d17e3
Auto-generated configs and docs
2021-05-05 14:04:51 +00:00
19ebd48b24
Update date
2021-05-05 00:55:28 +00:00
b775331a3c
Auto-generated configs and docs
2021-05-04 19:13:38 +00:00
370180965e
Auto-generated configs and docs
2021-05-04 14:14:18 +00:00
892b03524b
Lua debug channels ( #2620 )
...
* setdebug hook
* add debug mode
* memory size debug channel
* default script
2021-05-04 10:05:39 -04:00
6e1212f3ca
use setTable ( #2621 )
2021-05-04 10:03:41 -04:00
0117dc2dd4
use static buffer for lua heap, enable on f429 ( #2619 )
...
* static buffer for lua
* enable lua for 429
2021-05-04 01:03:17 -04:00
ee73067251
Update date
2021-05-04 00:58:28 +00:00
088ed3c28e
interactive lua ( #2614 )
...
* interactive lua
* unnecessary pop
* print return value
* enable f7 lua
* match f7 chconf
2021-05-03 17:46:12 -04:00
b20505de42
2021 is the year of Hellen
2021-05-03 00:01:53 -04:00
bf223aaacf
50% duty cycle is the default for tach signal
2021-05-02 23:47:47 -04:00
fa4f936869
docs
2021-05-02 23:46:30 -04:00
becf33b240
2021 is the year of Hellen
2021-05-02 23:45:39 -04:00
c168a1125f
Update date
2021-05-03 01:02:39 +00:00
59c8ef582f
2021 is the year of Hellen
2021-05-02 19:02:30 -04:00
60ab58c1c8
2021 is the year of Hellen
2021-05-02 18:52:33 -04:00
2ca3a8968a
Auto-generated configs and docs
2021-05-02 22:20:31 +00:00
ce3fd7daca
Update date
2021-05-02 01:07:30 +00:00
4133f5c11f
Auto-generated configs and docs
2021-05-02 00:35:02 +00:00
81a8239ba8
Auto-generated configs and docs
2021-05-01 23:47:11 +00:00
69d0b15345
Auto-generated configs and docs
2021-05-01 19:42:36 +00:00
c1cbd03a1f
Update date
2021-05-01 01:03:02 +00:00
3be5b8db2f
Auto-generated configs and docs
2021-04-30 15:03:28 +00:00
d15d721006
Auto-generated configs and docs
2021-04-30 05:39:53 +00:00
f3f5e4215d
Auto-generated configs and docs
2021-04-30 05:10:36 +00:00
de72978255
Refactoring, technical debt: export more of trigger attributes into triggers.txt file #2077
2021-04-30 01:05:23 -04:00
5d4cec71bf
nope, this one is not dead
2021-04-29 23:51:22 -04:00
d4edf7a0eb
like that maybe?
2021-04-29 23:39:47 -04:00
b289f7f037
dead files?
2021-04-29 23:33:30 -04:00
720d08cdd0
Auto-generated configs and docs
2021-04-30 03:19:47 +00:00
c17ccd7c32
Auto-generated configs and docs
2021-04-30 03:02:06 +00:00
ea781b55c6
Auto-generated configs and docs
2021-04-30 02:46:12 +00:00
db8a4fbb6f
Lua tick rate hook ( #2606 )
...
* implement setTickRate
* actually load the hook
2021-04-29 22:22:31 -04:00
65a8941286
more Lua hooks ( #2605 )
...
* more hooks
* zero index
* test table hook
* test works
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-04-29 22:22:04 -04:00
e45a7da7bd
Update date
2021-04-30 01:00:58 +00:00
fe1d6a2e17
Auto-generated configs and docs
2021-04-29 21:37:27 +00:00
e3bb6c7bdb
encapsulate in smart pointer ( #2603 )
...
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-04-29 07:44:32 -04:00
54fca52e42
sensor_type values ( #2604 )
...
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-04-29 07:43:46 -04:00
a470c1eec1
lua 5.4 ( #2590 )
...
* thread priority
* build
* makefile prep
* call startup
* lua 5.1
* mk
* 5.3
* mk
* I guess lua does something?
* extract hooks, builds for tests
* a bit of error handling
* guard
* bootloader makefile
* remove lua
* submodule
* submodule update
* builds with submodule
* disabled by default
* h7 chconf
* tweaks
* add a useful hook
* move luaconf
* perf trace lua
* test helpers
* lua unit tests
* include to satiate clang
2021-04-28 22:41:25 -04:00
86336efeaa
Update date
2021-04-29 01:02:17 +00:00
bb53ce64bc
Auto-generated configs and docs
2021-04-28 22:55:13 +00:00
1bd789a5a5
make wideband log fields match what it's actually sending ( #2593 )
...
* make log fields match what it's actually sending
* update wb firmware
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-04-28 18:28:29 -04:00
eb3dd0e216
Update date
2021-04-28 01:04:11 +00:00
addf97ee08
prep for lua ( #2589 )
...
* thread priority
* build
* makefile prep
* call startup
* s
2021-04-27 07:57:08 -04:00
8f06e1c0c6
higher priority for log buffer flush ( #2592 )
2021-04-27 07:52:12 -04:00
f847bde49f
Auto-generated configs and docs
2021-04-26 21:59:44 +00:00
cb7cb8ae15
https://rusefi.com/forum/viewtopic.php?p=40654
2021-04-26 17:32:00 -04:00
0a4e7b9c50
Auto-generated configs and docs
2021-04-26 03:12:08 +00:00
e84750de40
Auto-generated configs and docs
2021-04-26 01:46:15 +00:00
43e17ef9dd
Update date
2021-04-26 01:07:19 +00:00
99059ef846
https://rusefi.com/forum/viewtopic.php?f=16&t=1996
2021-04-25 09:34:40 -04:00
f1c05a7ab7
Auto-generated configs and docs
2021-04-25 13:24:53 +00:00
87e0b28cc4
https://rusefi.com/forum/viewtopic.php?f=16&t=1996
2021-04-25 09:18:35 -04:00
060b8b9c87
https://rusefi.com/forum/viewtopic.php?f=2&t=1993
2021-04-24 22:54:50 -04:00
32ba08d5ff
Update date
2021-04-25 01:08:47 +00:00
003f5b1cfa
Haltech dash support ( #2570 )
...
* prep for cycletimes
* not it should build
* Defined and used cyclic messages
- defined cyclic messages for dash support
- hardcoded canwrite periodic task at 5ms to ensure correct timing
* tweaks
Update W202/VW candash cyclic config
fix canverbose cycle time configuration from TS
* Update can_dash.cpp
Haltech message definitions
* Update can_dash.cpp
* added HaltechDash
- changed CanTx cycle time
- inject cycle times to dash handlers
- implement first version of HaltechDash
* missed it
while merge with upstream/master
2021-04-24 17:40:48 -04:00
f200be7100
Update date
2021-04-24 01:04:32 +00:00
4ea719c60c
Handle can message cyclicity ( #2573 )
...
* Handle can message cyclicity
update of canDash to support different cyclicity of messages
* review updates
2021-04-23 20:16:27 -04:00
7300bbe750
improving QC process
2021-04-23 00:45:36 -04:00
6c75a3d7b4
improving QC process
2021-04-22 22:04:39 -04:00
7e4e22f544
Merge remote-tracking branch 'origin/master'
2021-04-22 21:27:15 -04:00
be0f2210c5
improving QC process
2021-04-22 21:23:20 -04:00
df04dd2c7a
Update date
2021-04-23 01:04:11 +00:00
e3cbb939ec
Update date
2021-04-22 01:04:15 +00:00
b6fc9befc8
finish it off: remove scheduleMsg ( #2575 )
...
* finish it off
* one more logger ptr
* fwd decl
* Revert "one more logger ptr"
This reverts commit a21fb0087ddc748978d716db2710800cf26e437b.
* unused
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-04-21 15:33:40 -04:00
5f0791f9fb
Destroy all shared logger ( #2574 )
...
* most of shared logger
* a few more
* one more
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-04-21 14:28:48 -04:00
737ee444b8
rip the bandaid: find-replace most of scheduleMsg ( #2572 )
...
* biiiig find replace
* more trivial find replace
* pwm
* almost all of them
* few more
* gpio
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-04-21 12:53:13 -04:00
f97216d21f
Update date
2021-04-21 01:03:01 +00:00
8cfb63455d
Logging remove 3 ( #2568 )
...
* ts logger
* sensors
* wideband too
* missed one
* init
* motors, pid, etc
* vvt
* more
* idle
* missed one
* dynoview
* launch
* can
* console IO
* s
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-04-20 14:09:41 -04:00
1694380bf6
Auto-generated configs and docs
2021-04-20 03:56:24 +00:00
f0fc0acdc4
Auto-generated configs and docs
2021-04-20 03:35:59 +00:00
045b61a23c
Update date
2021-04-20 01:03:45 +00:00
967383dd8e
remove simple cases of LoggingWithStorage ( #2569 )
...
* remove simple cases
* more simple
* serial
* s
* more
* try memory
* easy
* mmc acc
* that's how much memory
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-04-19 08:11:59 -04:00
f0b8ab8864
Update date
2021-04-19 01:03:12 +00:00
992c16b4af
logging cleanup 2: sensors, pid, etb, etc ( #2567 )
...
* ts logger
* sensors
* wideband too
* missed one
* init
* motors, pid, etc
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-04-18 20:02:32 -04:00
babb43013f
rewrite text logging system ( #2439 )
...
* minor cleanup
* enable mailboxes
* priority
* implement new logger
* more cleaning
* signature
* remove debug
* put the assertion back in
* remove debugging
* spelling
* doy
* tweaks & comments
* cleaning
* size_t
* guard more
* test build now
* needs more ram until we can remove LogginWithSTorage
* hunt for memory
* bootloader
* unused
* stub simulator
* it would help to get the signature right
* geez kinetis only has 64k ram
* more guarding because kinetis
* that's now very legal and very cool
* templatify
* s
* force null terminate
* probably fix
* const
* write a test
* disable sensor chart for now
* hide SC ui
* oh nope that breaks many things
This reverts commit c3c1bb324fb484c3d9cc44b7715c234bc0392e1e.
* missed one
* reset after scheduleLogging
* we can't print out the full message because it contains commas which break parsing
* force terminate long buffers
* let's see how much memory we have to play with
* a lot, is the answer
* real thread name
* shrink this for now before its deleted
* turn that back on
* biiig comment
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-04-18 18:46:47 -04:00
959a63d7de
hellen64 scripts and pinout #2565
2021-04-18 10:42:50 -04:00
e155a32186
Auto-generated configs and docs
2021-04-18 13:37:46 +00:00
7da6b4fa67
use cylinders_count_t in loops through cylinders ( #2563 )
...
to supress signed vs usigned warnings
2021-04-18 08:58:56 -04:00
9fa1edb53b
Update date
2021-04-18 01:04:54 +00:00
85194f7135
Update date
2021-04-17 01:01:34 +00:00
28bb808eb9
Update date
2021-04-16 01:02:48 +00:00
9c1aa580f1
WOW major scheduling drama on NB2 running with Proteus #2533
2021-04-15 19:12:09 -04:00
f0c98325be
WOW major scheduling drama on NB2 running with Proteus #2533
...
totally same numbers for NB1 just simpler code
2021-04-15 18:44:37 -04:00
6bc7a0e134
WOW major scheduling drama on NB2 running with Proteus #2533
...
removing weird comments
2021-04-15 18:22:23 -04:00
5aa4bff04c
Auto-generated configs and docs
2021-04-15 20:50:35 +00:00
a8bfcacc53
Auto-generated configs and docs
2021-04-15 05:23:00 +00:00
8bb32b2199
gppwm zero option ( #2557 )
...
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-04-15 01:08:34 -04:00
4fc78d22b7
Update date
2021-04-15 01:03:18 +00:00
2debd4bb46
Auto-generated configs and docs
2021-04-14 01:18:43 +00:00
c38e6a21ec
Update date
2021-04-14 01:01:21 +00:00
774f4416a7
constexpr-ify log field list ( #2548 )
...
* constexprify
* reclaim ram
* more constexpr
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-04-13 20:16:18 -04:00
28afbd648b
dead code - same value set by 's->initialize'
2021-04-13 01:11:03 -04:00
80adaadd7a
Kawasaki KX450F trigger wheel #2538
2021-04-13 00:24:52 -04:00
d428e20f6b
Update date
2021-04-13 01:06:18 +00:00
4baea664d8
Auto-generated configs and docs
2021-04-12 18:12:58 +00:00
d7e95cd31f
improve sensor chart flush behavior ( #2545 )
...
* disable sensor chart
* type signature, guards
* we can't log the message as that confuses the parser
* dead
* this syntax was technically illegal
* more
* turn it back on
* remove config
* api
* implement
* ui
* java ui
2021-04-12 14:05:52 -04:00
d13fa8d1f3
Auto-generated configs and docs
2021-04-12 12:25:48 +00:00
15de7b8c5d
check if flash erase failed ( #2543 )
...
* check flash erase result
* format
* string
* s
2021-04-12 08:18:11 -04:00
92afc69055
Auto-generated configs and docs
2021-04-12 04:26:37 +00:00
4b8d198c4b
Update date
2021-04-12 01:06:03 +00:00
448dafb5f2
https://rusefi.com/forum/viewtopic.php?p=40383
2021-04-11 18:20:35 -04:00
5968149584
https://github.com/rusefi/hellen72/issues/25
2021-04-10 23:30:36 -04:00
067bdc188f
https://github.com/rusefi/hellen72/issues/25
2021-04-10 23:22:25 -04:00
4e7943c6cd
Update date
2021-04-11 01:06:44 +00:00
6a2a6da67f
multiple mass storage ( #2535 )
...
* driver
* plumbing
* guard adjust
* read correct lun
* de-template
* rearrange
* guard
* guard
* memory
* headers
* memory
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-04-10 08:35:41 -04:00
e4f89bb0ce
Update date
2021-04-10 01:03:45 +00:00
2547283f45
Kawasaki KX450F trigger wheel #2538
2021-04-09 12:44:28 -04:00
06ada8562b
Kawasaki KX450F trigger wheel #2538
2021-04-08 22:16:14 -04:00
d1f4709d55
Auto-generated configs and docs
2021-04-09 02:10:22 +00:00
09ef712995
Update date
2021-04-09 01:00:43 +00:00
80d080da6f
helping us trace CUSTOM_FSIO_STACK_SIZE
2021-04-08 15:59:42 -04:00
c3270fb715
helping us trace CUSTOM_FSIO_STACK_SIZE
2021-04-08 15:15:12 -04:00
ffe845ab1a
CUSTOM_ERR_VVT_OUT_OF_RANGE warning false-positive fix #2534
2021-04-08 14:39:26 -04:00
d626f3d370
Update date
2021-04-08 01:07:00 +00:00
67a6ecb595
Auto-generated configs and docs
2021-04-07 20:46:09 +00:00
02406641c6
trigger and VVT duty cycle integration into limp manager #2523
2021-04-07 16:44:21 -04:00
3d89cc2093
trigger and VVT duty cycle integration into limp manager #2523
2021-04-07 15:17:01 -04:00
c5c8d4fc22
Auto-generated configs and docs
2021-04-07 16:18:41 +00:00
c886394947
trigger and VVT duty cycle integration into limp manager #2523
2021-04-07 12:16:23 -04:00
9c26a84be9
trigger and VVT duty cycle integration into limp manager #2523
2021-04-07 01:21:28 -04:00
5971428b1d
Update date
2021-04-07 01:02:55 +00:00
6a7c0b689c
Update date
2021-04-06 01:03:54 +00:00
a137d2c3e6
Auto-generated configs and docs
2021-04-05 19:58:54 +00:00
7782ebd7b4
Ford redundant ETB tps ( #2519 )
...
* ford tps
* configurable maximum
* initialization
* check consistency when in the low range
* print info
* default
* config field
* config parameter
* test
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-04-05 15:57:03 -04:00
a9e822f790
'displayLogicLevelsInEngineSniffer' on VVT input reports too much into engine sniffer fix #2528
2021-04-04 23:12:07 -04:00
f8aa71bf63
refactoring
2021-04-04 23:03:51 -04:00
549839b0de
engine sniffer into unit tests
2021-04-04 22:41:38 -04:00
4a94e65a2e
code style?
2021-04-04 22:09:22 -04:00
181db048fe
todo?
2021-04-04 22:05:55 -04:00
962026f33b
Update date
2021-04-05 01:05:40 +00:00
e23a3d39c0
Auto-generated configs and docs
2021-04-05 00:01:45 +00:00
a0053d5845
hip9011 and friends ( #2527 )
...
* engine math: extrant getFiringOrderTable for reuse
* engine math: getNextFiringCylinderId helper
* introduce knock_logic: first member is getCylinderKnockBank()
moved from software_knock.cpp
* hip9011: support two inputs/banks
* fix CI
* Board Subaru EG33: populated with TPIC8101 with Advanced mode
* hip9011: test communication in advanced mode
* hip9011: handle situation when chip is already in advanced mode
* Board Subaru EG33: cylinder to knock bank mapping
* hip9011: count spi transactions in advansed mode too
* hip9011: reset incalid responce counter after chip initialization
* hip9011: make debug output more structured
2021-04-04 18:13:21 -04:00
9871ab15b2
linking error on jenkins and Andrey's windows desktop fix #2520
2021-04-03 23:34:56 -04:00
2aa9b3cd57
Update date
2021-04-04 01:05:14 +00:00
d1e86436dd
Auto-generated configs and docs
2021-04-04 00:31:15 +00:00
8e17acdab9
Update date
2021-04-03 01:01:42 +00:00
c8fe69a952
Update date
2021-04-02 01:10:09 +00:00
d6c9f1d84f
aux temp ( #2515 )
2021-03-31 22:54:59 -04:00
8aed80c332
not all listeners are sensors ( #2514 )
...
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-31 22:51:49 -04:00
e12f07ffc0
Update date
2021-04-01 01:03:41 +00:00
761e65c710
make board config override actually usable ( #2508 )
...
* new function
* hellen
* MRE
* proteus
* put those function declarations in a reasonable place
* put the comment back
* weak
* move that to a reasonable place
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-31 14:46:50 -04:00
cd03d83c2b
Update date
2021-03-31 00:57:56 +00:00
112b4d1182
Hip9011 ( #2512 )
...
* hip9011: coexistance with other spi devices
* hip9011: rework so SPI transfer is invoked from thread
also use polling spi exchange to avoid cache problems
* hip9011: move calculations from ADC callback to thread
* hip9011: big cleanup
* hip9011: simplify spi communication
* No need to set knockBandCustom if it is not custom
HIP9011 calculates knockBand from cylinderBore same way
* hip9011: make unit test happy
* hip9011: fix unit test
* hip9011: remove duplicated initialization, reorder
* hip9011: just renames and data type adjustments
* hip9011: rename BAND() to HIP9011_BAND()
* hip9011: move some code from lookup.cpp to logic.cpp
* hip9011: move initEngineNoiseTable to engine_configuration.cpp
* hip9011: move lookup tables to hip9011_logic.c
* hip9011: remove empty files
* hip9011: additional checks
2021-03-30 10:56:25 -04:00
9810406fa6
fix ( #2511 )
2021-03-30 07:28:22 -04:00
23c73791bd
Update date
2021-03-30 01:00:14 +00:00
96d59b4629
Auto-generated configs and docs
2021-03-29 13:06:35 +00:00
f24c15a9a2
More gppwm and fsio ( #2509 )
...
* gppwm aux temp
* fsio fuel flow rate and oil pressure
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-29 08:57:37 -04:00
32cedfd08d
Update date
2021-03-29 01:03:37 +00:00
87a8cb9a78
Auto-generated configs and docs
2021-03-28 12:41:23 +00:00
ccac435c92
Auto-generated configs and docs
2021-03-28 12:09:36 +00:00
204aa33e9a
goodbye ignitionOffset ( #2503 )
...
* remove
* set the timing map to do what the offset used to do
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-28 08:00:09 -04:00
947d335a20
Update date
2021-03-28 01:01:53 +00:00
ead0e378e8
Auto-generated configs and docs
2021-03-27 23:02:46 +00:00
5fda278503
hip9011: get callback from spark on each cylinder ( #2499 )
...
* hip9011: get callback from spark on each cylinder
* hip9011: cleanup unused
2021-03-27 14:12:49 -04:00
7de5e303a3
Update date
2021-03-27 01:00:23 +00:00
ce142907a0
replace print/printMsg with scheduleMsg ( #2497 )
...
* start cleaning
* disabled feature means don't print that it's disabled
* cli
* usages
* printMsg -> scheduleMsg
* this is alllll dead now
* no crlf please
* all hope is lost if you manage to hit this line
* tests
* tests
* ok we did actually need that part
* sim
* d
* kinetis
* it did ifdef, not if
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-26 17:23:26 -04:00
743d7ffa90
Update date
2021-03-26 00:53:17 +00:00
cc566744be
write flash on separate thread for H7 ( #2490 )
...
* write flash on separate thread for H7
* cleanup
* getting the parameters in the correct order generally helps
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-25 18:44:41 -04:00
368415972e
read configuration from flash exactly once ( #2481 )
...
* early hw init
* s
* read configuration exactly once
* cleanup
* housekeeping
* test friendly
* ugh bad merge
* that is a noop
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-25 18:16:26 -04:00
2839c6f069
use cpp ( #2493 )
2021-03-25 18:12:17 -04:00
4e1d30f86d
plumbing for multiple vvt ( #2488 )
...
* plumb multiple vvt
* fix test
* s
* fix barra while we're at it
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-25 07:39:23 -04:00
904717b77b
Update date
2021-03-25 00:29:25 +00:00
59c589a177
Update date
2021-03-24 00:49:15 +00:00
00f7b19e0d
Auto-generated configs and docs
2021-03-24 00:29:05 +00:00
7cdd6f8228
Auto-generated configs and docs
2021-03-23 19:20:23 +00:00
e9cd88a926
Update date
2021-03-23 00:48:35 +00:00
92d249918b
rename setBoardConfigurationOverrides ( #2479 )
...
* rename
* proteus
* comments
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-22 14:15:09 -04:00
335d55b48d
Auto-generated configs and docs
2021-03-22 11:54:44 +00:00
db7856523c
barra vvt cam pattern ( #2483 )
...
* barra vvt cam pattern
* two tooth sync
* I think this needs to be here too
2021-03-22 07:48:29 -04:00
77b0b8f5d2
Update date
2021-03-22 00:49:10 +00:00
0b021cf416
Update date
2021-03-21 00:51:23 +00:00
1162e5e75b
time_since_boot should be used in MAIN_RELAY_LOGIC #2258
...
safer implementation for now
2021-03-20 12:47:02 -04:00
aa05ff195d
Hip9011 and cleanups ( #2477 )
...
* hip9011: move hipCs out of EnginePins to hip9011 driver
* hip9011: cleanup debug output, save few RAM bytes
* Supress few signed vs unsigned warnings
2021-03-20 08:40:36 -04:00
3cfbd336e2
Update date
2021-03-20 00:48:31 +00:00
1144514671
Auto-generated configs and docs
2021-03-19 21:20:54 +00:00
2bf833a1ee
Usable fuel consumption data/gauges ( #2474 )
...
* fuel consumption
* gauge names
* consumers
* obd
* binary logging
* doesn't need explicit constructor
* getters
* it works
* correct for injections per cycle
* datalog
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-19 17:04:42 -04:00
62c38de068
Auto-generated configs and docs
2021-03-19 12:41:10 +00:00
5e6746c3aa
Implement nonlinear fuel level sender ( #2473 )
...
* table function
* config fields
* sensor type
* switch consumers
* init the sensor
* ui
* 1mv resolution
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-19 08:39:08 -04:00
c16757b75a
Update date
2021-03-19 00:49:12 +00:00
d9f58c2993
fix ( #2471 )
2021-03-18 04:02:32 -04:00
058046ceb0
Update date
2021-03-18 00:48:10 +00:00
925a6ca086
harden against various no-boot scenarios ( #2468 )
...
* zero length trigger
* validate config
* validate cylinder count
* wrong type on cylinder count
* invalid comment
* invalid SPI
2021-03-17 09:24:13 -04:00
d32e1bba4f
Update date
2021-03-17 00:48:26 +00:00
2dc0c9306f
Update date
2021-03-16 00:47:02 +00:00
c168c748ea
dead code, warnings ( #2461 )
2021-03-15 10:23:19 -04:00
10a5d1fd76
set 50% target for ETB autotune ( #2459 )
...
* 50% target for autotne
* pass target in
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-15 08:54:55 -04:00
d84c4e28f3
Update date
2021-03-15 00:48:29 +00:00
910f46267f
VVT uses closed loop controller framework ( #2453 )
...
* vvt uses framework
* builds
* rename, update headers
* s
* testable
* write some basic tests
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-14 19:31:46 -04:00
7b66ec5cf3
VAG MQB
2021-03-14 17:40:33 -04:00
8fd70f63a1
Auto-generated configs and docs
2021-03-14 21:30:08 +00:00
99787df047
VAG MQB
2021-03-14 17:27:26 -04:00
3d9483144a
Auto-generated configs and docs
2021-03-14 21:22:47 +00:00
4171ab2d11
Add set wideband index buttons ( #2455 )
...
* update wideband firmware
* implement index set
* bench test, error on failure
* guard wideband
2021-03-14 17:20:50 -04:00
962e0b32e7
fix error/warning buffer overflow ( #2456 )
...
* fix error printing overflow
* make the worst offender shorter
* error as warning
* these don't need that flag set
2021-03-14 09:31:11 -04:00
55b7a60f06
Update date
2021-03-14 00:50:10 +00:00
765895d913
Fuel pressure sensor checks ( #2449 )
...
* test for missing sensor
* test negative pressure delta checking logic
* test new hasSensor logic
2021-03-12 23:32:41 -05:00
da272532ff
Auto-generated configs and docs
2021-03-13 04:21:15 +00:00
8e9c938434
Auto-generated configs and docs
2021-03-13 03:33:50 +00:00
ce848c06a6
Update date
2021-03-13 00:46:26 +00:00
5b25a39955
Auto-generated configs and docs
2021-03-12 05:18:18 +00:00
72214b8b77
default config, UI tweaks ( #2444 )
...
* s
* fix this while we're at it
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-12 00:16:24 -05:00
9f90387d09
vBatt -> SensorType::vBatt fix #2260
2021-03-11 23:07:18 -05:00
98eae45094
vBatt -> SensorType::vBatt #2260
2021-03-11 22:52:34 -05:00
416c65b475
vBatt -> SensorType::vBatt #2260
2021-03-11 22:44:59 -05:00
a0a6e445dd
Merge remote-tracking branch 'origin/master' into master
2021-03-11 22:44:11 -05:00
5d6db3fbc5
my bad
2021-03-11 22:42:59 -05:00
ffb55722fb
Update date
2021-03-12 00:47:42 +00:00
b56bc1f167
"onTime above limit %dus", TOO_FAR_INTO_FUTURE_US
2021-03-11 14:05:15 -05:00
08081f179f
Auto-generated configs and docs
2021-03-11 13:40:39 +00:00
ce3878949c
stop trigger emulator PWM when disabled ( #2443 )
...
* simplify trig emulator
* spelling is hard
* fix various builds
* spelling again
* add command/button for external stimulation
* enable hw stim for HW-in-loop test
* s
* I does spelling good
* clear flag when disabled
* generate enough for console build
* don't disable that
* this test needs external stimulation enabled
* import
* ui improvements
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-11 08:38:52 -05:00
91ec7c1536
Update date
2021-03-11 00:48:02 +00:00
b3d132278d
accurate bench test ( #2441 )
...
* accurate bench test
* allow shorter pulses
2021-03-10 17:30:13 -05:00
a4687d7c5a
Update date
2021-03-10 00:47:24 +00:00
dafd28d751
enable CAN on H7 ( #2393 )
...
* enable
* guard correctly
* h7 bit timing
* allow longer frames
* allow data smaller than maximum
* mcu temperature
* typo
* tx message
* testing
* check for CAN or FDCAN
* don't need that any more
* h7 bitrate config
* undo testing
* h7-ify msg tx
* comment
* break out SID/EID macros
* guard differently
* update ChibiOS
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-09 18:54:01 -05:00
943e6078c8
logging cleanup before refactor ( #2438 )
...
* minor cleanup
* more cleaning
* signature
* spelling
* doy
2021-03-09 08:43:29 -05:00
3a291058c5
Update date
2021-03-09 00:46:44 +00:00
64a36a8003
ETB uses error accumulator ( #2435 )
...
* error accumulator
* makefile
* accumulate ETB error
* comment
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-08 19:18:35 -05:00
c954803292
TDC Trigger Position #2428
...
any single-tooth primary trigger should automatically run with "useOnlyPrimaryForSync = true;"
2021-03-08 00:00:48 -05:00
1b1bd0065d
removing dead code - initialize() sets 'true' already
2021-03-07 23:37:54 -05:00
e6d24d3010
avoid various "no connect" scenarios ( #2432 )
...
* init mmc and USB earlier
* connect USB faster
2021-03-07 20:21:42 -05:00
d7536bf059
finish off vbatt -> sensor model ( #2433 )
...
* more vbatt
* s
* goodbye voltage
* makefile
* apparently that part was in use
* include
* mocking
2021-03-07 20:18:32 -05:00
fc5aa6b690
Update date
2021-03-08 00:47:40 +00:00
506fb55f5c
Store ini filesystem in compressed block device ( #2420 )
...
* add module
* implement compressed block device
* enable for f7/h7
* script
* stub compressed image
* implement
* call the script
* headers, comments, fix init bug
* set msd options
* update chibios-contrib
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-07 19:25:34 -05:00
a7a82b1aab
remove lastTriggerToothEventTimeNt ( #2430 )
...
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-07 17:11:50 -05:00
d5bc14719e
trigger decoder timer ( #2427 )
...
* part 2
* stale comment
* include
* why was this a macro
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-07 16:35:58 -05:00
abdce83190
virtual zero timer ( #2426 )
...
* virtual zero timer
* it would help to call the correct function
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-07 15:32:41 -05:00
b43b22c8dc
Update date
2021-03-07 00:49:24 +00:00
bd58c2cdc0
Auto-generated configs and docs
2021-03-06 02:09:06 +00:00
80d6a84ddd
Auto-generated configs and docs
2021-03-06 01:48:51 +00:00
ea78c87b0f
Auto-generated configs and docs
2021-03-06 01:45:12 +00:00
382d45c18c
Auto-generated configs and docs
2021-03-06 01:34:46 +00:00
306737f17d
Auto-generated configs and docs
2021-03-06 01:00:28 +00:00
05e34512dd
Update date
2021-03-06 00:46:28 +00:00
b2a3b3b1b2
Auto-generated configs and docs
2021-03-06 00:30:16 +00:00
9a8c2516ee
Add two new V8 firing orders ( #2423 )
...
* fix typos, spelling
* add two V8 firing orders
* use the available number of CPU cores, not just 4
* add new firing orders to config
* updating generated files to include new v8 firing orders
* reverting update of auto-generated files
* correct firing order labels for new firing orders
2021-03-05 19:28:17 -05:00
b8dc34493c
Auto-generated configs and docs
2021-03-05 22:44:12 +00:00
960afe1514
Auto-generated configs and docs
2021-03-05 03:41:12 +00:00
122f31fe4a
hook up lps25 on proteus ( #2418 )
...
* hook up lps25
* it would help to include all the files
* unguard some stuff
* unguard more
* guarding
* s
* guard
* only register if init worked
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-04 22:39:20 -05:00
7430bad8d7
Auto-generated configs and docs
2021-03-05 02:01:14 +00:00
3ed32baf46
Update date
2021-03-05 00:47:05 +00:00
625f0fd121
Update date
2021-03-04 00:46:46 +00:00
ccbc4f2a2a
Auto-generated configs and docs
2021-03-03 12:32:56 +00:00
89d71e4379
Compute injection duration later in the pipeline ( #2175 )
...
* injector model, test
* new math
* inject fuel based on new math
* tests
* fix
* it should work like this
* format
* update TPS AE even when we're cutting fuel
* comment
* conversion factor
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-03 07:30:56 -05:00
59ecd6d594
Auto-generated configs and docs
2021-03-03 03:16:19 +00:00
d5adf0bdfe
Update date
2021-03-03 00:45:57 +00:00
f9e610ffa0
Update date
2021-03-02 00:38:34 +00:00
9e3fb6b527
Auto-generated configs and docs
2021-03-01 14:54:41 +00:00
cd5df39d8d
Auto-generated configs and docs
2021-03-01 03:36:14 +00:00
ad177fca88
Update date
2021-03-01 00:48:45 +00:00
18324fb325
Auto-generated configs and docs
2021-03-01 00:43:17 +00:00
a3e09408a3
Auto-generated configs and docs
2021-02-28 23:58:40 +00:00
4d080c4e86
try rpm calculator timer ( #2053 )
...
* add api
* rpm calculator
* fix fsio
* fix float
* remove wrong comment
* fix timer
* clang didn't like this
* oops
* format
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-02-28 18:56:34 -05:00
e6ae97d905
Auto-generated configs and docs
2021-02-28 21:59:46 +00:00
8ac66759ce
Auto-generated configs and docs
2021-02-28 20:45:15 +00:00
cd97a2605f
Auto-generated configs and docs
2021-02-28 12:32:47 +00:00
f8747a35bf
set all thread priorities in the same place ( #2412 )
...
* unify thread priority
* header
* mmc
2021-02-28 07:30:45 -05:00
405578d90a
Auto-generated configs and docs
2021-02-28 01:16:53 +00:00
5de4b67f6f
Update date
2021-02-28 00:48:23 +00:00
ddc9792e60
Update date
2021-02-27 00:45:37 +00:00
4fc2083cc5
Auto-generated configs and docs
2021-02-26 22:40:02 +00:00
2e3985657c
Auto-generated configs and docs
2021-02-26 19:46:59 +00:00
c4e849d143
Update submodules ( #2407 )
...
* contrib
* update wideband
2021-02-26 14:44:46 -05:00
1ffbce9d6c
Auto-generated configs and docs
2021-02-26 13:01:20 +00:00
f4e12d2c22
Update date
2021-02-26 00:45:18 +00:00
7b5c982939
Auto-generated configs and docs
2021-02-25 22:11:12 +00:00
5b5b825430
Auto-generated configs and docs
2021-02-25 18:39:40 +00:00
bd174f2977
Auto-generated configs and docs
2021-02-25 06:39:30 +00:00
429c5da521
Auto-generated configs and docs
2021-02-25 02:57:52 +00:00
50af3c95df
Update date
2021-02-25 00:48:59 +00:00
1c8a8c24c6
Auto-generated configs and docs
2021-02-24 20:04:17 +00:00
6267b525f8
Auto-generated configs and docs
2021-02-24 19:09:56 +00:00
68edc17efd
Auto-generated configs and docs
2021-02-24 13:17:30 +00:00
b6bccd2daa
Auto-generated configs and docs
2021-02-24 03:57:41 +00:00
99ac654e22
Update date
2021-02-24 00:45:24 +00:00
b80d4180ce
Auto-generated configs and docs
2021-02-24 00:20:19 +00:00
ef72cf1988
Auto-generated configs and docs
2021-02-24 00:13:13 +00:00
aa6d472166
Auto-generated configs and docs
2021-02-23 21:59:18 +00:00
350a047ead
cleanup ( #2386 )
2021-02-23 16:57:14 -05:00
f8437c80b5
Update date
2021-02-23 00:44:52 +00:00
585d66b7de
Auto-generated configs and docs
2021-02-22 21:54:33 +00:00
cf51ce14bc
Auto-generated configs and docs
2021-02-22 21:25:20 +00:00
e8c1f7915e
Auto-generated configs and docs
2021-02-22 21:03:46 +00:00
6e36603c2b
Update date
2021-02-22 00:46:17 +00:00
502051688b
Auto-generated configs and docs
2021-02-21 16:03:51 +00:00
555bd455f5
Update date
2021-02-21 00:46:44 +00:00
c9434e5024
Auto-generated configs and docs
2021-02-20 07:13:41 +00:00
17b2172587
Auto-generated configs and docs
2021-02-20 05:49:05 +00:00
b4d07f1faf
Auto-generated configs and docs
2021-02-20 03:26:09 +00:00
8839056018
Auto-generated configs and docs
2021-02-20 01:50:25 +00:00
e37e166315
Update date
2021-02-20 00:44:01 +00:00
576a194d1d
Auto-generated configs and docs
2021-02-19 22:52:43 +00:00
508982d4ab
Auto-generated configs and docs
2021-02-19 22:03:28 +00:00
670c34ca11
Auto-generated configs and docs
2021-02-19 13:00:43 +00:00
7808449263
Auto-generated configs and docs
2021-02-19 12:42:54 +00:00
277904e8eb
Update date
2021-02-19 00:53:52 +00:00
260aa6e333
Auto-generated configs and docs
2021-02-18 23:20:11 +00:00
30e7a655dc
Auto-generated configs and docs
2021-02-18 22:36:03 +00:00
1c6e33f089
Auto-generated configs and docs
2021-02-18 22:09:39 +00:00
4ca8037178
Auto-generated configs and docs
2021-02-18 21:18:58 +00:00
68780d39af
Auto-generated configs and docs
2021-02-18 20:06:38 +00:00
8a02dcd7ef
Auto-generated configs and docs
2021-02-18 05:13:23 +00:00
b00a05aa17
aux valve to CI
2021-02-18 00:11:10 -05:00
f6659cdff4
Auto-generated configs and docs
2021-02-18 04:52:54 +00:00
555080bb73
Auto-generated configs and docs
2021-02-18 04:34:52 +00:00
321fe48b27
rework FSIO LEelement ( #2374 )
...
* save
* firmware
* test parsing multiple things
* split tests
2021-02-17 23:32:44 -05:00
56792280ae
Auto-generated configs and docs
2021-02-18 01:27:52 +00:00
f7bf1856cd
Auto-generated configs and docs
2021-02-18 00:44:07 +00:00
c7168d9792
Auto-generated configs and docs
2021-02-18 00:31:12 +00:00
2c318835f6
Auto-generated configs and docs
2021-02-17 22:46:18 +00:00
b9f8978c22
no one expects to make FSIO progress
2021-02-17 10:53:35 -05:00
3354691778
trying to fix AuxValves
2021-02-17 08:57:18 -05:00
95b78a48ed
aux to vvt rename
2021-02-17 08:53:39 -05:00
1aa105a766
Update date
2021-02-17 00:44:00 +00:00
6b22b11d48
Auto-generated configs and docs
2021-02-16 22:27:43 +00:00
55facb6613
use DECLARE_ENGINE_PTR for Engine class ( #2365 )
...
* engine cleanup
* do the cleanup
* one last spot
* expand_engine noop for firmware
* simulator
2021-02-16 16:58:54 -05:00
447ab1f4a5
Auto-generated configs and docs
2021-02-16 21:10:43 +00:00
82d7354d6a
Auto-generated configs and docs
2021-02-16 16:16:51 +00:00
dbebc353a2
remove unused msg parameter ( #2360 )
...
* dead parameter
* last few
2021-02-16 09:32:16 -05:00
ba52adc205
Auto-generated configs and docs
2021-02-16 03:04:34 +00:00
196845c10f
Update date
2021-02-16 00:44:01 +00:00
c75af2ac75
properly put buffers in no-cache regions ( #2357 )
...
* configure for no cache
* this doesn't need a setting
* now we don't need invalidate
* reorder and comment
* mmc
* sw knock
2021-02-15 17:39:11 -05:00
9c18e0151f
Auto-generated configs and docs
2021-02-15 03:38:10 +00:00
df1b9aab05
Update date
2021-02-15 00:44:26 +00:00
947dcbcc20
Update date
2021-02-14 00:45:36 +00:00
5f964aa9dd
Gather Nissan CAN data #2278
...
one step back
2021-02-13 09:32:45 -05:00
2d68405d96
Gather Nissan CAN data #2278
2021-02-12 23:07:21 -05:00
adbaa27eea
Auto-generated configs and docs
2021-02-13 01:50:56 +00:00
8d74b26beb
Gather Nissan CAN data #2278
2021-02-12 20:47:12 -05:00
b120d4a8dc
Auto-generated configs and docs
2021-02-13 01:43:05 +00:00
1bad7f3e69
Auto-generated configs and docs
2021-02-13 01:30:02 +00:00
92b0b8d47b
Update date
2021-02-13 00:43:49 +00:00
babd74acd8
Update date
2021-02-12 00:43:44 +00:00
94ea5a8ecc
M62T vanos support #2243
2021-02-10 22:20:17 -05:00
33db7786d0
Auto-generated configs and docs
2021-02-11 02:49:50 +00:00
b79fb2ac5f
M62T vanos support #2243
2021-02-10 21:44:21 -05:00
20252d0c79
Auto-generated configs and docs
2021-02-11 01:23:22 +00:00
dcbcd21964
Merge remote-tracking branch 'origin/master' into master
2021-02-10 19:51:27 -05:00
8d730b6ea9
M62T vanos support #2243
2021-02-10 19:51:14 -05:00
703547ff74
Update date
2021-02-11 00:43:33 +00:00
a283051a49
Auto-generated configs and docs
2021-02-10 23:57:38 +00:00
f312c9ab94
M62T vanos support #2243
...
need a bit of RAM
2021-02-10 13:31:39 -05:00
6c9416daa9
aux pid is now VVT
2021-02-10 12:41:38 -05:00
bd441017ea
Auto-generated configs and docs
2021-02-10 17:26:25 +00:00
a3d0b61cf1
get mcu temperature within port ( #2326 )
...
* remove EFI_ADC_TEMP_SENSOR
* implement
* comment
* s
* switch adc_inputs over
* header
* s
* I think aligned-on-stack should work ok
* num channels
* cache safety
* move adc init too
* don't compile that file for the h7
* cypress & kinetis
* ports
* guard against bootloader
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-02-09 22:04:36 -05:00
f27b4ba4e0
Update date
2021-02-10 00:42:28 +00:00
9e31ea8abb
Auto-generated configs and docs
2021-02-09 19:01:08 +00:00
5b47578f3b
M62T vanos support #2243
2021-02-09 09:40:08 -05:00
1539bb56ed
Merge remote-tracking branch 'origin/master' into master
2021-02-09 00:34:32 -05:00
e1f5fff949
M62T vanos support #2243
...
RAM everything takes a bit of RAM
2021-02-09 00:29:04 -05:00
6a37d337af
Auto-generated configs and docs
2021-02-09 05:26:52 +00:00
9dcc54644d
M62T vanos support #2243
...
RAM everything takes a bit of RAM
2021-02-09 00:08:00 -05:00
1ae2b1220a
Auto-generated configs and docs
2021-02-09 04:49:57 +00:00
9147c77ec3
Auto-generated configs and docs
2021-02-09 04:23:45 +00:00
d0a5cb6e38
M62T vanos support #2243
2021-02-08 22:30:02 -05:00
654a739e6b
M62T vanos support #2243
2021-02-08 22:21:02 -05:00
f5816e47fd
Merge remote-tracking branch 'origin/master' into master
2021-02-08 22:09:13 -05:00
dc79ee1511
M62T vanos support #2243
2021-02-08 22:07:14 -05:00
f99dd454e6
Auto-generated configs and docs
2021-02-09 02:52:50 +00:00
8fa1a6530b
M62T vanos support #2243
2021-02-08 21:50:31 -05:00
d39b285834
M62T vanos support #2243
2021-02-08 21:28:57 -05:00
1012b61e02
M62T vanos support #2243
2021-02-08 20:38:38 -05:00
ab53458188
Update date
2021-02-09 00:43:35 +00:00
2ccb75a064
refactoring: naming consistency
2021-02-08 18:20:53 -05:00
4b8a92ccc9
M62T vanos support #2243
2021-02-08 18:08:26 -05:00
f1e80a2761
M62T vanos support #2243
2021-02-08 16:42:53 -05:00
78df36bad7
Auto-generated configs and docs
2021-02-08 21:41:57 +00:00
8cc6ef83f9
h7 flash, guard against no CAN ( #2317 )
...
* h7 flash
* guard some other stuff
* I guess it just builds now?
* maybe ci too
2021-02-08 16:24:38 -05:00
d05edd2a3d
M62T vanos support #2243
2021-02-08 16:16:26 -05:00
f742080a6f
Auto-generated configs and docs
2021-02-08 20:31:34 +00:00
694dedf9f7
M62T vanos support #2243
2021-02-08 15:09:12 -05:00
9a66504e1e
Auto-generated configs and docs
2021-02-08 19:13:25 +00:00
c020aed330
M62T vanos support #2243
2021-02-08 14:10:57 -05:00
12fc068316
poke
2021-02-08 10:49:15 -05:00
adc363ac94
Update date
2021-02-08 00:43:33 +00:00
983d75444e
baro in sensor model ( #2306 )
...
* baro in sensor model
* missed
* typo
* init baro
* needs an include there
2021-02-07 17:54:41 -06:00
14adde123b
Auto-generated configs and docs
2021-02-07 13:48:13 +00:00
6dd99d9d10
Auto-generated configs and docs
2021-02-07 01:56:30 +00:00
11e8a35c15
Trigger pattern request Škoda Favorit fix #2302
2021-02-06 20:53:30 -05:00
4dc9c013c9
Trigger pattern request Škoda Favorit #2302
2021-02-06 20:12:58 -05:00
60630a5559
Auto-generated configs and docs
2021-02-07 00:52:02 +00:00
d183cc24e4
Update date
2021-02-07 00:45:02 +00:00
c31db3ab77
Auto-generated configs and docs
2021-02-06 18:52:00 +00:00
0f47cff952
Add subaru eg33 ( #2294 )
...
* engine: Subaru SVX EG33 engine configuration
Not tested yet. Just basic settings and placeholder
* board: add Dron_Gus's Subaru EG33 p'n'p board
* board: subaru eg33: linker script: stack, bss and heap to ram0
* board: subaru eg33: add mapping.yaml
* board: subaru eg33: scripts for autogenerated
* board: subaru eg33: fix DMA conflict (ADC1 vs SPI5)
* board: subaru eg33: enable ADC3
* board: subaru eg33: Autogenerated
* board: subaru eg33: disable fsio control of Main Relay
Default MAIN_RELAY_LOGIC cause error during parsing
* board: subaru eg33: configuration hack to fix usbconsole.c
* gen_config: generate config for Subaru SVX board too
2021-02-06 12:50:34 -06:00
04c7ad67aa
Some fixes prior to board pull request ( #2291 )
...
* ChibiOS: add support for STM32F765
This chip is used on Subaru EG33 p'n'p RusEFI board from Dron_Gus
* drivers: gpio: mc33810: commulative update
- use BIT macro
- fix wake-up method
- fix order of arguments in _add function
* port: stm32f4/7: detectCanDevice check for enabled interfaces only
* ADC: fix internal array size
internalAdcIndexByHardwareIndex should be EFI_ADC_LAST_CHANNEL size
couse adc_channel_e is used as index
* status LEDs: support status LEDs that driven by low level
2021-02-06 12:22:57 -05:00
096c67b4de
H7 compilation #2284
2021-02-05 23:57:28 -05:00
3be5714e94
H7 compilation #2284
2021-02-05 23:37:18 -05:00
a1a67a7556
Update date
2021-02-06 00:42:44 +00:00
e190f261c4
Merge remote-tracking branch 'origin/master' into master
2021-02-05 19:17:52 -05:00
0b0d66ff04
Gather Nissan CAN data #2278
2021-02-05 19:17:22 -05:00
0651dc1a79
Auto-generated configs and docs
2021-02-05 23:21:55 +00:00
9b5fa40d16
add option to disable ETB if engine not spinning ( #2280 )
...
* config/ui
* trigger central mods
* implement
2021-02-05 17:19:57 -06:00
e7900850c5
Auto-generated configs and docs
2021-02-05 16:29:43 +00:00
f4592541dd
Gather Nissan CAN data #2278
2021-02-05 11:27:51 -05:00
11f555940a
Update date
2021-02-05 00:43:18 +00:00
abb60a68c5
eliminate idle's custom applyPinState ( #2273 )
...
* remove
* not static
2021-02-04 17:04:37 -05:00
9798140584
Update date
2021-02-04 00:42:55 +00:00
e1472e8cbf
Auto-generated configs and docs
2021-02-03 19:36:47 +00:00
7fec313f50
Proteus analog input ci ( #2271 )
...
* test vbatt
* test proteus vbatt
* tolerance
* these don't work on proteus
* new engine type
* test analog input
* more test points, less tolerance
* console build needs this file generated
* only include for hw ci builds
* wiring info
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-02-03 13:34:48 -06:00
9efedc0ece
https://github.com/rusefi/rusefi/issues/2274
2021-02-03 11:37:47 -05:00
3cf6b67b87
fix #2269 ( #2272 )
...
* fix #2269
* cleanup
2021-02-03 08:04:22 -06:00
8d9db6b5c1
put vbatt in sensor model ( #2261 )
...
* vbatt in sensor model
* sensor name
* vbatt
* s
* oy vei
* a little bit of cleanup
* memory apparently
* cj125 test
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-02-03 07:55:40 -06:00
f1afc26c74
Update date
2021-02-03 00:45:57 +00:00
2bfac97f93
GM/Daewoo 60/2/2/2 Trigger Pattern #2264
2021-02-02 11:06:32 -05:00
4fc95cd9c4
Merge remote-tracking branch 'origin/master' into master
2021-02-02 09:50:37 -05:00
0f49d48a42
GM/Daewoo 60/2/2/2 Trigger Pattern #2264
2021-02-02 09:50:20 -05:00
11e2486f8f
Auto-generated configs and docs
2021-02-02 14:17:30 +00:00
2ce14cb66e
Gm map sensors ( #2265 )
...
* GM 2 and 1 Bar Map Sensors
* GM MAP Sensor Selection Options
2021-02-02 08:15:28 -06:00
782ae69cc3
GM/Daewoo 60/2/2/2 Trigger Pattern #2264
2021-02-01 23:44:14 -05:00
8ea531c129
Auto-generated configs and docs
2021-02-02 04:21:59 +00:00
6043d6d8f2
GM/Daewoo 60/2/2/2 Trigger Pattern #2264
2021-02-01 23:18:11 -05:00
7792248eb3
Auto-generated configs and docs
2021-02-02 03:52:46 +00:00
1cd6c161b8
Merge remote-tracking branch 'origin/master' into master
2021-02-01 22:50:11 -05:00
ce62edb56b
GM/Daewoo 60/2/2/2 Trigger Pattern #2264
2021-02-01 22:49:49 -05:00
51db56998f
Update date
2021-02-02 00:50:32 +00:00
c395b55399
Auto-generated configs and docs
2021-02-01 17:13:13 +00:00
0501f582c1
Auto-generated configs and docs
2021-02-01 10:41:19 +00:00
b36f700924
Merge remote-tracking branch 'origin/master' into master
2021-02-01 00:25:43 -05:00
7fb7cc6679
extracting runtime state from trigger central
2021-01-31 22:41:17 -05:00
11aa253ae9
vvt/cam events to pass index
2021-01-31 22:24:45 -05:00
b03268a1fd
Update date
2021-02-01 00:55:27 +00:00
4571ea4383
Auto-generated configs and docs
2021-01-31 22:21:02 +00:00
ace0f4e78c
Add fallback map table ( #2248 )
...
* table
* sd math
* config
* debug channel name
* ptr vs not ptr
* actually use return value
* memory
* less magic
2021-01-31 17:19:06 -05:00
0b5d42a6fd
#2260
2021-01-31 13:30:14 -05:00
4bdc41d723
typo
2021-01-31 12:27:26 -05:00
5448bbba60
Update date
2021-01-31 00:55:10 +00:00
995290ab5c
Update date
2021-01-30 00:52:18 +00:00
a3ee3e0bd5
Update date
2021-01-29 00:51:58 +00:00
cd03443dea
Limp handles inj/ign disable ( #2245 )
...
* status loop just asks limp mgr
* put logic in limp manager
* don't need that function any more
* bye
* TIL these bits already exist in the configuration
2021-01-27 21:28:53 -05:00
47e7fa4b12
Auto-generated configs and docs
2021-01-28 01:33:00 +00:00
654bf0d698
Map fallback logic, TS cleanup ( #2247 )
...
* add new field
* UI
* set default
* consume new parameter
* some cleanup while we're at it
2021-01-27 20:31:29 -05:00
GitHub set-date Action
Andrey G
Matthew Kennedy
rusefillc
shadowm60
rusefi
slowriot
rusefi
Brenton Hewitt