d2df6f9675
Auto-generated configs and docs
2021-03-29 13:06:35 +00:00
f05b8ba675
More gppwm and fsio ( #2509 )
...
* gppwm aux temp
* fsio fuel flow rate and oil pressure
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-29 08:57:37 -04:00
8b3aa6c40d
goodbye ignitionOffset ( #2503 )
...
* remove
* set the timing map to do what the offset used to do
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-28 08:00:09 -04:00
6491c83f73
read configuration from flash exactly once ( #2481 )
...
* early hw init
* s
* read configuration exactly once
* cleanup
* housekeeping
* test friendly
* ugh bad merge
* that is a noop
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-25 18:16:26 -04:00
51a5b4d6d5
rename setBoardConfigurationOverrides ( #2479 )
...
* rename
* proteus
* comments
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-22 14:15:09 -04:00
2eaa6de822
Auto-generated configs and docs
2021-03-22 11:54:44 +00:00
5e88376e2c
barra vvt cam pattern ( #2483 )
...
* barra vvt cam pattern
* two tooth sync
* I think this needs to be here too
2021-03-22 07:48:29 -04:00
650d148008
Usable fuel consumption data/gauges ( #2474 )
...
* fuel consumption
* gauge names
* consumers
* obd
* binary logging
* doesn't need explicit constructor
* getters
* it works
* correct for injections per cycle
* datalog
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-19 17:04:42 -04:00
95b08c433f
Implement nonlinear fuel level sender ( #2473 )
...
* table function
* config fields
* sensor type
* switch consumers
* init the sensor
* ui
* 1mv resolution
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-19 08:39:08 -04:00
be70524ced
harden against various no-boot scenarios ( #2468 )
...
* zero length trigger
* validate config
* validate cylinder count
* wrong type on cylinder count
* invalid comment
* invalid SPI
2021-03-17 09:24:13 -04:00
3072d54717
dead code, warnings ( #2461 )
2021-03-15 10:23:19 -04:00
ee5e73b446
Auto-generated configs and docs
2021-03-14 21:30:08 +00:00
72aa619353
VAG MQB
2021-03-14 17:27:26 -04:00
2328c1be6b
Fuel pressure sensor checks ( #2449 )
...
* test for missing sensor
* test negative pressure delta checking logic
* test new hasSensor logic
2021-03-12 23:32:41 -05:00
b087f328f7
default config, UI tweaks ( #2444 )
...
* s
* fix this while we're at it
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-12 00:16:24 -05:00
16b8fb64ca
vBatt -> SensorType::vBatt fix #2260
2021-03-11 23:07:18 -05:00
d650271077
vBatt -> SensorType::vBatt #2260
2021-03-11 22:52:34 -05:00
c7d8997a3a
vBatt -> SensorType::vBatt #2260
2021-03-11 22:44:59 -05:00
7b4ba0c836
remove lastTriggerToothEventTimeNt ( #2430 )
...
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-07 17:11:50 -05:00
881c3739a2
Add two new V8 firing orders ( #2423 )
...
* fix typos, spelling
* add two V8 firing orders
* use the available number of CPU cores, not just 4
* add new firing orders to config
* updating generated files to include new v8 firing orders
* reverting update of auto-generated files
* correct firing order labels for new firing orders
2021-03-05 19:28:17 -05:00
6aaf02be15
hook up lps25 on proteus ( #2418 )
...
* hook up lps25
* it would help to include all the files
* unguard some stuff
* unguard more
* guarding
* s
* guard
* only register if init worked
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-04 22:39:20 -05:00
5067b81fce
Compute injection duration later in the pipeline ( #2175 )
...
* injector model, test
* new math
* inject fuel based on new math
* tests
* fix
* it should work like this
* format
* update TPS AE even when we're cutting fuel
* comment
* conversion factor
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-03 07:30:56 -05:00
278e889f2c
aux valve to CI
2021-02-18 00:11:10 -05:00
39884f8934
use DECLARE_ENGINE_PTR for Engine class ( #2365 )
...
* engine cleanup
* do the cleanup
* one last spot
* expand_engine noop for firmware
* simulator
2021-02-16 16:58:54 -05:00
4a1d3de9a6
remove unused msg parameter ( #2360 )
...
* dead parameter
* last few
2021-02-16 09:32:16 -05:00
6f065274e4
aux pid is now VVT
2021-02-10 12:41:38 -05:00
85fab40d21
get mcu temperature within port ( #2326 )
...
* remove EFI_ADC_TEMP_SENSOR
* implement
* comment
* s
* switch adc_inputs over
* header
* s
* I think aligned-on-stack should work ok
* num channels
* cache safety
* move adc init too
* don't compile that file for the h7
* cypress & kinetis
* ports
* guard against bootloader
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-02-09 22:04:36 -05:00
24887adbb2
M62T vanos support #2243
2021-02-09 09:40:08 -05:00
56072ac889
M62T vanos support #2243
2021-02-08 22:30:02 -05:00
ce78123eb0
M62T vanos support #2243
2021-02-08 22:21:02 -05:00
081357ca5e
M62T vanos support #2243
2021-02-08 22:07:14 -05:00
2d99e77c95
M62T vanos support #2243
2021-02-08 21:50:31 -05:00
0d6dfbb501
M62T vanos support #2243
2021-02-08 21:28:57 -05:00
6b10de5616
refactoring: naming consistency
2021-02-08 18:20:53 -05:00
c576f0a9d9
M62T vanos support #2243
2021-02-08 18:08:26 -05:00
1ba8e24f86
M62T vanos support #2243
2021-02-08 16:42:53 -05:00
a349bf1ca8
M62T vanos support #2243
2021-02-08 16:16:26 -05:00
d2deca74bf
M62T vanos support #2243
2021-02-08 15:09:12 -05:00
d57b4b48b5
Auto-generated configs and docs
2021-02-08 19:13:25 +00:00
7e25202712
M62T vanos support #2243
2021-02-08 14:10:57 -05:00
7d3cadfc87
baro in sensor model ( #2306 )
...
* baro in sensor model
* missed
* typo
* init baro
* needs an include there
2021-02-07 17:54:41 -06:00
d95ba6b443
Trigger pattern request Škoda Favorit #2302
2021-02-06 20:12:58 -05:00
9a254634d0
Auto-generated configs and docs
2021-02-06 18:52:00 +00:00
08a5421090
Add subaru eg33 ( #2294 )
...
* engine: Subaru SVX EG33 engine configuration
Not tested yet. Just basic settings and placeholder
* board: add Dron_Gus's Subaru EG33 p'n'p board
* board: subaru eg33: linker script: stack, bss and heap to ram0
* board: subaru eg33: add mapping.yaml
* board: subaru eg33: scripts for autogenerated
* board: subaru eg33: fix DMA conflict (ADC1 vs SPI5)
* board: subaru eg33: enable ADC3
* board: subaru eg33: Autogenerated
* board: subaru eg33: disable fsio control of Main Relay
Default MAIN_RELAY_LOGIC cause error during parsing
* board: subaru eg33: configuration hack to fix usbconsole.c
* gen_config: generate config for Subaru SVX board too
2021-02-06 12:50:34 -06:00
4a6bca0a2a
Auto-generated configs and docs
2021-02-03 19:36:47 +00:00
9f0ebaac49
Proteus analog input ci ( #2271 )
...
* test vbatt
* test proteus vbatt
* tolerance
* these don't work on proteus
* new engine type
* test analog input
* more test points, less tolerance
* console build needs this file generated
* only include for hw ci builds
* wiring info
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-02-03 13:34:48 -06:00
5ceeac93e9
put vbatt in sensor model ( #2261 )
...
* vbatt in sensor model
* sensor name
* vbatt
* s
* oy vei
* a little bit of cleanup
* memory apparently
* cj125 test
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-02-03 07:55:40 -06:00
eca31a782c
Auto-generated configs and docs
2021-02-02 14:17:30 +00:00
9d9c3c266d
Gm map sensors ( #2265 )
...
* GM 2 and 1 Bar Map Sensors
* GM MAP Sensor Selection Options
2021-02-02 08:15:28 -06:00
11f9bf16f6
GM/Daewoo 60/2/2/2 Trigger Pattern #2264
2021-02-01 23:18:11 -05:00
9a2cc6b3c9
GM/Daewoo 60/2/2/2 Trigger Pattern #2264
2021-02-01 22:49:49 -05:00
4bb9762e2e
extracting runtime state from trigger central
2021-01-31 22:41:17 -05:00
0e70d08a22
Add fallback map table ( #2248 )
...
* table
* sd math
* config
* debug channel name
* ptr vs not ptr
* actually use return value
* memory
* less magic
2021-01-31 17:19:06 -05:00
6ffddb8e3a
#2260
2021-01-31 13:30:14 -05:00
5e50b542a8
typo
2021-01-31 12:27:26 -05:00
e0b2802a43
Map fallback logic, TS cleanup ( #2247 )
...
* add new field
* UI
* set default
* consume new parameter
* some cleanup while we're at it
2021-01-27 20:31:29 -05:00
bed6819d8b
normalize configuration grammar ( #2240 )
...
* modify grammar
* add missing typedefs
* these typedefs are easier to handle in the parser
* make the existing parser work with the changed format
* grumble grumble jar
* we can deal with this part later
* handle later
* deal with this later
2021-01-26 21:56:47 -05:00
1ed7d16d50
knock-knock
2021-01-23 00:00:34 -05:00
6bc882f30a
Hellen72
2021-01-22 02:02:16 -05:00
edd89c34f9
HELLEN_NB2
2021-01-22 01:47:01 -05:00
fa30efbc94
boost fixes ( #2230 )
...
* fix boost pin reinit
* call boost from periodic slow
* ui
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-01-18 07:04:14 -05:00
60f70a3721
clean up some includes ( #2227 )
...
* cleanup
* make c happy
2021-01-16 09:45:45 -05:00
bdacda558c
fix instant rpm ( #2180 )
...
* consumers
* impl
* instant rpm in idle timing
2021-01-14 20:45:55 -05:00
2e557dbcf6
make fuel math look more like ign math ( #2214 )
2021-01-14 19:18:30 -05:00
a5266cd6ef
part of 2217 which may fix it alone ( #2220 )
2021-01-11 08:01:54 -05:00
868f0d47ac
Enable idle timing/ve tables based on idle phase logic ( #2213 )
...
* add helper
* advance
* ve
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-01-11 00:54:37 -05:00
4416d1c7dc
cmd_test_main_relay
2021-01-10 23:46:50 -05:00
571122d461
Start support for multi-bank closed loop fueling ( #2184 )
...
* cfg
* cell
* N banks
* tests
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-01-10 08:10:49 -05:00
4500e1dc71
Auto-generated configs and docs
2021-01-09 19:15:01 +00:00
52e88ade01
Add TCU Solenoid debug fields ( #2202 )
...
* try adding debug fields
* oops
* include
* add labels
* add enum
* add more solenoid
* whoops
* ifdef
2021-01-09 14:12:45 -05:00
2af32084f4
gpio helper ( #2195 )
...
* gpios: isBrainPinValid helper
* LCD HD44780: do not touch pins if DM_NONE or invalid gpio
* Fix isEnabled checks for GPS and Joystick
* LCD HD44780: writePad use this method wider
2021-01-08 20:01:26 -05:00
11c358f65c
Hellen72 config ( #2200 )
...
* Hellen72 config
* Hellen72 files
Co-authored-by: Andrei <andreikagit@users.noreply.github.com>
2021-01-08 12:50:13 -05:00
7a90692187
Idle timing uses phase logic, remove falloff ( #2169 )
...
* use phase computation
* move & simplify implementation
* test
* bad merge
* initialize
* wonderful changelog
* now unused parameter
* put back deadzone
* ui
* test deadzone
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-01-07 08:06:36 -05:00
f96ae7525f
Gpio cleanup #2 ( #1530 )
...
* pin repository: PIN_USED size in now equal to brain_pin_e enum size
expect special values...
* smart gpios: register gpio chip to given base (no auto-allocation)
* drivers: gpio: core: add gpiochip_unregister()
* drivers: gpio: MC33810 intergation
* smart_gpio.cpp: cleanup ifdef mess, minor cleanups
* gpio: core: additional check for gpio ranges overlaps
* unit test: gpio chip: fixed and extended
2021-01-06 18:29:47 -05:00
eabb5c7366
flex fuel AFR interpolation ( #2190 )
...
* config
* implement flex
* secondary fuel default
* test
* test works
* rename
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-01-05 16:27:23 -05:00
b92e3086d0
Adc isAdcChannelValid helper ( #2188 )
...
* Guard define argument
* ADC: isAdcChannelValid
Check for both <= EFI_ADC_NONE and >= EFI_ADC_LAST_CHANNEL
Also check for value out of enum range (corrupted settings)
* Fix unit tests
2021-01-05 16:02:20 -05:00
15665484e5
Audi OEM 5-cyl trigger pattern aka "Tri-Tach" https://rusefi.com/forum/viewtopic.php?f=5&t=1912
2021-01-03 13:52:53 -05:00
92ea09b0a6
switch more map to read from sensor model ( #2162 )
...
* hook up map
* check for init
* switch some consumers
* that's the rest of them
* test
* tests
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-01-02 19:13:10 -05:00
d213c01ca5
questionable progress
2021-01-02 16:51:14 -05:00
8a0fa161ac
Auto-generated configs and docs
2021-01-01 06:12:01 +00:00
9587b7bb54
hellen
2021-01-01 01:10:28 -05:00
10c0553038
Auto-generated configs and docs
2020-12-31 17:41:53 +00:00
46583b2a19
Revert "Idle timing PID uses phase logic ( #2156 )"
...
This reverts commit 9634a803
2020-12-31 12:22:54 -05:00
d49fc7fc71
Haltech as dash option ( #2165 )
...
* Haltech as dash option
* Update build-firmware.yaml
added generate enums for build-primary-bundle
2020-12-31 12:22:01 -05:00
acdf6fdc85
Put map in the sensor model ( #2161 )
...
* hook up map
* check for init
* switch some consumers
* don't do limp for now
* oops
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-30 08:43:49 -05:00
9634a803f1
Idle timing PID uses phase logic ( #2156 )
...
* use phase computation
* move & simplify implementation
* test
* bad merge
* initialize
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-29 23:50:56 -05:00
f28f1e0f90
fine-grained check modes
2020-12-27 17:41:28 -05:00
898b7a82e0
move swtiches out of idle ( #2148 )
2020-12-26 21:31:41 -05:00
ff4ce2fb1f
create limp manager ( #2142 )
...
* move rev limit to limp manager
* call fatal error
* include order
* fix bug
* tests
* comment
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-26 17:30:46 -05:00
1ebce57721
proteusBoardTest
2020-12-26 10:41:33 -05:00
3d13d03424
Purge e34 config ( #2127 )
...
* remove
* enums
* s
* func test
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-24 07:31:25 -05:00
55ebe223a7
Partition configs by board type ( #2106 )
...
* remove old flag
* flags
* reorder switch
* oops
2020-12-22 21:54:40 -05:00
ba9de3a604
Purge fiesta config ( #2117 )
...
* config
* this had a feature flag?
* enums
* goodbye, fiesta
2020-12-22 17:22:05 -05:00
2d2225bfdb
PROTEUS_QC_TEST_BOARD
2020-12-22 10:13:27 -05:00
8737ba62c2
Purge rover v8 config ( #2116 )
...
* bye
* goodbye, rover v8
* that snuck in
* use a different config for that test
2020-12-22 10:05:54 -05:00
f29ca22b99
fix ( #2109 )
2020-12-20 19:31:14 -05:00
6168bcea80
Fix gpio reinit race condition ( #2098 )
...
* fix unregister api for gpio
* consumers
* guard with a critical section
* index
* guard less
* unregister under lock
* fix reinit
* dead flag
* fix most tests
* initialize properly
* initialize properly
* assertions in tests
* fix message
* we must lock earlier to be truly safe
* this was using huge memory
* devirtualize
2020-12-18 17:18:12 -05:00
50e9dd6da7
generate java enum from C enum #2102
...
one step back
2020-12-18 14:21:08 -05:00
71ba1c529c
generate java enum from C enum #2102
2020-12-18 13:33:01 -05:00
55b4e82615
naming consistency
2020-12-18 09:01:18 -05:00
aeea50ada2
move target computation ( #2091 )
2020-12-17 17:46:51 -05:00
1838beadfa
only build in config for the correct board ( #2088 )
...
* only build in config for the correct board
* undo
* undo
* undo
* only touch proteus config
* include configs in tests
2020-12-17 17:12:24 -05:00
26fbf0527a
trigger and start button pins not displayed by "pins" command fix #2084
2020-12-16 22:53:26 -05:00
a47129693a
trigger and start button pins not displayed by "pins" command #2084
...
progress but not complete fix yet
2020-12-16 22:00:42 -05:00
6151f8c334
extra data for rusEfi wideband controller ( #2082 )
...
* add config
* logic
* remove old
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-16 18:25:11 -05:00
0899102b05
returning AT validation into QC
2020-12-15 15:43:36 -05:00
bd279edd8e
pnp progress
2020-12-15 00:09:35 -05:00
9d36bab793
Debug channel updates ( #2078 )
...
* Debug channel updates
Renamed DBG_44 to Dyno_View
added DBG_LOGIC_ANALYZER
DBG_46..48 are buffers for new features
corrected ini error: [mainController.ini]:[Line:2593]: entry = wastegatePosition, "Wastegate position sensor", float, "%.3f"
* enum_regeneration
fix build issue?
2020-12-14 08:29:43 -05:00
951676e111
Merge remote-tracking branch 'origin/master' into master
2020-12-13 17:49:36 -05:00
49ee4ad78e
trigger decode should pay to attention to what wheel signal is coming from #2073
2020-12-13 17:49:24 -05:00
4ef5bf3d34
Auto-generated configs and docs
2020-12-13 22:48:42 +00:00
314e9ef580
TT_SUBARU_7_WITHOUT_6
2020-12-13 17:46:48 -05:00
48e26ec0a3
Auto-generated configs and docs
2020-12-13 21:23:35 +00:00
38bcd63e13
maybe this would just work?
2020-12-13 16:22:02 -05:00
7f65e95a65
subi
2020-12-13 11:39:10 -05:00
f2bb2ce0c6
MRE issue with tle8888 - GP3 does not work? #2065
2020-12-13 11:29:19 -05:00
b41ca74386
clang warnings again #2055
2020-12-11 12:50:10 -05:00
9b4a1fff7b
clang warnings again #2055
2020-12-11 10:33:00 -05:00
f2426677db
start fuel pump as soon as trigger events happen ( #2038 )
...
* switch pump fsio logic
* value collision
* fuel pump in tests
* mock time since trigger
* test fp
* init pin in test
* fix gpio outputs in tests
* comment
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-10 01:23:24 -05:00
ea8e09ba13
fix warnings found by clang #2014
2020-12-08 13:59:40 -05:00
67269aa637
maybe fix sensor init checks ( #2034 )
...
* enums
* don't collide
* auto_generated_enums
* check based on new enum val
* maybe this will make generate tool happy
* add a test
* fix test
* fix and add another test
* make clang happier
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-06 23:19:57 -05:00
debec1107e
subi
2020-12-06 18:08:55 -05:00
9f13d39003
MRE_SUBARU_EJ18
2020-12-06 14:16:40 -05:00
166f4fc381
MRE_SUBARU_EJ18
2020-12-06 13:08:09 -05:00
75ffe1f38e
making console happier
2020-12-05 21:56:39 -05:00
e5ef8de2ae
unit tests in clang #2012
2020-12-04 23:59:21 -05:00
864bd7fa73
Dyno view proposal ( #1999 )
...
* DynoView creation
module implementation and unit_tests
* update acc algo
we only calcualte new acceleration value if speed has changed, not on every callback.
* added acceleration ts_channel
* fixed broken unit tests
* fixed accel sign
* review updates
* Update test_dynoview.cpp
fix unit_tests
* Update engine_controller.cpp
Fix .ram4 unused size
* Update test_dynoview.cpp
2020-12-04 20:28:48 -05:00
db5e30edf5
all triggers should be documented way nicer #2001
2020-12-04 11:44:27 -05:00
0a23e82baf
6.1 Hemi V8 decoder #2010
2020-12-04 00:30:22 -05:00
4c3eae5676
FORD ST170 CAM TRIGGER PATTERN fix #2009
2020-12-03 23:54:08 -05:00
0b2e8755ee
Auto-generated configs and docs
2020-12-04 02:59:40 +00:00
c413f03359
DAIHATSU 3CYLINDER TRIGGER WHEEL SUPPORT #2008
2020-12-03 21:58:03 -05:00
77914fb702
Auto-generated configs and docs
2020-12-04 02:33:46 +00:00
c55120372b
DAIHATSU 3CYLINDER TRIGGER WHEEL SUPPORT #2008
2020-12-03 21:31:58 -05:00
662eaea384
avoid float -> int64 conversion #1977
...
both cases have to be relatively small durations of time cherry picking...
2020-12-03 13:32:01 -05:00
82c30dadf8
Auto-generated configs and docs
2020-12-03 15:51:02 +00:00
745038c4a7
more dead code
2020-12-03 10:49:20 -05:00
b2e26a2e2b
Auto-generated configs and docs
2020-12-03 06:38:53 +00:00
dd9e431782
dead code matches Mazda SOHC
2020-12-03 01:36:43 -05:00
b5b9554903
Auto-generated configs and docs
2020-12-03 06:25:01 +00:00
a2036ebc70
dead trigger, this would now be vvt+60/2
2020-12-03 01:22:57 -05:00
7855847a3f
all triggers should be documented way nicer #2001
2020-12-03 01:02:17 -05:00
479fcf0174
all triggers should be documented way nicer #2001
2020-12-03 00:19:18 -05:00
c36f76b68e
Fuel pump should turn on at the first sign of engine rotation #1961
2020-12-02 23:09:39 -05:00
b662b977fa
all triggers should be documented way nicer #2001
2020-12-02 20:51:33 -05:00
6fb745d29c
Launch Control refactoring ( #1992 )
...
* refactor
- called from periodicFastCallback
- removed defines
* Update rusefi.input
removed unused configurations.
added clutch inversion option
* Added new tests
fixed limiting only in case we have launch condition and rpm outside of window
* Update launch_control.cpp
Unintialized config update, now it is working fine with VSS and with clutch as well.
* small fixes
updated after review findings
* Fix breaking engine rev limiter
applyLaunchControlLimiting should not overwrite booleans to false!
* Delay timer in seconds
timer uses ms, so convert seconds to ms
2020-12-01 13:03:42 -05:00
d48367d565
timer ( #1994 )
2020-11-30 19:35:06 -05:00
8e1674956d
Auto-generated configs and docs
2020-11-29 03:51:15 +00:00
b982d02298
miata 94
2020-11-28 22:49:28 -05:00
89eaae8234
LM_ALPHA_N_2 rename
2020-11-27 15:44:31 -05:00
GitHub build-firmware Action
Matthew Kennedy
rusefillc
slowriot
rusefi
Andrey G
Brenton Hewitt
David Holdeman
andreika-git
shadowm60
rusefi