merge rusEFI wiki
This commit is contained in:
commit
320ab61561
10
Cranking.md
10
Cranking.md
|
@ -69,7 +69,6 @@ rusEFI has a separate cranking control strategy for your first couple of engine
|
||||||
## General Cranking Settings
|
## General Cranking Settings
|
||||||
### Cranking RPM limit
|
### Cranking RPM limit
|
||||||
*This sets the RPM limit below which the ECU will use cranking fuel and ignition logic, typically this is around 350-450 rpm.* <details><summary>More...</summary>
|
*This sets the RPM limit below which the ECU will use cranking fuel and ignition logic, typically this is around 350-450 rpm.* <details><summary>More...</summary>
|
||||||
In rusEFI Console, you can use command ```set cranking_rpm X``` to change this value.</details>
|
|
||||||
|
|
||||||
### Enable cylinder cleanup
|
### Enable cylinder cleanup
|
||||||
*When enabled, if the throttle pedal is held above 90% then no fuel is injected while cranking to clear excess fuel from the cylinders.*
|
*When enabled, if the throttle pedal is held above 90% then no fuel is injected while cranking to clear excess fuel from the cylinders.*
|
||||||
|
@ -92,9 +91,6 @@ In rusEFI Console, you can use command ```set cranking_rpm X``` to change this v
|
||||||
|
|
||||||
See also isFasterEngineSpinUpEnabled
|
See also isFasterEngineSpinUpEnabled
|
||||||
|
|
||||||
rusEFI Console command:
|
|
||||||
```set cranking_priming_pulse X```
|
|
||||||
|
|
||||||
</details>
|
</details>
|
||||||
|
|
||||||
### Falloff temperature
|
### Falloff temperature
|
||||||
|
@ -125,16 +121,12 @@ rusEFI Console command:
|
||||||
|
|
||||||
<details><summary>More...</summary>
|
<details><summary>More...</summary>
|
||||||
|
|
||||||
To adjust cranking fuel, use ```set cranking_fuel XXX``` command, where XXX is the number of total fuel squirt duration in milliseconds. See also [Console Commands - Fuel Control](Dev-Console-Commands#fuel-control)
|
|
||||||
|
|
||||||
</details>
|
</details>
|
||||||
|
|
||||||
## Ignition Settings
|
## Ignition Settings
|
||||||
### Advance
|
### Advance
|
||||||
*Ignition advance angle used during engine cranking, 5-10 degrees will work as a base setting for most engines.*
|
*Ignition advance angle used during engine cranking, 5-10 degrees will work as a base setting for most engines.*
|
||||||
|
|
||||||
*rusEFI Console command:
|
|
||||||
```set cranking_timing_angle X```*
|
|
||||||
|
|
||||||
### Use separate Advance Table for cranking
|
### Use separate Advance Table for cranking
|
||||||
|
|
||||||
|
@ -150,8 +142,6 @@ To adjust cranking fuel, use ```set cranking_fuel XXX``` command, where XXX is t
|
||||||
|
|
||||||
*If set to true, will use the specified duration for cranking dwell. If set to false, will use the specified dwell angle. Unless you have a really good reason to, leave this set to true to use duration mode.*
|
*If set to true, will use the specified duration for cranking dwell. If set to false, will use the specified dwell angle. Unless you have a really good reason to, leave this set to true to use duration mode.*
|
||||||
|
|
||||||
*rusEFI Console command:
|
|
||||||
```set cranking_charge_angle X```*
|
|
||||||
|
|
||||||
## IAC Settings
|
## IAC Settings
|
||||||
### Cranking IAC position
|
### Cranking IAC position
|
||||||
|
|
Loading…
Reference in New Issue