merge rusEFI wiki
This commit is contained in:
commit
320ab61561
10
Cranking.md
10
Cranking.md
|
@ -69,7 +69,6 @@ rusEFI has a separate cranking control strategy for your first couple of engine
|
|||
## General Cranking Settings
|
||||
### Cranking RPM limit
|
||||
*This sets the RPM limit below which the ECU will use cranking fuel and ignition logic, typically this is around 350-450 rpm.* <details><summary>More...</summary>
|
||||
In rusEFI Console, you can use command ```set cranking_rpm X``` to change this value.</details>
|
||||
|
||||
### Enable cylinder cleanup
|
||||
*When enabled, if the throttle pedal is held above 90% then no fuel is injected while cranking to clear excess fuel from the cylinders.*
|
||||
|
@ -92,9 +91,6 @@ In rusEFI Console, you can use command ```set cranking_rpm X``` to change this v
|
|||
|
||||
See also isFasterEngineSpinUpEnabled
|
||||
|
||||
rusEFI Console command:
|
||||
```set cranking_priming_pulse X```
|
||||
|
||||
</details>
|
||||
|
||||
### Falloff temperature
|
||||
|
@ -125,16 +121,12 @@ rusEFI Console command:
|
|||
|
||||
<details><summary>More...</summary>
|
||||
|
||||
To adjust cranking fuel, use ```set cranking_fuel XXX``` command, where XXX is the number of total fuel squirt duration in milliseconds. See also [Console Commands - Fuel Control](Dev-Console-Commands#fuel-control)
|
||||
|
||||
</details>
|
||||
|
||||
## Ignition Settings
|
||||
### Advance
|
||||
*Ignition advance angle used during engine cranking, 5-10 degrees will work as a base setting for most engines.*
|
||||
|
||||
*rusEFI Console command:
|
||||
```set cranking_timing_angle X```*
|
||||
|
||||
### Use separate Advance Table for cranking
|
||||
|
||||
|
@ -150,8 +142,6 @@ To adjust cranking fuel, use ```set cranking_fuel XXX``` command, where XXX is t
|
|||
|
||||
*If set to true, will use the specified duration for cranking dwell. If set to false, will use the specified dwell angle. Unless you have a really good reason to, leave this set to true to use duration mode.*
|
||||
|
||||
*rusEFI Console command:
|
||||
```set cranking_charge_angle X```*
|
||||
|
||||
## IAC Settings
|
||||
### Cranking IAC position
|
||||
|
|
Loading…
Reference in New Issue