27 lines
1.2 KiB
Markdown
27 lines
1.2 KiB
Markdown
# While you wait for your hardware #
|
|
|
|
1. [Download rusEfi bundle](Download) for your hardware.
|
|
|
|
1. Uncompress bundle, launch rusEfi console and hit "Install Drivers" button to install Virtual Com Port and ST-Link drivers. If necessary bundle would help you install java run-time.
|
|
|
|
|
|
|
|
3. Download and install [FTDI's usb VCP driver on your PC](http://www.ftdichip.com/Drivers/VCP.htm) - that's if you have a Frankenso or Frankenstein board with FT232 chip
|
|
|
|
4. Get friendly on the [rusEFI forums](https://rusefi.com/forum)
|
|
|
|
5. [Install TunerStudio (version 3.0.24 or newer is needed)](http://www.tunerstudio.com/index.php/downloads)
|
|
|
|
6. Start a new project, save to a folder you specify, and choose the rusefi.ini file from the bundle.
|
|
|
|
|
|
|
|
# FAQ
|
|
Q: How do I change settings? Would I need to compile source code?
|
|
|
|
A: No, majority of users use rusEfi bundle to get firmware and TunerStudio to change any settings they would need to change.
|
|
|
|
|
|
Q: Low side, high side... Too complicated! Where do I hook my coils?!
|
|
|
|
A: There is some variation between vehicles and components. Please use [rusEFI forums](https://rusefi.com/forum) for custom installation help! |