Since the wallet ecosystem may not be fully updated to handle
v5 transaction parsing at the point of NU5 activation, some
nodes may prefer to construct V4 transactions when not including
Orchard transaction components.
This change adds a CLI flag that allows node users to specify
that preference.
z_mergetoaddress doesn't currently have any mechanism for specifying
the minconf value. We don't want to default back to a minconf of 1,
as before, because we'll be selecting anchors with at least 3
confirmations by default, so the simplest change here is to make
the minconf value default to the number of anchor confirmations, and
add a configurable minconf at some point in the future. It's likely
that `z_mergetoaddress` will end up being deprecated in any case,
so this works for now.
Also, ensure that anywhere that we're attempting to obtain the Orchard
anchor that we don't attempt to get an anchor from a height below NU5
activation.
This changes anchor selection and Orchard authentication path generation
to default to select anchors at a the depth specified by the
`-orchardanchorconfirmations` CLI argument, with a default anchor
selection depth of 10 blocks.
If the value of `minconf` used for a particular call to `z_sendmany` is
less than the the set number of Orchard anchor confirmations, `minconf`
will be used instead for the Orchard anchor confirmations depth,
so that the selected anchor will be certain to contain any notes
selected to be spent.
Fixes#5644
We've decided to remove the option to allow all deprecated features,
because this has the effect that, if a user enables this flag, they
won't get the warning (and hence may forget to take action) at the time
that a feature is moved from the default-allowed set to the
default-denied set.
Co-authored-by: str4d <thestr4d@gmail.com>
This adds an `-allowdeprecated` CLI parameter whose value is a flag
indicating a deprecated feature that should be explicitly enabled.
Multiple instances of this argument may be provided. In the case that
this parameter is not provided, all currently deprecated RPC methods
that are not slated for removal in the next release remain available.
A user may disable all deprecated features entirely by providing the
string "none" as the argument to this parameter, or enable all
deprecated features, including those slated for removal, by providing
the string "all" as the argument to this parameter. In the case that
"all" or "none" is specified, multiple invocations of `-allowdeprecated`
are not permitted.
To explicitly enable only a specific set of deprecated features, use
`-allowdeprecated=<flag1> -allowdeprecated=<flagN> ...` when starting
zcashd. The following flags are recognized:
- "all" - enables all deprecated features.
- "none" - disables all deprecated features.
- "legacy_privacy" - enables the use of the deprecated "legacy" privacy
policy for z_sendmany. This causes the default behavior to conform to
the `FullPrivacy` directive in all cases instead of just for
transactions involving unified addresses.
- "getnewaddress" - enables the `getnewaddress` RPC method.
- "z_getnewaddress" - enables the `z_getnewaddress` RPC method.
- "zcrawreceive" - enables the `zcrawreceive` RPC method.
- "zcrawjoinsplit" - enables the `zcrawjoinsplit` RPC method.
- "zcrawkeygen" - enables the `zcrawkeygen` RPC method.
- "addrtype" - when this option is set, the deprecated `type` attribute
is returned in addition to `pool` or `address_type` (which contain the
same information) in the results of RPC methods that return address metadata.
That is, without having to launch with test_runner.py. There are
several places where the BITCOIND environment variable determines the
executable, but the default is "bitcoind"; change the default to
"src/zcashd". This does require running the test from the top-level
directory.
Also change the environment variable from BITCOIND to ZCASHD. This could
conceivable break someone, but it just makes too much sense not to do.
the warning before test 4r is generated by the check_z_mergetoaddress
at line 459, which moves all the sapling funds into taddr_2 and thus
expects (sapling_balance - DEFAULT_FEE) to show up into taddr_2.
However, the check_z_mergetoaddress_parallel at line 418 had already
funded taddr_2 (with the sum of taddr_1 and taddr_3), and so we need to
add that to the amount of money that check_z_mergetoaddress at line 459
expects to find.
For consistency, we serialize the `finalState` field in the
same (sparse) encoding as Sapling and Sprout use. In the future
we may want to update this to the dense encoding that
incrementalmerkletree::bridgetree::Frontier uses, but that's not
necessary for the moment.
This adds tests to wallet_z_sendmany that demonstrates conditions
where pool-crossing transfers were not being caught by the privacy
policy checks, which were validating only against the transfer
request rather than the actual transfer selected. This missed
cases where sending funds between unified addresses would reveal
amounts via the turnstile.
Making all privacy policy checks after note selection guards against
this error.
If a new Orchard wallet is created after the first Orchard spend
post NU5 activation, it causes an assertion failure because the root
of the wallet's empty note commitment tree does not match the global
note commitment tree root.
The test fails during the final `z_sendmany`, because it is selecting a
note that was detected before restarting the node. Because we force the
wallet to call `SetBestChain` on every block, the wallet doesn't need to
rescan on restart, and thus doesn't repopulate the `position` field of
the in-memory note.
This issue went unnoticed in existing tests that exercise node restarts,
because the RPC tests are fast enough that they never pass the 10-minute
timeout for writing the wallet state. This commit adds a regtest-only
config option that disables the lazy writing.
Make consistent use of "pool", "address type" and "receiver type",
in RPC documentaion, and deprecate bare uses of "type" in RPC APIs.
Fixes#5534
Co-authored-by: str4d <thestr4d@gmail.com>
Orchard output ordering is no longer deterministic, as we now shuffle
spends and outputs during bundle building. But we _can_ still check that
the action index of a note being spent is correct.
Also fixes a bug in the `nuparams` helper, which would have caused MSB
zeroes in consensus branch IDs to not be rendered in the `-nuparams`
option. This hadn't been encountered because we haven't yet generated a
consensus branch ID with a zero MSB.
We need to bump the `zcashd` protocol version because the new rules are
not compatible with existing rules followed by 170015 nodes, but we
_also_ need to ensure we can still bump it again once we set the testnet
reactivation height (changing node network behaviour again). This commit
also enables RPC tests to run (because previously the nodes considered
each other to be too old for NU5 to be active, and were disconnecting).
This includes:
- `orchard =0.1.0-beta.3` which includes the final circuit changes.
- The new NU5 consensus branch ID.
- Updated ZIP 244 test vectors (which use the NU5 consensus branch ID).
- The legacy_random source should only contain Sprout addresses (as
zcashd now only derives transparent addresses from the mnemonic seed).
- Sapling addresses should appear in the mnemonic_seed source, not the
legacy_seed source (as zcashd no longer ever generates keys there).
The RPC test also now has several additional checks:
- `listaddresses` does not return duplicate addresses (an address can
only come from a single source).
- Address sets are now explicitly checked (to ensure that there are no
unexpected addresses under the checked sources).
We now have a full roster of privacy policies. We can graph the
relationships between the policies; arrows point from more-private to
less-private, and each policy is permitted to reveal information covered
by all policies pointing to it (in addition to the extra information it
is permitted to reveal).
FullPrivacy
v
AllowRevealedAmounts
v v
AllowRevealedRecipients ---- AllowRevealedSenders
v / v
AllowFullyTransparent <- AllowLinkingAccountAddresses
v v
NoPrivacy
The synthetic `LegacyCompat` policy now uses the `AllowFullyTransparent`
policy for backwards compatibility, and the `FullPrivacy` policy if the
sender or recipients involve Unified Addresses.
Closeszcash/zcash#5677.
Closeszcash/zcash#5678.
This replaces the bool argument with a string argument, enabling us to
add additional privacy strategies. We also alter the default to be
backwards-compatible with existing RPC method usage, by only enabling
the strongest checks if a Unified Address is involved.
Closeszcash/zcash#5676.
Prior to this change, calling `join_network` after a network split
only worked in the case that no new non-coinbase transactions were
created during the network partition; in the case that such a
transaction was created, `join_network` would fail when waiting
for mempool synchronization, because zcashd nodes do not.
automatically broadcast their mempool contents on restart.
This change modifies `setup_network` to wait for mempool synchronization
or not on the basis of a newly added do_mempool_sync flag. In the
case of `join_network`, this flag is set to `False`; the default value
is set to `True` to preserve previous functionality elsewhere.
Tests should explicitly use the `resendwallettransactions` RPC method
to ensure that mempool transactions are rebroadcast before attempting
to synchronize the network after a `join_network` call.
We can't actually test rollback via RPC tests until
wallet persistence is implemented. This implements
a rollback scenario that will should pass after wallet
persistence is implemented.
The addition of `OrchardRawAddress` to `RecipientAddress` drives most of
the changes in this commit, which enable `z_sendmany` to send funds to
addresses in the Orchard pool once NU5 activates.
We also add Orchard-specific information to several RPCs in order for
tests to pass:
- `z_listunifiedreceivers`
- `z_getbalanceforaccount`
- `z_getbalanceforviewingkey`
This fixes a potential bug with importing the mnemonic into a third
party transparent wallet. Previously, if a user called `getnewaddress`,
made a bunch of transactions that generated at least 20 change
addresses, and then called `getnewaddress` again, the two external
addresses would be separated by a gap of more than 20. If this mnemonic
were imported into a third party transparent wallet, the wallet would
not detect any funds in the second (or subsequent) transparent addresses
because it would detect 20 unused addresses in a row (via the BIP 44
default gap limit).
Now, we track external and internal keys separately; repeated calls to
`getnewaddress` will return addresses for sequential keys. This has the
added benefit that the sequence of `getnewaddress` outputs will be the
same after restoring from a backup.
We also add a `type` field to the output objects (matching the field in
`z_viewtransaction`), now that the output type can't be distinguished
solely from the address encoding.
Jack Grigg
str4d
Kris Nuttycombe
Taylor Hornby
Kris Nuttycombe
Larry Ruane
sasha
sasha
therealyingtong
Steven
str4d
Daira Hopwood
Marshall Gaucher
Steven Smith
zancas
Charlie O'Keefe